Industries / Retail, hospitality and personal services / Retail and e-commerce / Vending
Payments
This work covers how buyers pay a machine and how the machine checks that payment: coins, notes, cards, phones and transit cards, the parts inside the machine that accept them, and the fraud each one invites.
5
Milestones achieved, from 1995 to 2022.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1995
One standard for payment devices
The Multi-Drop Bus (MDB) sets the wiring and messages between a vending machine's controller and the devices that take payment: coin changers, bill validators and card readers. The US National Automatic Merchandising Association (NAMA) published it as an open standard in 1995, and with the European Vending Association (EVA) released the international MDB/ICP version 1.0 on 14 October 1998. Its section 7 covers cashless devices; version 4.3, published in 2019, changed only that section.
Credit
NAMA, EVA and the European Vending Machine Manufacturers Association
1998
Drinks charged to phones
A Finnish pilot let people "Dial-a-Coke": call a number from a mobile phone at a vending machine and pay on the monthly phone bill, as a paper at the 1998 USENIX workshop on electronic commerce described. In April 1999 The Irish Times described a Pepsi machine at Helsinki airport that took no cash or cards: a call released a can and put the Finnish equivalent of 50p on the caller's phone bill. A 2011 post on the payments blog chyp.com says that, to its author's knowledge, the first mobile payment ever was made in Helsinki in 1997, for a Coca-Cola.
Credit
Coca-Cola and Finnish mobile operators; the sources read do not name the operator
2000
A coin remade against slugs
A slug is a fake or foreign coin passed off as a real one. Japan's 500 yen coin was the same size as South Korea's 500 won coin, worth far less, and won coins were shaved to the yen coin's weight and fed into vending machines, often followed by a press of the return lever to get real coins back. Police in Nagano found 773 altered won coins in 60 machines in October 1997, and 657,000 altered coins, most of them won coins, from January to October 1999. On 3 December 1999 the Finance Ministry announced a 500 yen coin of a new alloy, issued in 2000, whose electrical conductivity lets machines reject substitutes, and asked for more than 5 million machines to be adjusted at about ¥20,000 each. In November 2025 the Korea Times reported won coins again being passed as 500 yen, this time at shop counters, restaurants and public baths, where staff check coins by eye.
LessonA machine that checks only size and weight can be fooled by a cheaper foreign coin; the fix was to change the coin's metal so that machines could test it.
Credit
Japan's Ministry of Finance
2017
A new pound coin's bill
The UK replaced its round £1 coin, up to 3 in every 100 of which were fake, with a 12-sided coin from March 2017, and both were legal tender for six months. The Automatic Vending Association (AVA), the UK trade body, put the cost to the trade at about £32 million for some 500,000 machines, and The Guardian reported that about 40% of vending and other cash-taking machines would need their coin mechanism removed and sent away for upgrading. The AVA says that at its request the Royal Mint gave the coin soft edges so that it rolls better in machines; the change to new 5p and 10p coins in 2011 had cost the trade £28.9 million.
LessonEvery change of coin or note is a bill for every machine owner, and bringing the machine trade in early changed the coin's design.
Credit
HM Treasury and the Royal Mint; the AVA
2022
Station machines stop taking cash
At the acure drink machines in JR East's stations, more than 70% of purchases across eastern Japan were cashless, mostly with transit IC cards such as Suica (prepaid contactless cards also used for train fares), and more than 80% at Tamachi and Yoyogi stations on Tokyo's Yamanote Line. From 20 October 2022 the machines at those two stations took no cash, and about 150 cashless-only machines were planned by March 2023, The company said that dropping cash ends cash collection and some breakdown calls, and that cashless sales data improve its choice of sites and products. The machines also take Alipay and WeChat Pay QR codes.
Credit
JR East Cross Station Water Business Company
Watch for
Cashless passes three in four
Cantaloupe, a US company that makes card readers and software for vending machines, says cashless payments made up 78% of vending sales in 2025 on the devices connected to its service in the United States and Canada, up from 73% in 2024, and that contactless taps made up 85% of cashless vending sales. Its data come from 581,202 devices connected to Cantaloupe's service, machines fitted with its equipment rather than a sample of all machines.
Achieved whenan independent count that includes machines without card readers finds that most vending sales are cashless.
Claimed by
Cantaloupe, July 2026
Open
01
Count how machines take payment
An open census of how food and drink vending machines take payment in at least five cities on three continents: coins, notes, cards, contactless, phone wallets, transit cards and QR codes, whether the machine is cash-only or card-only, and any difference between the cash and card price, each with a dated photo and entered in OpenStreetMap.
The briefCredit · unclaimed02
Test card readers against MDB
An open test rig that plays the part of a vending machine's controller on the MDB bus, runs every cashless-device command sequence in section 7 of MDB 4.3 against commercial card readers, and publishes a pass or fail table for each reader model and firmware version.
The briefCredit · unclaimed
Open 01 · the brief
Count how machines take payment
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open census of how food and drink vending machines take payment in at least five cities on three continents: coins, notes, cards, contactless, phone wallets, transit cards and QR codes, whether the machine is cash-only or card-only, and any difference between the cash and card price, each with a dated photo and entered in OpenStreetMap.
Why it is still open
The best-known figure, Cantaloupe's 78% cashless share, covers only machines connected to its own service. OpenStreetMap held 376,052 vending machine objects worldwide on 19 November 2026, many of them parking-ticket and dog-bag dispensers, and only about 60,000 say whether they take coins and 12,900 whether they take contactless cards.
Built with what exists
A phone camera; OpenStreetMap's editors and the Overpass API; an AI vision model to read payment logos and price labels from each photo, with a person checking a sample; Python with pandas.
First step
Photograph and tag every food and drink machine on one campus or along one transit line.
Done looks like
At least 2,000 food and drink machines in at least five cities photographed and tagged; for each city, the share of machines taking each kind of payment and the share with a card price above the cash price, with 95% confidence intervals; photos under an open license; and two people agreeing on at least 95 of 100 sampled photos.
Open 02 · the brief
Test card readers against MDB
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open test rig that plays the part of a vending machine's controller on the MDB bus, runs every cashless-device command sequence in section 7 of MDB 4.3 against commercial card readers, and publishes a pass or fail table for each reader model and firmware version.
Why it is still open
Open code exists for the reader side, such as MateDealer on an Arduino and the ESP32-based mdb-esp32-cashless, and bench testers such as S.E.M.'s CTX MDB Tester PRO 2 can stand in for the machine's controller to check one device in a workshop, but no published results of commercial readers tested against the standard were found. NAMA's 2019 announcement of version 4.3 offers the standard as a PDF and mentions no test or certification program.
Built with what exists
The MDB 4.3 specification from NAMA; an ESP32 or Raspberry Pi with an MDB interface; MateDealer and mdb-esp32-cashless as reference code; a bench power supply for the bus's nominal 34 V DC; a logic analyzer with the open sigrok PulseView software to record each exchange; secondhand card readers run against their payment processors' test accounts, so no real money moves.
First step
Write the controller side of the RESET and SETUP exchange on an ESP32 and record it against one secondhand reader.
Done looks like
A test suite that covers every section 7 command; results for at least five reader models from at least three makers, each failure saved with its bus recording; and a second lab rerunning two readers and getting the same results.