Industries / Consumer goods / Sporting goods / Bicycles
Frames
Frame making designs, builds and tests the frame and fork, the structure every other part of a bicycle is bolted to, in steel, aluminum, titanium or carbon fiber composite.
5
Milestones achieved, from 1897 to 2014.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1897
Tubes thicker at the joints
A frame carries its highest loads where its tubes are joined. In 1897 Alfred Milward Reynolds and J. T. Hewitt of Birmingham, England, filed a patent for butting, a way of drawing a tube so that its wall is thicker at the ends than in the middle, and the Patent Butted Tubing Co. was set up on 20 December 1898 with 25 staff, by the account of the company's successor, Reynolds Technology. A typical double-butted tube today is 0.8 mm thick at each end and 0.5 mm in the middle, with the outside diameter unchanged, so weight comes out of the middle of the tube while the joints keep their wall.
Credit
Alfred Milward Reynolds and J. T. Hewitt; the Patent Butted Tubing Co., now Reynolds Technology
1986
Carbon fiber wins the Tour
Carbon fiber composite is thin fibers of carbon held in hardened resin; laid in chosen directions, it makes a frame stiff where it needs to be and light elsewhere. ALAN of Padua, Italy, had glued carbon tubes from Toray into aluminum lugs for its main triangles from 1976, and early glued frames could suffer bonding failures, by road.cc's account. Look, a French maker of ski bindings and pedals, built the KG 86 by hand at Nevers, with tubes from TVT, a firm that wrapped carbon sheets around a pressurized bladder, Kevlar added for stiffness, and aluminum lugs. Greg LeMond rode it to win the 1986 Tour de France, which road.cc calls the first Tour won on a frame not made of steel since the race began in 1903. In 1990 Look made the KG 196, its first frame molded in one piece, by Look's own account.
Credit
Look; TVT (Technique du Verre Tissé); Greg LeMond
1996
Rules freeze the diamond
Carbon fiber let designers drop the old frame of two triangles. Chris Boardman won the 1992 Olympic individual pursuit on the Lotus 108, a one-piece carbon frame, the Lotus 110 that followed had no down tube, and bikes with a smaller front wheel were raced in Tour de France time trials. The Union Cycliste Internationale (UCI), cycling's world governing body, answered with the Lugano Charter of 1996, which says the sport is to bring riders together "to compete on an equal footing and thereby decide which of them is physically the best". Its rules still require a double-diamond frame with a separate down tube, wheels of equal size and a bike of at least 6.8 kg. A later rule that no tube be more than three times as deep as it is wide was replaced in 2017 by boxes 80 mm deep and 10 mm wide that frame tubes must fit inside.
LessonA racing body's rule book shapes ordinary bikes too; in BikeRadar's account, brands design new bikes to fit UCI rules even when most of them will never be raced.
Credit
the UCI
2012
A frame built by robots
BMC of Grenchen, Switzerland, spent more than €40 million ($51.8 million) and four years on materials, robot processes and a new factory for its impec frame, because its owner, Andy Rihs, held that frames hand-laid in Asia from prepreg (carbon cloth already soaked in resin) allowed too little process control. In the impec line, robots fed mandrels (removable cores) into a radial braiding machine from August Herzog Maschinenfabrik that braided carbon fiber into tubes, moved the braid into molds where resin was injected and cured, and applied measured amounts of adhesive to join the tubes with molded connectors, as CompositesWorld reported at the end of 2012. Ten years later CompositesWorld found hand layup still the norm: some factories make 500,000 frames a year, and a frame can take 400 or more hand-laid pieces of prepreg.
LessonAutomating one premium frame line did not displace hand layup, which CompositesWorld still described in 2022 as the most time- and cost-efficient way to make a frame's complex shape.
Credit
Andy Rihs and BMC; August Herzog Maschinenfabrik
2014
One world test for frames
Before 2014, Europe had three separate safety standards for different kinds of bicycle. In 2014 the multi-part ISO 4210 series, Cycles: Safety requirements for bicycles, replaced all three, EN 14764, EN 14766 and EN 14781, as the British Standards Institution's edition records. Part 6 sets the frame and fork test methods, which DIN describes as designed "to ensure the strength and durability of individual parts as well as of the bicycle as a whole". Part 6 reached its third edition in January 2023.
Credit
ISO and the European standards body CEN; for the UK, BSI's committee GME/25
Watch for
The frame rules reviewed
The UCI announced in September 2026 a review of the principles behind its equipment rules, which since the 1996 Lugano Charter have fixed the frame's shape and a minimum weight of 6.8 kg. A new document is due in 2027; asked for details, the UCI told Cycling Weekly that "further details will be communicated in due course".
Achieved whenthe UCI publishes new technical rules for frames and they apply in its races.
Claimed by
the UCI, September 2026
Open
01
An open frame fatigue bench
A bench rig, with published drawings, parts list and control code, that holds a frame in a fixture and loads it over and over, the way the frame tests of ISO 4210-6 do, logging force on every cycle and the cycle count at the first crack. Repeated-load testing of this kind is called fatigue testing. Then a public table of results for new frames and for used frames of the same models, so riders and shops can see how much life a used frame has given up.
The briefCredit · unclaimed02
Robots for post-mold finishing
A robot cell that removes flash (the resin squeezed out at a mold's seams) and sands a cured carbon frame ready for paint, following a path planned from a 3D scan of that frame, with the sanding force controlled so the wall is not cut into. Then a timed comparison with hand finishing.
The briefCredit · unclaimed
Open 01 · the brief
An open frame fatigue bench
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench rig, with published drawings, parts list and control code, that holds a frame in a fixture and loads it over and over, the way the frame tests of ISO 4210-6 do, logging force on every cycle and the cycle count at the first crack. Repeated-load testing of this kind is called fatigue testing. Then a public table of results for new frames and for used frames of the same models, so riders and shops can see how much life a used frame has given up.
Why it is still open
Test labs run these tests for brands, and the results stay with the brand. The only open effort found, a University of Brighton wiki by Covill and colleagues meant as "an open source online platform" for frame and joint test rigs, has drawn a fixture for the ISO 4210-6 horizontal-force test but still marks its results, open-access release and conclusions "do this later". The standard itself is sold by ISO; Part 6 is in its third edition, of 2023. A search found only patents and single student rigs, with no open design and frame results.
Built with what exists
Aluminum extrusion for the rig frame, as in the Brighton design; pneumatic cylinders with electro-pneumatic pressure regulators, such as the SMC ITV series the Brighton wiki names; load cells; an Arduino or Raspberry Pi to run the cycles and log force; Python for the analysis; a copy of ISO 4210-6; a steel guard cage, since a frame can let go suddenly when it fails.
First step
Buy ISO 4210-6, build the horizontal-force fixture from the Brighton drawings, and run one scrap steel frame from a bike shop.
Done looks like
Drawings, code and raw logs published under an open license; ten frames run to the standard's cycle count or to failure; and, for at least three frame models also tested at an accredited lab, the same pass or fail result from the open rig.
Open 02 · the brief
Robots for post-mold finishing
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot cell that removes flash (the resin squeezed out at a mold's seams) and sands a cured carbon frame ready for paint, following a path planned from a 3D scan of that frame, with the sanding force controlled so the wall is not cut into. Then a timed comparison with hand finishing.
Why it is still open
In the Asian frame factories that Dustin Adams of We Are One observed, he estimated that 50% to 60% of the labor comes after molding: removing flash, sanding, machining, assembly and surface preparation. Robot sanding and deflashing have existed for 30 years or more, but programming paths for contoured parts takes much of a cell's cost, by the account of the robot industry association A3. The nearest bicycle case found is in repair: Carbon Bike Repair uses a CNC Robotics machining system guided by a 3D scan to shape repaired frames after technicians wrap new carbon by hand. A search found no production cell that finishes new frames.
Built with what exists
A collaborative robot arm with a force-controlled sanding tool, such as Robotiq's sanding kit for Universal Robots arms, which A3 reports cuts the programming of contoured surfaces from hours to minutes; a handheld 3D scanner; path-planning software working from the scan; wet sanding in a closed cell with dust extraction, since carbon dust must not be breathed; an ultrasonic thickness gauge and a surface roughness tester.
First step
Ask a local carbon repair or frame shop for three molded frames or offcuts with flash, scan them, and time a person finishing one.
Done looks like
Ten frames from one mold finished by robot and ten by hand, with time per frame, surface roughness at 20 marked points and wall thickness removed at the same points, and the robot inside the hand-finished range on all three measures.