Industries / Transport and vehicles / Trucking and freight
Paperwork and payment
Every load travels with documents that show what was handed over, to whom and on what terms, such as a bill of lading in the US, a consignment note in Europe and a proof of delivery at the end, and the carrier is paid only after those papers reach the payer.
7
Milestones achieved, from 1956 to 2022.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1956
One contract across borders
The CMR Convention, signed in Geneva on May 19, 1956, and in force since July 2, 1961, set common rules for contracts to carry goods by road between countries, including the consignment note that goes with each load. It has 58 parties.
Credit
the United Nations, which holds the treaty
1956
A bank pays freight bills
Cass, founded in 1906 as a bank, started "The Freight Payment Plan" in 1956 to pay carriers' bills on behalf of shippers. Cass says it now handles 51 million invoices and $94 billion in payments a year.
Credit
Cass Information Systems
1968
Freight starts paperless messages
The US Transportation Data Coordinating Committee formed in 1968 to bring four industry formats for sending shipping documents from computer to computer into line. This electronic data interchange (EDI) began in rail and road transport in the 1960s, and the ANSI X12 standards later extended and replaced the committee's formats.
Credit
Transportation Data Coordinating Committee; account by Roger Clarke of the Australian National University
2017
A paperless border crossing
An addition to the CMR treaty allowing an electronic consignment note, called e-CMR, was agreed in 2008 and took effect on June 5, 2011. On January 19, 2017, a truck of the Spanish carrier Primafrio carried oranges about 1,300 km from Huelva, Spain, to Perpignan, France, with an e-CMR; IRU called it "the first ever border crossing to use electronic consignment notes." By November 2026 the e-CMR protocol had 42 parties.
LessonA law that allows digital papers does not by itself bring them into use; the first cross-border trip came almost six years after the protocol took effect.
Credit
IRU, the Spanish carriers' association ASTIC and the French federation FNTR, using the TransFollow platform
2018
India's electronic way bill
From April 1, 2018, goods worth 50,000 rupees or more moving between Indian states needed an electronic "e-way bill," made on a government portal under the GST sales tax. Maritime Gateway reported 171,503 e-way bills made in the first 17 hours.
Credit
GST Council; GST Network with the National Informatics Centre
2020
China makes platforms file waybills
Rules from China's Ministry of Transport and State Taxation Administration took effect on January 1, 2020, for "network freight" platforms, which sign the haulage contract as the carrier and hire a trucker to move the load. These platforms must upload waybill data to a provincial monitoring system and keep order records, payments and live GPS tracks for at least three years.
Credit
Ministry of Transport; State Taxation Administration
2022
Standard electronic bills of lading
The Digital LTL Council of the National Motor Freight Traffic Association (NMFTA) published one standard for electronic bills of lading (eBOL) for less-than-truckload freight, in which many small shipments share one truck. Twenty-nine companies, including C.H. Robinson, Old Dominion, Saia and XPO, pledged to use it; in June 2023 FreightWaves reported that many of the largest carriers of such freight were using it, and that C.H. Robinson used eBOLs with most carriers on its platform. Version 2.1 followed in March 2024.
Credit
NMFTA Digital LTL Council
Watch for
EU authorities accept digital papers
Under the EU's electronic freight transport information (eFTI) Regulation 2020/1056, authorities in every EU country must accept freight information shown electronically from certified platforms from July 9, 2027. The rules for those platforms were adopted on November 6, 2025.
Achieved whencertified eFTI platforms are running and roadside officers in member states routinely accept electronic data in place of paper.
Claimed by
European Commission, November 2025
Open
01
Map US e-bills to eFTI
An open, field-by-field mapping between NMFTA's eBOL format, the EU's eFTI common data set and the e-CMR, with a checker and made-up sample files, so one shipment record can be tested against all three.
The briefCredit · unclaimed02
Photographed freight papers test set
A public set of made-up but realistic bills of lading, CMR notes and proofs of delivery that have been printed, stamped, signed, written on by hand and photographed with phones, each with its correct field values, so anyone can measure how well document-reading software pulls out the data.
The briefCredit · unclaimed
Open 01 · the brief
Map US e-bills to eFTI
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open, field-by-field mapping between NMFTA's eBOL format, the EU's eFTI common data set and the e-CMR, with a checker and made-up sample files, so one shipment record can be tested against all three.
Why it is still open
EU authorities must accept eFTI data from July 2027, and the US and EU formats were built separately. The Open Logistics Foundation has published open-source e-CMR tools and invited shared work on eFTI, but this research found no mapping to the US eBOL.
Built with what exists
NMFTA's eBOL API standard, version 2.1, which NMFTA offers for download; the eFTI common data set in EU law; the Open Logistics Foundation's e-CMR toolbox; JSON Schema and Python; an AI model to draft field matches for a person to check (see the Note "Seven more flagged").
First step
Download the eBOL 2.1 standard and the eFTI common data set, and match the shipper, receiver and goods fields by hand.
Done looks like
Every field in all three formats marked as matched, partly matched or missing, published with at least 50 sample shipments that pass the checker in all three forms.
Open 02 · the brief
Photographed freight papers test set
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of made-up but realistic bills of lading, CMR notes and proofs of delivery that have been printed, stamped, signed, written on by hand and photographed with phones, each with its correct field values, so anyone can measure how well document-reading software pulls out the data.
Why it is still open
Much freight paperwork is still handled by people: C.H. Robinson said in April 2025 that emailed load orders used to wait up to four hours for a person to process them. The one public bill-of-lading test set found, bol-bench (2026), has 25 one-page documents made by computer, some degraded to look scanned or faxed, and none photographed or handwritten.
Built with what exists
bol-bench's field list as a starting point; printers, rubber stamps and pens; several phones; an open labeling tool; small open models that can be fine-tuned on one graphics chip (see the Note "One GPU to fine-tune"); a second model that flags doubtful labels for a person to check (see the Note "Seven more flagged").
First step
Fill in 20 bill-of-lading forms by hand, stamp and photograph them under different light, and score one free model on them.
Done looks like
At least 1,000 photographed documents of at least three types, released under an open license with exact field values, and a published table of field-level accuracy for at least three extraction tools.