Industries / Consumer goods / Textiles and apparel
Weaving and knitting
Weaving makes fabric by crossing two sets of threads at right angles on a loom; knitting makes it by pulling loops of yarn through other loops.
5
Milestones achieved, from 1589 to 1995.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1589
A frame that knits
William Lee of Calverton, near Nottingham, had a knitting frame working by 1589. Its rows of hooked needles knitted a whole row of loops at once, where a hand knitter made one stitch at a time. Belper North Mill museum says one English firm, Brettle's, still used knitting frames until the 1930s.
Credit
William Lee
1733
The flying shuttle
John Kay patented a shuttle that one weaver could send across the loom with a flick of the wrist. Weavers could then make wider cloth, and make it faster.
Credit
John Kay
1804
Patterns stored on cards
Joseph Marie Jacquard completed a loom that read its pattern from a chain of punched cards; needles passing through the holes decided which threads lifted. The IEEE Computer Society says weavers who feared for their jobs forced Jacquard to flee, yet more than 30,000 of his looms were working in Lyon by 1834, and Charles Babbage is believed to have taken the punched-card idea for his Analytical Engine from them.
LessonKeeping the pattern apart from the machine lets one loom weave any design, an idea computing later borrowed.
Credit
Joseph Marie Jacquard
1924
A loom that stops itself
Sakichi Toyoda built the Type G automatic loom, which swapped in a full shuttle without slowing down and stopped when a warp or weft thread broke. Japan's patent office calls its non-stop shuttle change "the first of its kind in the world"; England's Platt Brothers bought the rights in 1929, and the money helped found Toyota Motor.
LessonA machine that stops itself at a fault prevents bad cloth and means people "need only respond when there is an abnormality," the principle Toyota calls jidoka.
Credit
Sakichi Toyoda
1995
Whole sweaters, no seams
Shima Seiki showed its WholeGarment knitting machine at a textile machinery show in Milan in 1995. It knits a complete garment in one piece from yarn, with no cutting or sewing; Nippon.com reports that a pullover takes about 30 minutes. Shima Seiki's president, Mitsuhiro Shima, told Nippon.com that cutting and sewing wastes about 25% of the fabric, and that such machines make only about 1% of the world's garments.
Credit
Shima Seiki and its founder, Masahiro Shima
Watch for
3D weaving enters a mill
Unspun's OneWeave machine weaves a garment-shaped tube straight from yarn. Unspun and Arvind, a large Indian textile maker, say Arvind will install two OneWeave machines in Ahmedabad, with production projected to start by December 2026 and more than 30 further machines possible in 2027 and 2028. They give no output, cost or waste figures.
Achieved whenan outside party reports garments shipped from the Arvind line, with output per machine and cost per garment.
Claimed by
Unspun and Arvind Limited, November 2026
Open
01
Robot repairs a broken warp
A robot arm that repairs a broken warp thread on a stopped loom. It finds both broken ends, ties in a new length of yarn, threads it back through the drop wire, heddle and reed (the parts that guide each thread), and hands the loom back for restart.
The briefCredit · unclaimed02
Fault alerts for handlooms
A phone or small camera fixed to a handloom that spots weaving faults while the cloth is being made and alerts the weaver.
The briefCredit · unclaimed
Open 01 · the brief
Robot repairs a broken warp
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot arm that repairs a broken warp thread on a stopped loom. It finds both broken ends, ties in a new length of yarn, threads it back through the drop wire, heddle and reed (the parts that guide each thread), and hands the loom back for restart.
Why it is still open
Looms stop themselves when a thread breaks, but Textile World described the next step in 2017 as "a manual repair by the operator." A patent for an automatic warp-repair machine was published in 1990 (EP 0364404, Texipat), and repair was still described as manual 27 years later.
Built with what exists
a low-cost arm such as the SO-101 with Hugging Face's LeRobot software, or a two-armed research robot; a robot model trained from a few human demonstrations, such as NVIDIA GR00T 2 (see the Note "Five demonstrations per task"); a close-up camera; a retired or hand-operated loom as the test rig, with its power isolated during each repair.
First step
Film a weaver fixing 20 warp breaks with a head-mounted camera, and write down each step and its time. That film is both the training data and the baseline.
Done looks like
20 filmed repairs on the test loom, each timed, with a published tally of how many leave the next 10 cm of cloth free of faults, set beside a weaver's average time for the same job.
Open 02 · the brief
Fault alerts for handlooms
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone or small camera fixed to a handloom that spots weaving faults while the cloth is being made and alerts the weaver.
Why it is still open
Das and Deka built a fault-finding model from handloom cloth made in Sualkuchi, Assam, India, and published it in October 2025. They tested it only on stored images, list on-loom use as future work, and report that human inspectors find only about 70% of faults.
Built with what exists
an Android phone or a Raspberry Pi 5 with a camera module; small object-detection models such as YOLO or MobileNet that run on the device; a buzzer or the phone's own speaker for alerts.
First step
Photograph 50 meters of handloom cloth whose faults an inspector has marked, and train a first model on it.
Done looks like
Over 100 meters of cloth woven at a handloom cluster, the device flags at least 90% of the faults a trained inspector finds, with fewer than one false alarm per meter, and the results are published.