BRENNEN

Industries / Energy, water and waste / Carbon capture

Capture at the plant

Separating carbon dioxide from the exhaust or process gas of a power station or factory before it reaches the air, most often by washing the gas with a liquid that takes up CO2 and gives it back when heated.

5

Milestones achieved, from 1930 to 2016.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1930

    Amines take up CO2

    Robert Roger Bottoms of the Girdler Corporation in Louisville, Kentucky, patented a process in 1930 in which a liquid containing an amine, a compound related to ammonia, absorbs acidic gases, which the patent names as carbon dioxide, sulfur dioxide and hydrogen sulfide. The liquid is then heated in a second vessel, the regenerator, to drive the gas off, cooled and sent back to absorb more, in a closed loop. Petra Nova in Texas and Huaneng's Longdong plant in China, below, both capture CO2 with amine solvents in this loop.

    patents.google.comosti.gov

    Credit

    Robert Roger Bottoms, The Girdler Corporation

  2. 1999

    Capture to make fertilizer

    The Intergovernmental Panel on Climate Change (IPCC) reported in 2005 that three amine processes for taking CO2 out of flue gas, the exhaust of burning fuel, were sold commercially: Kerr-McGee/ABB Lummus Crest, Fluor Daniel's Econamine and the process of Kansai Electric Power and Mitsubishi Heavy Industries (MHI). The first commercial Kansai–MHI plant had recovered 200 tonnes of CO2 a day from flue gas in Malaysia since 1999, for making urea fertilizer. The IPCC found such plants made CO2 for food, drinks and chemicals at 6 to 800 tonnes a day, and would have to be scaled up 20 to 50 times to serve a 500 MW power station.

    LessonCapture began as a way to make CO2 to sell, at sizes far below what a power station needs.

    ipcc.ch

    Credit

    Kansai Electric Power and MHI; assessment by IPCC Working Group III, coordinating lead authors Kelly Thambimuthu, Mohammad Soltanieh and Juan Carlos Abanades

  3. 2013

    A "moon landing" dropped

    In his New Year address of 2007, Norway's prime minister Jens Stoltenberg said the gas power plant at Mongstad, north of Bergen, would have full-scale carbon capture and storage within seven years, and called it "our moon landing." On 20 September 2013 Statoil (now Equinor) announced that the full-scale project was stopped. Technology Centre Mongstad, which Statoil, the state company Gassnova, Shell and Sasol completed beside the refinery in 2012 to test capture methods on two kinds of flue gas, kept running.

    LessonA deadline set before the costs were known did not survive them, while the smaller test centre built alongside it kept working.

    equinor.industriminne.noequinor.comtcmda.com

    Credit

    The Norwegian government, Statoil and Gassnova

  4. 2014

    Capture at a coal unit

    In the fall of 2014 SaskPower began capturing CO2 from Unit 3 of its Boundary Dam coal power station near Estevan, Saskatchewan, a 115 MW unit designed to capture up to 90% of its CO2. SaskPower calls it the first power station in the world to use carbon capture and storage successfully. In 2024 David Schlissel of the Institute for Energy Economics and Financial Analysis (IEEFA) calculated that, counting all the unit's emissions, including flue gas vented without passing through capture, it had captured 57% on average. A 2022 report by the International CCS Knowledge Centre, which helped design the plant, said it had "not sustained the design rate beyond a dedicated capacity demonstration completed in 2015." SaskPower reports that the capture plant was available 98.4% of the time in the first quarter of 2025 and captured 834,232 tonnes in the year to March 2025, its third year in a row above 800,000 tonnes.

    LessonThe share of CO2 removed from the gas that passes through the capture unit is not the plant's capture rate; what counts is the share of all the plant's CO2 captured, year after year.

    saskpower.comglobalnews.casaskpower.com

    Credit

    SaskPower

  5. 2016

    Petra Nova at full scale

    Petra Nova, owned by NRG Energy and JX Nippon, began commercial operation on 29 December 2016 at the W.A. Parish power station near Houston, Texas. It treats a slipstream of flue gas equal to 240 MW from coal-fired Unit 8 with MHI's KM-CDR amine process and, at full rate, captures about 5,200 short tons of CO2 a day, which goes by pipeline to the West Ranch oil field to push out more oil. Its final report to the US Department of Energy (DOE), which paid part of the cost, says it was the largest post-combustion capture plant at a coal power plant to that date, and that in 2017–2019 it captured 3,542,537 tonnes and removed 92.4% of the CO2 in the gas it treated. The gas-fired unit built to power it caused about 88 days of extra capture outages. NRG shut the plant in May 2020 because of low oil prices and mechanical problems; JX Nippon, sole owner since September 2022, restarted it on 5 September 2023.

    LessonWhere captured CO2 is sold to push out oil, the capture plant runs only while oil prices cover its costs.

    osti.govogj.com

    Credit

    NRG Energy, JX Nippon, MHI and the US DOE

Watch for

  1. Largest coal-unit capture

    China Huaneng Group's Longdong Energy Base project at Zhengning, Gansu Province, began operating in September 2025. It captures CO2 from a 1 GW coal unit and is designed for 1.5 million tonnes a year: about 1 million tonnes for enhanced oil recovery at the Changqing oil field and about 0.5 million tonnes injected into a saline formation, a deep layer of salty rock, about 3 km down. The Global CCS Institute calls it the world's largest post-combustion capture plant on a coal power station. Huaneng's Clean Energy Research Institute (HNCERI) says its HNC7 solvent needs 2.0–2.3 GJ of heat per tonne of CO2, about 40% less than conventional solvents, and that capture costs about US$30 a tonne before compression.

    Achieved whena full year of captured and stored tonnes, and the measured heat used per tonne, are published and checked by someone outside Huaneng.

    globalccsinstitute.com

    Claimed by

    China Huaneng Group's HNCERI, reported by the Global CCS Institute, September 2026

Open

  1. 01

    Fault log for capture plants

    A public record of every reported outage, slowdown and shutdown at the large capture plants that have run for years, starting with Boundary Dam 3 and Petra Nova and adding Quest and others. Each event gets its dates, the days or tonnes lost, the part that failed (for example the CO2 compressor, a heat exchanger, the absorber, the solvent, the host plant, the power supply or the buyer of the CO2), and a link to its source.

    The brief
    Credit · unclaimed
  2. 02

    Capture unit on or off

    A tool that says, from free satellite images, whether a named capture unit was running on a given day, starting with Boundary Dam 3, where SaskPower's quarterly figures can be used to score it, then plants that publish little, such as Longdong.

    The brief
    Credit · unclaimed

Open 01 · the brief

Fault log for capture plants

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public record of every reported outage, slowdown and shutdown at the large capture plants that have run for years, starting with Boundary Dam 3 and Petra Nova and adding Quest and others. Each event gets its dates, the days or tonnes lost, the part that failed (for example the CO2 compressor, a heat exchanger, the absorber, the solvent, the host plant, the power supply or the buyer of the CO2), and a link to its source.

Why it is still open

The causes are published plant by plant, in different forms. Petra Nova's final report gives its own split for 2017–2019, with the capture plant behind 28% of outage days, its gas-fired power unit 24% and the host coal unit 16%, and traces scaling to compressor intercoolers made of the wrong materials. SaskPower's quarterly updates give Boundary Dam's availability and tonnes, with notes on maintenance, but no common list of causes. IEAGHG's 2020 review of 22 projects, prepared by Element Energy from documents and 24 interviews, draws its lessons in prose and keeps no event-by-event record. Searches of the web, Crossref and GitHub found no cross-plant record coded by cause.

osti.govsaskpower.comieaghg.org

Built with what exists

SaskPower's BD3 status updates; the Petra Nova final report (OSTI 1608572); Quest's annual reports to the Alberta government; papers from Technology Centre Mongstad and the International CCS Knowledge Centre; a document-reading AI model to pull events out of PDF reports for a person to check (see the Note "Seven more flagged"); a model that answers fixed-choice questions to propose a cause code for each event, such as Gemini Decision 1 (see the Note "A thousand questions, one pass"); a spreadsheet or SQLite file.

  1. First step

    Enter the outages described in Petra Nova's report for 2017–2019 and check that the totals match its 28%, 24% and 16% split.

  2. Done looks like

    At least 150 events from at least four plants, each with dates, losses, a cause code and a source link, published with the code list. A second person codes a random 30 events without seeing the first codes and agrees on at least 85% of them.

Open 02 · the brief

Capture unit on or off

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tool that says, from free satellite images, whether a named capture unit was running on a given day, starting with Boundary Dam 3, where SaskPower's quarterly figures can be used to score it, then plants that publish little, such as Longdong.

Why it is still open

A 2024 study by Heather Couture and colleagues for Climate TRACE trained machine learning models on the water vapor plumes of power stations in Landsat 8, Sentinel-2 and PlanetScope images to estimate how much power each plant generates. It estimates generation, not whether a capture unit attached to the plant is running. Carbon Mapper has published CO2 plumes seen by its Tanager-1 satellite since February 2025, 970 of them from power plants in the first year, but each is a snapshot of one stack at one moment, not a running record of a capture unit. SaskPower publishes Boundary Dam's capture availability only by quarter, and Huaneng has published no running record for Longdong. Searches of the web, Crossref and GitHub found no tool aimed at capture units.

doi.orgcarbonmapper.orgsaskpower.com

Built with what exists

Sentinel-2 and Landsat 8/9 images from the Copernicus Data Space or Google Earth Engine; the plume method published by Couture and colleagues; Carbon Mapper's public CO2 plume data as a second signal; a vision-language model (one that reads images as well as text) for a first label on each image, checked by a person; SaskPower's quarterly availability figures and Petra Nova's reported outages as the answers to score against; Python.

  1. First step

    Pull every cloud-free Sentinel-2 image of Boundary Dam for 2024 and 2025 and mark by eye which stacks show a plume, to see whether the capture unit's stack can be told apart from the main stacks.

  2. Done looks like

    For Boundary Dam 3 from 2019 to 2025, a call of running, not running or no clear image for every satellite pass, published with code. Summed by quarter, the calls come within 10 percentage points of SaskPower's reported availability in at least 80% of quarters.