BRENNEN

Industries / Retail, hospitality and personal services / Hospitality and tourism / Wedding and events / Trade show displays

Printed graphics

This work prints the images, logos and words that cover a stand and fits them to its frames.

4

Milestones achieved, from 1992 to 2016.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1992

    Inkjet printers go wide

    Iris inkjet printers made large photographic, fine-art and proof prints in the United States from the late 1980s. In 1992 Encad developed the NovaJet, "probably the first wide-format inkjet with a modern configuration of drop-on-demand heads", which fire a drop only where one is needed, by the account of the trade writer Simon Eccles; it was very slow and cost about £30,000. Inkjet then took indoor sign and display work from screen, offset and electrostatic printing.

    imagereportsmag.co.ukhistory.siggraph.org

    Credit

    Encad; Iris

  2. 2004

    Fabric pushed into grooves

    A silicone edge graphic (SEG) is printed fabric with a flat silicone strip sewn around its edge, which is pushed into a groove in an aluminum frame. Mike Horsten, founder of TexSmart, wrote in 2020 that he made his first SEG frame "more than 20 years ago", that the retailers Mexx and H&M were the first to use the method in their stores, and that in 2004 he was producing 2,400 banners a week for Mexx.

    bigpicturemag.comdigitaloutput.net

    Credit

    Mike Horsten; Mexx; H&M

  3. 2008

    Ink without the fumes

    The first solvent inks for durable outdoor wide-format prints were "hazardous to operators, so needed forced ventilation during printing and remained unpleasantly smelly afterwards", Eccles writes. In 2008 HP announced Latex, an outdoor-durable ink with a water base.

    LessonA print that lasts is not enough if its ink harms the people running the printer.

    imagereportsmag.co.uk

    Credit

    HP

  4. 2016

    Fabric becomes the default

    Sign Media Canada reported in 2016 that exhibitors were saving on shipping and assembly with booths that combine fabric with framing systems, that fabric resists wear better than vinyl graphics, and that fabric graphics can be folded with bubble wrap between them. Classic Exhibits, a US exhibit maker, puts printed fabric at "80-90% of all graphics on the show floor" and about half the price of a photographic Lambda or inkjet print of the same size; before dye sublimation, which uses heat to bond dye into polyester, "the only real way to print on fabric was silk screen".

    signmedia.caclassicexhibits.comtextiles.org

    Credit

    dye-sublimation printer makers such as Epson, which entered the market in 2013 with 44-inch and 64-inch transfer printers sold for uses including soft signage

Watch for

  1. Faster fabric printing

    EFI said its 3.4 m VUTEk FabriVU 340 i8 dye-sublimation printer, first shown at the FESPA show in Barcelona in May 2026, prints straight onto polyester and fixes the dye in the same pass, at up to 375 m² an hour, for work that includes SEG wall graphics.

    Achieved whena print shop or test lab publishes measured output near that speed on SEG fabric.

    piworld.com

    Claimed by

    EFI, May 2026

Open

  1. 01

    Robot fits fabric graphics

    A pair of robot arms that presses the silicone edge of a printed fabric graphic into the groove of an aluminum frame, corners first and then the sides, until the fabric is taut.

    The brief
    Credit · unclaimed
  2. 02

    Fabric back into fabric

    A take-back trial for used SEG graphics: collect them from exhibit houses, cut off the silicone edges, weigh what is left, and send the polyester to a textile recycler that makes new fiber, publishing the yield and the cost per kilogram.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot fits fabric graphics

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A pair of robot arms that presses the silicone edge of a printed fabric graphic into the groove of an aluminum frame, corners first and then the sides, until the fabric is taut.

Why it is still open

Installation guides describe hand work: insert the edge into the groove at each corner, then work from the center of each side. The newest tooling found is a handled tool for the same job by Eric Rocklitz, in a US patent dated 4 March 2025. This research found no robot attempt.

smartpress.comipiq.io

Built with what exists

two low-cost open-source arms such as the SO-101 for small frames, or two collaborative arms for full-size ones; LeRobot; a vision-language-action model such as GR00T or Praxis-1. The Notes "Five demonstrations per task" and "Open robot model weights" cover these.

  1. First step

    Film an installer fitting the same graphic twenty times with a wrist camera and release the recordings as a LeRobot dataset.

  2. Done looks like

    Twenty filmed attempts on a 1 m by 2 m frame, with a published tally of graphics seated all round with no visible wrinkle, judged from photos by an installer, and the time per graphic against a person.

Open 02 · the brief

Fabric back into fabric

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A take-back trial for used SEG graphics: collect them from exhibit houses, cut off the silicone edges, weigh what is left, and send the polyester to a textile recycler that makes new fiber, publishing the yield and the cost per kilogram.

Why it is still open

SuperGraphics, a US large-format printing company, says "there are no closed-loop recycling options available for large-format recyclable plastics in the market today", and sends its own waste to be made into fuel.

supergraphics.com

Built with what exists

a guillotine or band knife to remove the edges; platform scales; a handheld near-infrared scanner of the kind recyclers use to identify plastics.

  1. First step

    Ask three exhibit houses to set aside one month of discarded SEG graphics and weigh the edges and the fabric separately.

  2. Done looks like

    500 kg of used graphics processed, with the published share that became new fiber, the contamination found and the cost per kilogram against landfill.