BRENNEN

Industries / Consumer goods / Sporting goods / Bicycles

Components

Components are the parts fitted to a frame to make a bicycle ride, shift and stop, such as gears and chain, brakes, wheels and tires, pedals and suspension, most of them made by a few specialist firms.

7

Milestones achieved, from 1902 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1902

    Gears hidden inside the hub

    A hub gear keeps its gears sealed inside the rear wheel's hub, away from rain and dirt. Frank Bowden, who had bought a bicycle company named for its first home on Raleigh Street in Nottingham, England, had his engineers develop the first Sturmey-Archer three-speed hub in 1902, working with patents from Henry Sturmey and James Archer, by Sturmey-Archer's account. Production moved to Taiwan in 2000, and the company is now Sun Race Sturmey-Archer.

    sturmey-archer.com

    Credit

    Henry Sturmey, James Archer and Frank Bowden

  2. 1984

    Ski bindings become pedals

    Racers' feet were held to the pedals by toe clips and leather straps. In 1984 Look, then a maker of ski bindings, adapted its binding to cycling as the PP65, which Look calls the first automatic pedal: one that holds the shoe in place of the straps. Bernard Hinault debuted it in the 1985 Tour de France, by road.cc's account, and won that Tour, by Look's. TIME, founded in Nevers, France, in 1987, added float, a little free sideways and turning movement of the foot on the pedal, by the account of SRAM, which bought TIME's pedal range in 2021.

    lookcycle.comroad.ccsram.com

    Credit

    Look; TIME

  3. 2012

    One chainring is enough

    A front derailleur shifts the chain between two or three chainrings at the cranks. SRAM's XX1 mountain bike group, on sale from October 2012, used one chainring with an 11-speed cassette, the stack of rear sprockets, running from 10 to 42 teeth on its own freehub body, which BikeRadar reported gave the lowest low gear and highest high gear of any single-ring setup then available. The chainring's teeth alternate narrow and wide so that they hold the chain without a guide. In 2016, with its twelve-speed Eagle groups giving a 500% gear range, SRAM "officially declared the death of the MTB front derailleur", by its own account.

    bikeradar.comsram.com

    Credit

    SRAM

  4. 2015

    A lever meets the disc

    On 21 April 2015 Trek and the US Consumer Product Safety Commission (CPSC) recalled about 900,000 bicycles in the US and 98,000 in Canada, all Trek models from 2000 to 2015 with front disc brakes and a quick-release lever, the clamp that lets a wheel come off without tools, that opens a full 180 degrees. An open lever could catch the disc brake, stopping the front wheel or letting it come off. Trek reported three incidents, all with injuries, one of which left a rider quadriplegic. Owners got a new quick release free.

    LessonTwo parts that each work alone can fail together, so whether parts fit each other is a safety question, not only a convenience.

    saferproducts.gov

    Credit

    Trek; the CPSC

  5. 2016

    Discs pulled from the peloton

    Disc brakes stop the wheel by gripping a metal disc at the hub rather than the rim. The UCI let its top road teams test them at two races each in August and September 2015, then allowed all professional road teams to use them in 2016. After the Movistar rider Francisco Ventoso suffered a deep cut to his leg at Paris-Roubaix in April 2016, from a disc rotor by his account, the teams' association AIGCP, backed by the riders' association CPA, asked for a halt, and the UCI suspended the trial "with immediate effect". In September 2016 it said the trial would not restart until the teams agreed; the Roompot team had already had to refit its riders with rim-brake frames.

    LessonA part can work well on one bike and still be refused when it is new to a pack of riders on mixed equipment.

    uci.orgcyclingnews.com

    Credit

    the UCI; the AIGCP and CPA

  6. 2021

    Parts run short

    When demand for bikes jumped in 2020, the largest brands placed orders with every factory, and lead times for parts and bikes from Asian factories went from the usual 45 to 60 days to 300, 350, 450 or even 540 days, Bicycle Retailer reported in March 2021. Small brands that ordered little and often were pushed to the back of the queue. Shimano, which Reuters estimated holds about two-thirds of the mid- to high-end groupset market (a groupset is the matched set of gears, brakes and cranks), said its 2021 output would be 50% above 2019 and invested in a new plant in Singapore.

    LessonWhen a few makers supply most of the parts, a jump in demand reaches every brand at once, and the smallest lose out first.

    bicycleretailer.comcyclingmagazine.ca

    Credit

    Shimano, for the added output; Bicycle Retailer's Steve Frothingham, for the reporting

  7. 2026

    A gear limit blocked

    The UCI adopted a rule limiting the largest gear in professional road races to 54×11 (a 54-tooth chainring driving an 11-tooth sprocket), to be tried first at the Tour of Guangxi from 14 October 2025. SRAM, which the Belgian Competition Authority (BCA) found was the only major maker without a product meeting the limit, complained. On 9 October 2025 the BCA suspended the rule, finding it and the way it was adopted not objective or transparent enough. In May 2026 the Brussels Court of Appeal rejected the UCI's appeal; Escape Collective reported that the court found the UCI had not consulted the makers affected or documented its reasoning.

    LessonAn equipment rule that falls on one maker has to be made in the open and backed by evidence, or competition law can stop it.

    bicycleretailer.comescapecollective.com

    Credit

    SRAM; the Belgian Competition Authority; the Brussels Court of Appeal

Watch for

  1. Wheels of 32 inches

    Schwalbe says it will launch 32-inch versions of two gravel tires in April 2027, in 50 mm and 55 mm widths, and that its testing shows better stability, traction and comfort; it points to Robin Gemperle winning Unbound XL on prototypes of the tires on a prototype Scott bike. A 32-inch wheel has a bead-seat diameter, the diameter at which the tire sits on the rim, of 686 mm, and Cycling Weekly found 32-inch forks, rims and tires from several makers at the Sea Otter and MADE shows in 2026; the size cannot be used in UCI road races, which cap a wheel at 700 mm.

    Achieved whena test by someone other than a tire, wheel or bike maker measures rolling resistance or time over rough ground against 29-inch wheels, and production bikes from more than one large brand are on sale.

    cyclingweekly.comcyclingweekly.com

    Claimed by

    Schwalbe, September 2026

Open

  1. 01

    A thousand fit questions

    A public test set of 1,000 "will this part fit this bike" questions, covering cassettes and freehubs (the hub part a cassette slides onto), chains, cranks and bottom bracket shells, brake rotors and calipers, axles, and tires and rims. Each is answered yes, no, or "depends", with the condition, by two mechanics working separately, and each answer is tied to a maker's document. Then score AI models and published compatibility checkers on it.

    The brief
    Credit · unclaimed
  2. 02

    Rim and tire fit, measured

    A public table of measured bead-seat diameters of tubeless rims and bead diameters of tubeless tires, five or more retail samples per model, set against the tolerances in the ISO 5775 and ETRTO standards, with the force needed to mount each tire at zero pressure. Pairs that come out loose are flagged.

    The brief
    Credit · unclaimed

Open 01 · the brief

A thousand fit questions

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test set of 1,000 "will this part fit this bike" questions, covering cassettes and freehubs (the hub part a cassette slides onto), chains, cranks and bottom bracket shells, brake rotors and calipers, axles, and tires and rims. Each is answered yes, no, or "depends", with the condition, by two mechanics working separately, and each answer is tied to a maker's document. Then score AI models and published compatibility checkers on it.

Why it is still open

Bike Matrix, a commercial service started by two mechanics and a software developer, checks fit for 106,357 bikes across 18 categories inside retailers' websites; no accuracy figure was found on its pages. A trade report says it runs up to 56 checks on a crankset against 11 other parts. The open site bikecompat answers 31 questions, each with its source. No open, mechanic-labeled set large enough to measure an AI model's answers was found.

bikematrix.iobike-eu.combikecompat.pages.dev

Built with what exists

Makers' compatibility documents, such as Shimano's compatibility pages and SRAM's and Park Tool's guides; Label Studio for labeling; Python with scikit-learn to measure how often the two mechanics agree (Cohen's kappa); AI models such as Claude, and Gemini Decision 1, which returns probabilities for up to 1,000 yes/no or multiple-choice questions in one request (see the Note "A thousand questions, one pass").

  1. First step

    Start from bikecompat's 31 questions, write 100 more on bottom brackets and freehubs from Shimano and SRAM documents, and have two mechanics answer them separately.

  2. Done looks like

    The 1,000 questions published under an open license with the mechanics' agreement score, and the accuracy of at least three AI models and one checker by category, with the share of "it fits" answers that were wrong reported on its own, since that is the costly mistake.

Open 02 · the brief

Rim and tire fit, measured

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of measured bead-seat diameters of tubeless rims and bead diameters of tubeless tires, five or more retail samples per model, set against the tolerances in the ISO 5775 and ETRTO standards, with the force needed to mount each tire at zero pressure. Pairs that come out loose are flagged.

Why it is still open

BikeRadar wrote in 2023 that "the safety of a rim-tyre interface is heavily dependent on the tolerances of the two components". ENVE measures bead stiffness and diameter on a machined aluminum test rim, and Giant and ENVE publish lists of tires that passed their tests, but the measurements behind the lists were not found published. The tire maker Rene Herse Cycles publishes the bead-seat diameter and bead-seat height of rims it has measured and flags those outside the standard, but writes that it cannot measure all rims and does not know "how much variation there is between individual rims", and it gives no tire measurements. After pictures of tires off hookless rims (rims without a lip to hold the tire bead) at the UAE Tour and Strade Bianche in 2024, which the makers put down to impacts, the experts TOUR magazine spoke to called the standard's test, that a tire hold 110% of its maximum pressure for five minutes, inadequate. A search found no public table of several samples per model, rims and tires together.

bikeradar.combikeradar.comrenehersecycles.comtour-magazin.de

Built with what exists

A precision diameter tape and digital calipers; a machined or 3D-printed tapered gauge ring; a load cell on a lever to measure mounting force; a spreadsheet; ISO 5775-2 (2021) and the ETRTO standards manual. No inflation to failure: blow-off tests at high pressure are dangerous and stay in makers' labs.

  1. First step

    Measure the bead seat of ten rims in a local shop's stock with a diameter tape, twice each, to learn how repeatable the method is.

  2. Done looks like

    Twenty rim models and twenty tire models, five samples each, each measured twice by two people, with the repeatability stated, the table published, and the share of samples outside the stated tolerance.