BRENNEN

Industries / Retail, hospitality and personal services / Hospitality and tourism / Theme parks

Ride safety and inspection

Ride safety and inspection covers the rules rides are built and run to, the checks made before each season and each day, and the investigations that follow when something goes wrong.

6

Milestones achieved, from 1978 to 2022.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1978

    A committee for ride rules

    ASTM International, a body that writes voluntary consensus standards, formed Committee F24 on Amusement Rides and Devices in 1978. It now has 1,112 members from around the world, meets twice a year, and is responsible for 30 standards, by ASTM's count. About 35 US states refer to ASTM's ride standards in their own rules, according to a 2022 article in The Regulatory Review.

    astm.orgtheregreview.org

    Credit

    ASTM International

  2. 1981

    States left to inspect

    In 1981 Congress exempted amusement rides "permanently fixed to a site" from the oversight of the US Consumer Product Safety Commission (CPSC), so rides in fixed parks are regulated by the states, if at all. Critics call the change the "roller coaster loophole," and Senator Ed Markey has introduced bills to reverse it, among them H.R. 2500 in 2005. The International Association of Amusement Parks and Attractions (IAAPA) counts 44 states that regulate rides, and The Regulatory Review names six with no state oversight: Alabama, Mississippi, Montana, Nevada, Wyoming and Utah.

    theregreview.orgmarkey.senate.gov

    Credit

    US Congress

  3. 2015

    Crash after a manual override

    On 2 June 2015 a carriage on the Smiler roller coaster at Alton Towers in England ran into a stationary carriage on the same track, and 16 people were hurt, several seriously. The UK Health and Safety Executive (HSE) found no fault with the track, cars or control system; engineers had overridden the control system without fully understanding whether that was safe, and the root cause was "a lack of detailed, robust arrangements for making safety critical decisions." On 27 September 2016 Stafford Crown Court fined the operator, Merlin Attractions Operations Ltd, £5 million plus £69,955.40 in costs.

    LessonA control system that stops a ride protects riders only if the people restarting it follow a set procedure for doing so.

    wired-gov.net

    Credit

    Health and Safety Executive

  4. 2015

    A worldwide design standard

    The International Organization for Standardization (ISO) published ISO 17842-1, a standard for the design and manufacture of amusement rides, in 2015. A second edition, approved on 12 September 2023, replaced it, according to the Swedish Standards Institute's catalog. It sets minimum requirements for the safe design, calculation, manufacture and installation of mobile, temporary and permanently installed rides, from roundabouts and Ferris wheels to roller coasters.

    sis.se

    Credit

    ISO

  5. 2017

    Rust inside a beam

    On 26 July 2017 the Fire Ball ride broke apart at the Ohio State Fair. Tyler Jarrell, 18, was killed and seven other people were hurt. KMG, the Dutch maker, said after metallurgical tests that corrosion on the inside of a gondola support beam had "dangerously reduced" the beam's wall thickness over the ride's 18 years, which "finally led to the catastrophic failure of the ride." KMG ordered similar rides shut down worldwide and revised its inspection procedures before they reopened.

    LessonKen Martin, a ride safety consultant, told WOSU that a maker's manual must say plainly when hidden parts, such as the inside of a beam, need inspecting, or owners and inspectors have no way to know.

    wosu.orgnbcnews.com

    Credit

    KMG

  6. 2022

    Sensors adjusted by hand

    On 24 March 2022 Tyre Sampson, 14, fell from his seat on the Orlando FreeFall drop tower in Orlando, Florida, and died. A report by Quest Engineering & Failure Analysis for the Florida Department of Agriculture and Consumer Services found that the sensors on seats one and two had been adjusted by hand, so the harness could open to almost double its normal range while the safety lights still showed the seat as secured. Florida then passed the Tyre Sampson Act, signed on 11 May 2023 and in force from 1 July 2023. It requires a commissioning and certification report on file for new permanent rides, has the department pull rides from service in set cases, and changes the rules on reporting accidents and impounding rides.

    LessonA safety interlock can be defeated by changing what its sensor reads, so the sensor settings themselves need checking.

    attractionsmagazine.comflsenate.gov

    Credit

    Florida Department of Agriculture and Consumer Services; Quest Engineering & Failure Analysis; Florida Legislature

Watch for

  1. Cameras that check restraints

    Disney has applied for a patent on a system in which cameras record each seat during loading and machine-learning models judge whether seat belts, lap bars and shoulder harnesses are fastened and holding the rider. The application says it would catch cases a buckle sensor misses, such as a rider sitting on a buckled belt or a belt pulled out too far, and could alert operators or stop the vehicle from leaving. Today operators check restraints by eye on many rides.

    Achieved whenthe system runs on an operating ride and a regulator or other outside party publishes how often it catches an unsafe restraint and how often it raises a false alarm.

    themeparkinsider.comchipandco.com

    Claimed by

    Disney, patent application published April 2026

Open

  1. 01

    Ride incident record since 2017

    An open, regularly updated table of amusement ride incidents, starting with US states and adding countries whose agencies publish reports, built from state agencies' reports obtained through public-records requests and posted notices. Each record is coded with the fields of Kathryn Woodcock's accident classification guide: operation type (fixed site, mobile or waterpark), ride type, event type, severity and stage of operation.

    The brief
    Credit · unclaimed
  2. 02

    Restraint check test set

    An open, labeled video set of adult volunteers in mock-up ride seats with lap bars, over-the-shoulder harnesses and seat belts, recorded in safe and unsafe states (fully locked, locked with a large gap, belt sat on, belt buckled behind the rider, bar not latched), with a published test of how well current vision models spot each unsafe state.

    The brief
    Credit · unclaimed

Open 01 · the brief

Ride incident record since 2017

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, regularly updated table of amusement ride incidents, starting with US states and adding countries whose agencies publish reports, built from state agencies' reports obtained through public-records requests and posted notices. Each record is coded with the fields of Kathryn Woodcock's accident classification guide: operation type (fixed site, mobile or waterpark), ride type, event type, severity and stage of operation.

Why it is still open

Saferparks, a nonprofit founded in 2000, is no longer active. Its last data set, from a 2017 public-records request, holds about 8,300 reports, and RidesDatabase.org, which now hosts its files, posts nothing newer. Woodcock, of Toronto Metropolitan University, published recaps of media-reported accidents from 2020 to 2022 (66 events in the 2020 summary) and warns that media coverage "cannot be read as the pattern or breakdown of the accidents that occur." Since 1981 no federal agency counts accidents on fixed park rides. Reporters still gather state records one story at a time: a 2026 CNN investigation of Six Flags parks drew on records from California, New Jersey and Texas, among them nearly 300 accident reports California regulators received from Six Flags parks since 2021. A GitHub search ("amusement ride") found only student exercises, and Crossref listed Woodcock's papers but no newer data set.

ridesdatabase.orgscrippsnews.comridesdatabase.orgwoodcock.blog.torontomu.cawoodcock.blog.torontomu.ca

Built with what exists

Public-records requests to state ride agencies; a browser agent such as Browser Use to collect reports that states post online (see the Note "Deleting 80% to start over"); a large language model to pull the fields out of scanned reports, checked by two human coders; the Saferparks 2017 and legacy CSV files as the starting format.

  1. First step

    Download the Saferparks 2017 CSV, list the states that supplied records, and send the same public-records request to three of them for 2018 to 2025.

  2. Done looks like

    Records for 2018 to 2025 from at least ten states, released under an open license in the Saferparks format, with the model's coding agreeing with two human coders on a 300-report sample at a Cohen's kappa (a standard measure of agreement beyond chance) of 0.8 or higher.

Open 02 · the brief

Restraint check test set

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, labeled video set of adult volunteers in mock-up ride seats with lap bars, over-the-shoulder harnesses and seat belts, recorded in safe and unsafe states (fully locked, locked with a large gap, belt sat on, belt buckled behind the rider, bar not latched), with a published test of how well current vision models spot each unsafe state.

Why it is still open

Disney's camera-based restraint check, in a patent application published in April 2026, comes with no public data or test results. Open seat-belt detectors exist for cars, such as a YOLOv5 project on GitHub, but GitHub searches ("seatbelt detection", "seat belt dataset") found none for ride lap bars or harnesses.

themeparkinsider.comgithub.com

Built with what exists

Mock-up seats built from plywood or a salvaged car seat with a hinged lap bar, not a working ride; consumer cameras; a labeling tool such as CVAT or Label Studio; open detection models such as Ultralytics YOLO; and a multimodal model asked fixed-answer questions about each frame (see the Note "A thousand questions, one pass").

  1. First step

    Build one plywood lap-bar seat and record 10 volunteers in five safe and unsafe states each, to settle the list of labels.

  2. Done looks like

    At least 5,000 labeled clips from 30 or more consenting adult volunteers of varied body sizes on three restraint types, released openly, with a baseline model's miss rate on unsafe states and false-alarm rate on safe ones reported for each restraint type and body size.