BRENNEN

Industries / Consumer goods / Sporting goods

Bicycles

The bicycle industry designs, makes, sells, repairs and rents out bicycles and e-bikes, from the frame and its parts to the motor and battery of an electric bike, the shop that services it and the city schemes that lend it by the ride.

1817

On 12 June 1817 Karl Drais rode his Laufmaschine ("running machine"), a two-wheeler with no pedals that the rider pushed along with the feet, from his house in Mannheim to the Schwetzinger Relaishaus, a coaching inn about 7 km away, and back in just under an hour, about 15 km/h, by the account of Baden-Württemberg's transport ministry. The machine weighed 22 kg.

beteiligungsportal.baden-wuerttemberg.de

35

Milestones achieved across 6 domains.

8

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Drais's wooden running machine of 1817 had two wheels in line and a steering bar but no pedals. Cranks on the front wheel came with Pierre and Ernest Michaux's velocipede, shown at the 1867 Paris World Exhibition, by the same account. By the 1890s makers such as Albert Pope in Connecticut were building bicycles by the thousand in plants borrowed from the sewing-machine trade, and the steel frame of butted tubes (1897) and the gears sealed in the hub (1902) followed within a few years.

Where it stands

China made 110.8 million bicycles in 2025 and exported nearly 48.94 million of them, by figures the China Bicycle Association released in May 2026 (China Daily). Europe made 10.82 million bicycles and e-bikes in 2025 and sold 15.62 million, worth €18.25 billion, by the count of European Cycling Industries, the trade body formed from CONEBI and Cycling Industries Europe (ECI). In Germany e-bikes have outsold bicycles without a motor since 2023, by the industry association ZIV's figures (electrive), and an engineer at Santa Cruz Bicycles estimated in 2022 that Asian makers produce close to 99% of carbon frames, each laid up by hand from 400 or more pieces of resin-soaked carbon cloth (CompositesWorld).

What is open

Much of what would show whether a bicycle is sound stays inside factories and test labs: how long a frame survives repeated loads, how closely rims and tires match their stated sizes, what a "250 W" motor really delivers and which part fits which bike. Other open jobs are hand work no robot has taken over, such as sanding molded carbon frames and finishing a boxed bike. Bike-share journey files and live feeds, phone cameras, low-cost test rigs and AI models that read documents are enough to start on most of them.

Domains

AchievedWatch forOpen

Advances to build with

2 research notes

Open in bicycles

3 of 12 open deliverables

Open · Frames

An open frame fatigue bench

A bench rig, with published drawings, parts list and control code, that holds a frame in a fixture and loads it over and over, the way the frame tests of ISO 4210-6 do, logging force on every cycle and the cycle count at the first crack. Repeated-load testing of this kind is called fatigue testing. Then a public table of results for new frames and for used frames of the same models, so riders and shops can see how much life a used frame has given up.

Built with what exists

Aluminum extrusion for the rig frame, as in the Brighton design; pneumatic cylinders with electro-pneumatic pressure regulators, such as the SMC ITV series the Brighton wiki names; load cells; an Arduino or Raspberry Pi to run the cycles and log force; Python for the analysis; a copy of ISO 4210-6; a steel guard cage, since a frame can let go suddenly when it fails.

Credit · unclaimed

Open · Components

A thousand fit questions

A public test set of 1,000 "will this part fit this bike" questions, covering cassettes and freehubs (the hub part a cassette slides onto), chains, cranks and bottom bracket shells, brake rotors and calipers, axles, and tires and rims. Each is answered yes, no, or "depends", with the condition, by two mechanics working separately, and each answer is tied to a maker's document. Then score AI models and published compatibility checkers on it.

Built with what exists

Makers' compatibility documents, such as Shimano's compatibility pages and SRAM's and Park Tool's guides; Label Studio for labeling; Python with scikit-learn to measure how often the two mechanics agree (Cohen's kappa); AI models such as Claude, and Gemini Decision 1, which returns probabilities for up to 1,000 yes/no or multiple-choice questions in one request (see the Note "A thousand questions, one pass").

Credit · unclaimed

Open · Assembly

A robot finishes boxed bikes

A robot cell that does the last assembly of a bicycle shipped in a box: fit the handlebar to the stem, fit the front wheel, pedals and saddle, and tighten each bolt to the maker's torque with a torque driver. Train it from a few dozen recorded demonstrations, and publish the task list, the recordings and a success count.

Built with what exists

Two collaborative arms with wrist cameras, such as Universal Robots UR5e; a digital torque screwdriver that logs each tightening; Hugging Face's LeRobot software to record and train (see the Note "No download"); an open robot model to fine-tune, such as Runway's Praxis-1 (see the Note "Open robot model weights"), with NVIDIA's own figure of 95% success after five demonstrations for its GR00T 2 model as the bar to test against (see the Note "Five demonstrations per task"); boxed bikes of one model.

Credit · unclaimed

Where it sits