Industries / Consumer goods / Textiles and apparel
Cutting
Cutting turns a design into flat fabric pieces: pattern makers draw each piece in every size, a marker (the layout plan) fits the pieces onto the fabric with little waste, and cutters slice through stacks of spread fabric.
5
Milestones achieved, from 1863 to 2019.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1863
Patterns come in sizes
Ebenezer Butterick, a tailor in Sterling, Massachusetts, began making graded tissue-paper patterns in 1863. Graded means one pattern is scaled into a set of sizes; before this a pattern came in one size and the sewer resized it by hand. By 1873 his firm sold about six million patterns a year.
LessonA fixed size range let one style be cut for many bodies.
Credit
Ebenezer Butterick and his family
1888
An electric knife for cloth
George Eastman, a Canadian inventor, mounted a small electric motor on a cutting base to drive a reciprocating knife, a blade that moves up and down like a saw. A 2013 tribute in the US Congressional Record calls it the first electric fabric-cutting machine.
Credit
George Eastman, Eastman Machine Company
1970
A computer steers the knife
H. Joseph Gerber's GERBERcutter cuts stacks of material with a knife steered by a computer. The first unit went to General Motors' Fisher Body Division in 1970 to cut car seat covers and ran for more than 22 years, according to a National Academy of Engineering memorial tribute.
Credit
H. Joseph Gerber, Gerber Scientific
1976
Software feeds the cutter
Garment makers were slow to buy the GERBERcutter in the early 1970s. By the middle of the decade other firms were selling minicomputer systems for designing clothes, and in 1976 sales of the $500,000 cutters "began to grow dramatically," with Blue Bell and VF Corporation placing large orders. Lectra, founded in Bordeaux in 1973, became the other main maker of such systems.
LessonA fast cutter sold slowly until software could give it work.
Credit
Gerber Scientific; computer design makers such as Lectra
2019
Screen samples beside cloth
3D software such as Browzwear drapes a digital pattern on a virtual body, so a team can judge a style before anyone sews a sample. By 2019 Nordstrom's own-brand teams showed 3D samples next to physical ones in buying meetings, but still used physical samples to check fit.
LessonScreen samples replaced some sewn samples, but not the real fitting.
Credit
Browzwear and brand teams such as Nordstrom's
Watch for
Cutting-room planning in minutes
Lectra says its Valia Manufacturing software will automate marker planning and nesting (packing the pieces tightly) at Goodwill South Florida in Miami, a plant that makes more than one million US military garments a year. The release projects planning time falling from two days to 15 minutes, about 1% less fabric used, and payback in about five months; all three are expected results, not measured ones.
Achieved whenGoodwill or an outside auditor publishes measured planning times and fabric use after at least one full season.
Claimed by
Lectra and Goodwill South Florida, June 2026
AI-made pattern, sewn for real
EasyFashion, a research system, turns a user's design wishes and estimated body measurements into sewing patterns. A studio tailor outside the team sewed one dress from its output; the wearer said it fit, but the paper reports no measurements of the finished dress.
Achieved whenmany garments from such a system are sewn and measured against target sizes, ideally by another group.
Claimed by
Hong Qu and co-authors, led from Hong Kong Polytechnic University, September 2026
Open
01
Robot bundles cut pieces
A robot arm with a camera overhead that takes each cut piece off the table, matches it to its pattern piece and size from the marker file, and stacks it in the labeled bin for that size. In a factory, a bundle is the set of matching pieces that goes to the sewing floor together.
The briefCredit · unclaimed02
Sew and measure AI patterns
Make patterns from photos of a simple T-shirt or skirt with an open photo-to-pattern model, scale them to a published size chart, then sew the garments and measure them.
The briefCredit · unclaimed
Open 01 · the brief
Robot bundles cut pieces
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot arm with a camera overhead that takes each cut piece off the table, matches it to its pattern piece and size from the marker file, and stacks it in the labeled bin for that size. In a factory, a bundle is the set of matching pieces that goes to the sewing floor together.
Why it is still open
The ARM Institute, a US manufacturing-robotics institute, lists a project by Apparel Robotics and MassRobotics, marked complete in 2024, to unload cut pieces from a cutting table. The page lists planned capabilities but reports no results. It also states that 80% of clothing labor cost is material handling.
Built with what exists
an SO-101 arm with Hugging Face's LeRobot software; a small vacuum cup or needle gripper for picking single layers of fabric; a webcam above the table; a three-size T-shirt pattern from Seamly2D or GarmentCode, both open source; pieces cut by hand with a rotary cutter.
First step
Cut one three-size T-shirt marker from cotton, photograph it, and record 50 picks while a person steers the arm.
Done looks like
20 filmed runs of a 30-piece single-layer marker, 600 picks in all, with a published tally of pieces placed in the right bin, dropped or folded. Target: 95% in the right bin.
Open 02 · the brief
Sew and measure AI patterns
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Make patterns from photos of a simple T-shirt or skirt with an open photo-to-pattern model, scale them to a published size chart, then sew the garments and measure them.
Why it is still open
EasyFashion made one dress and judged fit only by the wearer's opinion. Its authors write that "stronger validation should involve more garments, more materials, and more diverse production contexts." Other pattern models, such as Sewformer and GarmentCode, were checked in simulation, not by sewing.
Built with what exists
Sewformer, a photo-to-pattern model from SIGGRAPH Asia 2023 with released code; GarmentCode to set body measurements; Seamly2D to edit and print; a home sewing machine and a tape measure.
First step
Run Sewformer on five photos of one T-shirt, then sew one garment from the best pattern and measure it.
Done looks like
20 garments in at least three sizes, each measured at four size-chart points, with a published table of the differences. It passes if 90% of the measurements fall within a tolerance set in advance, for example 1 cm either way.