BRENNEN

Industries / Construction and property / Heavy civil / Asphalt production

Warm mix

Warm mix asphalt is mix made at lower temperatures than ordinary hot mix, often 20 to 55 °C lower, by foaming the binder with water or by adding waxes or chemicals that keep the mix workable as it cools.

6

Milestones achieved, from 1956 to 2026.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1956

    Bitumen foamed with steam

    Ladis Csanyi of Iowa State University found that steam injected into hot asphalt binder made it foam, and that the foam could coat cheap local sands and soils to make low-cost mixes. Mobil Oil later made the foam with atomized cold water instead, the method still used, but patents and other factors kept foamed binder out of common use until the early 1990s. Plant foaming for warm mix uses the same effect: water turns to steam inside the hot binder and briefly swells it.

    LessonA useful process can sit unused for decades while patents and licensing stand in the way.

    sll.dot.state.mn.uspublications.iowa.gov

    Credit

    Ladis H. Csanyi, Iowa State University; Mobil Oil

  2. 2007

    Americans study European practice

    In May 2007 a 13-member US team sponsored by FHWA, the American Association of State Highway and Transportation Officials (AASHTO) and NCHRP visited Belgium, France, Germany and Norway. It found warm mixes made 20 to 55 °C cooler than hot mix with processes such as WAM-Foam (Kolo Veidekke and Shell Bitumen), the zeolite Aspha-min, a mineral that releases water into the hot mix (Eurovia and MHI, about 300,000 tons), and Sasobit wax (Sasol, more than 10 million tons worldwide). The team judged warm mix viable and recommended that US agencies accept it at the contractor's choice, but found it used less in Europe than expected, partly because it still cost more than hot mix.

    LessonA process that works still spreads slowly while it costs more than the one it replaces.

    international.fhwa.dot.govinternational.fhwa.dot.gov

    Credit

    FHWA International Technology Scanning Program

  3. 2010

    Warm mix goes federal

    FHWA chose warm mix in 2010 as one of the first technologies in Every Day Counts, its program to speed proven methods into federal-aid, state and local road work, and since 2009 NAPA and FHWA have surveyed producers every year on how much they make. In 2011 plant foaming, in which a plant injects a little water into the hot binder, made up about 77.7% of US warm mix.

    rosap.ntl.bts.gov

    Credit

    FHWA; NAPA

  4. 2016

    No stripping in the field

    Stripping is the loss of the bond between binder and stone when water gets between them, and the 2007 scan team recommended that warm mix producers handle and store their stone so as to keep its moisture low. Haifang Wen, Shihui Shen, Louay Mohammad and colleagues compared warm and hot mix on 28 US projects in different climates, with different technologies, ages and traffic, and found no moisture damage or raveling in the field. In Hamburg wheel-tracking tests on samples from those roads, however, most mixes made without an antistripping additive showed signs of stripping, so the authors advise adding one.

    repository.lsu.eduinternational.fhwa.dot.gov

    Credit

    Haifang Wen, Shenghua Wu, Louay N. Mohammad, Weiguang Zhang, Shihui Shen and Ahmed Faheem, in Transportation Research Record

  5. 2024

    Warm mix made hot

    US producers made 178.3 million tons of mix with warm mix technologies in 2024, 40.2% of all mix, by the NAPA and FHWA survey, but only 48.7% of that tonnage was made at least 10 °F (5.6 °C) cooler than usual. Producers also use the additives at full heat because they help compaction, workability and resistance to stripping, and averaged over all US mix, production ran 4.8 °F (2.7 °C) cooler. Chemical additives made up about 80% of warm mix technology use and plant foaming had fallen to nearly 18%. In Europe, the countries with complete figures reported to EAPA averaged a warm mix share of 14.6%.

    LessonThe tonnage made with a warm mix product says little about fuel saved; the temperature drop does.

    rosap.ntl.bts.goveapa.org

    Credit

    NAPA; FHWA; EAPA

  6. 2026

    Germany makes it standard

    Germany's Committee on Hazardous Substances (AGS) set a binding workplace limit of 1.5 mg/m³ for fumes and aerosols from bitumen, published in its TRGS 900 rules in March 2020, with rolled road asphalt exempt until 31 December 2026. In 2026 Germany's technical rules for asphalt roads (ZTV Asphalt-StB and TL Asphalt-StB) made temperature-reduced rolled asphalt the standard method, and a contractor who does not use it must justify that in its risk assessment, according to BG BAU, the construction trade's statutory accident insurer. EAPA's estimates of German warm mix output rose from 0.5 million tonnes in 2022 to more than 4 million tonnes in 2024.

    LessonBG BAU warns that lower temperatures alone are not expected to keep fumes reliably under the limit, so pavers also need fume extraction.

    bgbau.deeapa.org

    Credit

    AGS; BG BAU; German road authorities

Watch for

  1. A council counts the carbon

    A trial on Hirst Road in North Lanarkshire, Scotland, under Live Labs 2, a UK Department for Transport program, laid a Holcim warm mix surface beside a hot-rolled asphalt control, both 50 mm thick. The evaluation puts the warm mix at 8.39 kg of carbon dioxide equivalent (CO2e) per m² against 9.19 for the control, about 9% less from raw materials to laying. Its plant figures come from Holcim's own carbon tool, the mix had no third-party environmental product declaration (EPD), the warm mix held 10% RAP against the control's 15%, and the report recommends at least five years of monitoring.

    Achieved whenthe mix has a third-party EPD and five years of monitoring show it lasting as long as the control.

    adeptnet.org.uk

    Claimed by

    an evaluation for North Lanarkshire Council under Live Labs 2, approved March 2026

  2. Fuel savings, metered in Alabama

    Researchers led by Mohammad Sadeghi metered burner fuel on two Alabama projects. In one, small temperature cuts made no significant difference to fuel use; in the other, a 22 °C cut saved about 8% of burner fuel and a 36 °C cut about 19%. They conclude that warm mix additives can cut burner fuel substantially while keeping acceptable performance if mix designs are adjusted to control rutting.

    Achieved whenthe work is published after peer review and the savings are repeated at plants in other states.

    engrxiv.org

    Claimed by

    Sadeghi, Hartzog, Bairgi, Gatiganti, Dylla, Tran and Bowers, in a preprint posted January 2026

Open

  1. 01

    Fuel saved per degree

    An open dataset of every published plant trial that metered burner fuel for the same mix made hot and made warm, with the temperature drop, stone moisture, plant type, fuel and RAP share for each, and a simple model of fuel saved per degree of cooling, tested on trials held back from fitting.

    The brief
    Credit · unclaimed
  2. 02

    The real temperature drop

    A public measure of how much cooler warm mix is actually made, from plant or delivery temperatures already recorded for public road jobs, set beside hot mix from the same plants.

    The brief
    Credit · unclaimed

Open 01 · the brief

Fuel saved per degree

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open dataset of every published plant trial that metered burner fuel for the same mix made hot and made warm, with the temperature drop, stone moisture, plant type, fuel and RAP share for each, and a simple model of fuel saved per degree of cooling, tested on trials held back from fitting.

Why it is still open

The 2007 US scan team reported burner fuel savings of 20 to 35% and noted that "no specific study was referenced" for them. Measured results are scattered and differ: the 2026 Alabama preprint metered two projects and cites a 2014 study by Randy West and colleagues that found an average saving of 22.1% across six plants for an average drop of 26.7 °C, more than twice the saving per degree that the preprint's own 22 °C trial gave (this file's arithmetic: about 0.8% against 0.4% per °C). NAPA published a thermodynamic method for estimating a mix's burner fuel from its production temperature in June 2026, a calculation rather than a set of pooled measurements, and the 2026 Live Labs 2 evaluation used stand-in values where measured plant data were incomplete.

international.fhwa.dot.govengrxiv.orggo.asphaltpavement.orgadeptnet.org.uk

Built with what exists

Trial reports from NCHRP, FHWA, NCAT and European road agencies; WebPlotDigitizer to read values off charts; an AI model that reads PDF tables, such as Claude or Gemini; Python with statsmodels.

  1. First step

    List every plant trial with metered fuel cited in the Alabama preprint and the FHWA scan report, and enter the first ten into a shared spreadsheet.

  2. Done looks like

    At least 40 paired hot and warm comparisons from at least five countries, each linked to its source, published with fuel saved per °C and its 95% confidence interval, and predictions for five held-out trials posted before they are compared with the measured savings.

Open 02 · the brief

The real temperature drop

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public measure of how much cooler warm mix is actually made, from plant or delivery temperatures already recorded for public road jobs, set beside hot mix from the same plants.

Why it is still open

The national figures rest on producers' answers to a survey that asks for their "best estimate" of the share of warm mix tonnage made at reduced temperature; those answers put the average drop across all US mix at 4.8 °F (2.7 °C) in 2024. EAPA notes that US warm mix figures up to 2020 also counted mix made at hot mix temperatures.

rosap.ntl.bts.goveapa.org

Built with what exists

Public-records requests to state transportation agencies for plant reports and load tickets that record mix temperature; an AI model that reads scanned tickets, such as Claude; Python with pandas.

  1. First step

    Ask one state transportation agency which of its records hold the plant discharge or delivery temperature of each load, and request one season of them.

  2. Done looks like

    At least 1,000 production days from at least five states, each labelled warm or hot from the approved mix design, published with the distribution of temperature drop by warm mix technology beside the survey's figures.