Industries / Transport and vehicles / Trucking and freight
Fleet maintenance
This work keeps trucks and trailers fit for the road: daily and yearly inspections, reading the faults a truck reports about itself, and fixing brakes, tires and electronics before they fail.
6
Milestones achieved, from 1988 to 2024.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1988
Shared fault codes for trucks
At an SAE meeting in Indianapolis on November 7, 1988, Ryder, Cummins, Caterpillar, Freightliner and Microflex unveiled a plan for uniform truck electronic service and diagnostic systems. It became the SAE standards J1708 and J1587, which let one general scan tool read fault codes from parts made by different companies; the faster J1939 network later took their place.
Credit
Ryder, Cummins, Caterpillar, Freightliner and Microflex; SAE International
1988
Yearly inspection for every truck
A Federal Highway Administration rule of December 7, 1988, required every truck in US interstate service to pass an inspection at least once a year, with proof carried on the vehicle; it still stands as 49 CFR 396.17.
LessonYearly checks have not ended failures on the road; in CVSA's 2025 International Roadcheck, inspectors took 10,148 vehicles out of service in three days, and brakes made up 41.1% and tires 21.4% of the vehicle violations that did so.
Credit
US Congress (Motor Carrier Safety Act of 1984); the Federal Highway Administration, later FMCSA
2011
Trucks report faults remotely
Daimler Trucks North America's Detroit Virtual Technician, built with Zonar Systems, began in 2011 to send engine and exhaust-cleaning fault codes over a cellular link and tell fleets within two minutes how serious a fault is. Volvo Trucks launched its Remote Diagnostics service in North America in May 2012 after a field test with 15 fleets running more than 1,300 trucks. By June 2016 Detroit had installed its 200,000th unit.
Credit
Daimler Trucks North America with Zonar Systems; Volvo Trucks North America
2013
Self-checks on US heavy engines
A 2009 US Environmental Protection Agency rule required onboard diagnostics (OBD), built-in monitoring that watches the exhaust-cleaning parts and warns the driver when they need repair, on one engine family per maker from 2010 and on all heavy-duty engine families from model year 2013. It fixed the data language (SAE J1939 or ISO 15765-4) and required makers to give independent repair shops the information needed to fix these systems.
Credit
US Environmental Protection Agency
2018
EU-wide truck test rules
From May 20, 2018, EU countries must test trucks and heavy trailers one year after first registration and every year after, send results to the authorities electronically, and check electronic safety systems such as antilock brakes, in some cases through the vehicle's electronic interface. A companion law sets a target of roadside technical checks equal to at least 5% of registered heavy vehicles each year and points them at companies with worse records.
Credit
European Parliament and Council (Directives 2014/45/EU and 2014/47/EU)
2024
EU trucks get tire alarms
The EU General Safety Regulation requires a tire pressure monitoring system, which warns the driver when a tire loses pressure, on all newly registered heavy vehicles from July 7, 2024, and on new types from July 6, 2022.
Credit
European Parliament and Council (Regulation 2019/2144)
Watch for
Updated EU truck test rules
The European Commission proposed in April 2025 to update the 2014 test laws, adding checks of driver-assist systems, exhaust tests for nitrogen oxides and particles at roadside checks of heavy trucks, roadside remote sensing of exhaust and noise, and electronic test certificates. In the EU Council's December 2025 compromise, remote sensing became voluntary, and many of the 62 proposed electronic-safety test items were merged, made voluntary or deleted, because such tests depend on makers sharing data with test centers.
Achieved whenthe amended law is adopted and member states apply it.
Claimed by
European Commission, April 2025; Council of the EU, December 2025
Truck right to repair
In May 2026 the US House Energy and Commerce Committee voted 48 to 1 for the Motor Vehicle Modernization Act of 2026 (H.R. 7389). It would give legal force, with Federal Trade Commission enforcement, to a voluntary 2015 agreement between truck makers and independent repairers on access to repair information and tools. The committee left out a broader bill's requirement to open telematics data, the information vehicles send wirelessly, to independent shops.
Achieved whenthe bill becomes law and the FTC begins enforcing it.
Claimed by
House Energy and Commerce Committee, May 2026
Drive-through scanners for trucks
UVeye says its camera gates scan a heavy truck's tires, underbody and exterior in seconds as it drives through, in an automated 17-point inspection, and in June 2026 it opened a system with Mesilla Valley Transportation in El Paso, Texas. No outside test of its accuracy was found.
Achieved whenan independent party compares the scanner's findings with those of qualified inspectors on the same trucks and publishes the result.
Claimed by
UVeye, June 2026
Open
01
Blind test of truck scanners
A test plan, and a pilot at a fleet yard, in which trucks pass through a drive-through scanner and are also inspected by the fleet's qualified inspectors, without either seeing the other's results. Publish detection and false-alarm rates by type of defect, such as tread depth, cuts, leaks and missing parts.
The briefCredit · unclaimed02
Find air leaks by sound
A tool that hears and locates leaks in a truck's air brake lines, using a low-cost ultrasonic microphone, tested on a bench rig of real brake hoses, gladhands (the couplings between tractor and trailer) and a brake chamber fed by shop air, with holes of known size made on purpose. Keep the pressure below the parts' rating, wear eye protection, and never test on a truck in service.
The briefCredit · unclaimed
Open 01 · the brief
Blind test of truck scanners
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A test plan, and a pilot at a fleet yard, in which trucks pass through a drive-through scanner and are also inspected by the fleet's qualified inspectors, without either seeing the other's results. Publish detection and false-alarm rates by type of defect, such as tread depth, cuts, leaks and missing parts.
Why it is still open
The only accuracy figures for these systems come from the seller, and a search for an independent evaluation found none.
Built with what exists
A fleet that already has a scanner installed; the minimum inspection standards in Appendix A of 49 CFR Part 396 as the checklist; photos of each finding; a shared spreadsheet.
First step
Write the test plan and send it to two fleets that have announced drive-through scanners.
Done looks like
At least 200 truck passes compared item by item, with a published table of the defects each method found that the other missed.
Open 02 · the brief
Find air leaks by sound
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A tool that hears and locates leaks in a truck's air brake lines, using a low-cost ultrasonic microphone, tested on a bench rig of real brake hoses, gladhands (the couplings between tractor and trailer) and a brake chamber fed by shop air, with holes of known size made on purpose. Keep the pressure below the parts' rating, wear eye protection, and never test on a truck in service.
Why it is still open
Brakes made up 41.1% of the vehicle violations that took trucks off the road in the 2025 Roadcheck. Southwest Research Institute built a prototype in 2022 that finds compressed-air leaks on trains with a 64-microphone acoustic camera and machine learning, catching about 11 in 13 leaks, but this research found no such tool tested on truck air brakes.
Built with what exists
Used air brake hoses, gladhands and a brake chamber from a parts supplier; a shop compressor with a pressure regulator; a USB ultrasonic microphone, since phone microphones do not record the 30 to 45 kHz band where Southwest Research Institute found leaks stand out; an open audio classifier in Python.
First step
Build a rig with one hose, one gladhand and a regulator set well below the parts' rated pressure, and record one known leak with an ultrasonic microphone.
Done looks like
At least 200 recorded trials across three leak sizes and several background noise levels, with a published rate of leaks found and false alarms, and the recordings released.