Industries / Energy, water and waste / Water and wastewater
Reuse and desalination
Making new drinking water from treated sewage (water reuse) and from seawater or salty groundwater (desalination), mostly with reverse osmosis, which pushes water at high pressure through a membrane that holds back salt and contaminants.
7
Milestones achieved, from 1960 to 2024.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1960
A membrane that passes water
Sidney Loeb and Srinivasa Sourirajan cast a cellulose acetate membrane with a thin, dense skin over a porous body, which let water through fast enough under pressure while stopping salt and made reverse osmosis practical. They filed the patent on 29 November 1960, and it was granted in 1964 (US 3,133,132, assigned to the University of California).
Credit
Sidney Loeb and Srinivasa Sourirajan
1968
Sewage to tap in Windhoek
Windhoek, Namibia, began purifying treated sewage and blending it straight into the city's drinking supply, with no river or aquifer in between, which is called direct potable reuse; EPA's 2017 Potable Reuse Compendium calls it the first such project in the world. An EPA-cited study of 1976 to 1983 found diarrheal disease marginally lower among residents drinking the reclaimed water than among those on conventional supply.
LessonA severe shortage with no workable alternative carried the decision.
Credit
City of Windhoek; South Africa's Council for Scientific and Industrial Research
1981
The thin-film membrane
John Cadotte formed a very thin layer of aromatic polyamide in place on a porous support, through a reaction where water meets an oily solvent (interfacial polymerization). He filed in February 1979, and the patent was granted on 7 July 1981 (US 4,277,344).
Credit
John E. Cadotte, FilmTec Corporation
2003
Singapore launches NEWater
Singapore opened its first two NEWater plants, at Bedok and Kranji, in 2003, after a 10,000 cubic meter a day demonstration plant in 2000. NEWater is treated sewage cleaned by membrane filtration, reverse osmosis and ultraviolet light; most goes by separate pipes to factories and cooling systems, and in dry spells some is added to reservoirs and treated again before it reaches taps.
LessonPUB introduced it in public when 60,000 people drank it at the National Day celebration on 9 August 2002.
Credit
PUB, Singapore's national water agency
2013
Seawater at national scale
Israel's Sorek seawater reverse osmosis plant was commissioned in 2013, with large 16-inch membrane elements in a vertical arrangement, under a 25-year build-operate-transfer contract. IDE gives its capacity as 640,000 cubic meters a day and calls it the largest plant of its kind.
Credit
IDE Technologies
2013
Texas tries direct reuse
Big Spring's 1.8 million gallon a day plant has purified treated sewage with microfiltration, reverse osmosis, and UV light with hydrogen peroxide since 2013, feeding it into the raw supply ahead of normal treatment; an independent evaluation for the Texas Water Development Board found the water of "very high quality". Wichita Falls ran an emergency direct reuse plant from 9 July 2014 to 21 July 2015, supplying up to half of daily demand until heavy rain returned.
LessonDirect reuse can serve as a drought measure that is built in 27 months and switched off when rain returns.
Credit
Colorado River Municipal Water District; City of Wichita Falls; the Texas Commission on Environmental Quality, which approved both case by case
2024
California writes direct reuse rules
California's State Water Resources Control Board adopted statewide rules for direct potable reuse on 19 December 2023, in effect from 1 October 2024. They set required levels of pathogen removal from a risk assessment of the microbes in sewage.
Credit
California State Water Resources Control Board
Watch for
Desalination on the seabed
Flocean says its subsea reverse osmosis system, which places membranes deep underwater where the water's own pressure does part of the work, uses 40% to 50% less energy than conventional plants, and it is building what Scientific American calls the first large-scale subsea plant, off Norway. Nidal Hilal of NYU Abu Dhabi told the magazine the technology "has yet to be proven at large scale".
Achieved whenan outside party measures a commercial subsea plant's energy use over months of operation and publishes it.
Claimed by
Flocean, August 2025
Phoenix plans sewage to tap
Phoenix is rebuilding its Cave Creek plant, at about $350 million, to purify sewage directly into drinking water; the work is about half done, and the city aims to send purified water into its pipes in early 2029.
Achieved whenArizona regulators permit it and purified water enters the city's distribution system.
Claimed by
City of Phoenix officials, March 2026
Open
01
One yardstick for desalination energy
An open calculator that puts desalination energy claims on one basis (the same plant boundary from intake to delivery, seawater salinity and temperature, and the share of seawater turned into product), then a table of published claims recast on that basis.
The briefCredit · unclaimed02
A robot that probes vessels
A device that probes a reverse osmosis pressure vessel by itself: it feeds a thin tube along the vessel's permeate channel, the central tube that collects clean water, reads conductivity at each joint between membrane elements, and flags the joint where salt leaks through.
The briefCredit · unclaimed
Open 01 · the brief
One yardstick for desalination energy
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open calculator that puts desalination energy claims on one basis (the same plant boundary from intake to delivery, seawater salinity and temperature, and the share of seawater turned into product), then a table of published claims recast on that basis.
Why it is still open
A 2020 review splits a seawater reverse osmosis plant into five stages, from intake to brine disposal, and puts its energy use between 3 and 6.7 kWh per cubic meter depending on feed conditions, product requirements and plant efficiency. Guinness lists 1.794 kWh per cubic meter as a record without saying how it was measured, and Flocean's claimed 40% to 50% saving has no outside check. A search found no published standard for reporting the figure.
frontiersin.orgguinnessworldrecords.comscientificamerican.com
Built with what exists
Python; the review's five-stage plant boundary; operators' reports and published papers; a reviewer pass that checks each number against its source for a person to confirm (see the Note "Seven more flagged").
First step
Collect 25 claims with their stated salinity, temperature, recovery and plant boundary, and mark which of those each one leaves out.
Done looks like
Twenty-five published energy claims recast on the common basis, each with its assumptions shown and its missing facts marked, and the calculator released under an open license.
Open 02 · the brief
A robot that probes vessels
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A device that probes a reverse osmosis pressure vessel by itself: it feeds a thin tube along the vessel's permeate channel, the central tube that collects clean water, reads conductivity at each joint between membrane elements, and flags the joint where salt leaks through.
Why it is still open
Hydranautics' bulletin describes probing as hand work: an operator pushes tubing into the running vessel, waits a minute, reads conductivity, pulls the tube out 20 inches and repeats, and a sudden rise at a joint usually means a leaking O-ring. A search found the hand procedure in several makers' guides and no automated probing device.
Built with what exists
A stepper-motor tube feeder with 3D-printed parts; an inline conductivity sensor; a Raspberry Pi; a short script or small model that flags steps in the readings; a bench reverse osmosis unit with one pressure vessel, run on salted tap water at low pressure.
First step
Build the tube feeder and test it on an empty vessel shell to check that it stops at each joint.
Done looks like
Twenty runs on the bench vessel, each with one O-ring nicked at random by a helper, the number of runs in which the device names the faulty joint, and its time per vessel against hand probing, all published.