Industries / Construction and property / Engineering and architecture
Surveying
Surveying measures the position, height and shape of land and structures, fixes where property lines run, and marks on the ground where new work is to be built.
c. 2500 BCE
The builders of Khufu's Great Pyramid at Giza set its sides square to north, south, east and west to better than four minutes of arc, about one-fifteenth of a degree, by the measurement of the engineer Glen Dash in the Journal of Ancient Egyptian Architecture, as reported by Live Science; Khafre's pyramid and the Red Pyramid at Dahshur are turned slightly counterclockwise in the same way, and no record says how the alignment was done.
34
Milestones achieved across 6 domains.
7
To watch for: announced, not yet confirmed outside.
13
Open deliverables. Nobody has shipped them.
In one minute
Where it started
About 4,500 years ago Egypt's pyramid builders squared Khufu's pyramid to the compass points within a fifteenth of a degree, and Babylonian kings later recorded land grants on carved stones. From 1617, when Willebrord Snell measured the Netherlands by a chain of triangles, a few carefully measured baselines could fix the positions of a whole country. In 1785 the United States ordered its western lands surveyed into square townships before any were sold, and the Bureau of Land Management counts almost 1.5 billion acres surveyed that way since.
Where it stands
Satellite receivers and total stations, which measure angles and distances together, have replaced chains and hilltop sightlines; Ordnance Survey began replacing Britain's triangulation pillars with a GPS network in 1990. Lasers flown from aircraft have measured the ground height of every square meter of the Netherlands to within 5 cm, by the Dutch program's account, and by the end of fiscal year 2025 the US Geological Survey had baseline lidar available or in progress for 99% of the country. The US National Geodetic Survey is preparing new reference frames that will move every US coordinate by up to 4 m.
What is open
Many accuracy figures the trade relies on are the makers' own: those for walking scanners, AI that draws survey linework, layout robots and crowd-run correction stations. Old records, from 19th-century field notes and corner record sheets to handwritten land records in Bangladesh, are still read and checked by hand or not at all. Public lidar, surveyed checkpoints, free point-cloud software and AI models that read page images are enough to start on most of these jobs.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Boundaries
Boundary work fixes where one owner's land ends and the next begins: describing a parcel in words and numbers, marking its corners on the ground, and later finding those marks again.
5 · 1 · 2
Last achievedContract surveys end in fraud1910
Watch forAI agents plot legal descriptions
2
openMapping the ground
Mapping the ground is the work of fixing the position and height of points across a region or a whole country, so that every later survey, map and building can be tied to the same framework.
7 · 1 · 2
Last achievedEverest measured from the top2020
Watch forA crowd-built correction network
2
openConstruction layout
Layout, also called setting out, is the work of marking on a site where the walls, columns, roads or tunnel lines of a design go, and of checking afterwards that they were built there.
4 · 1 · 2
Last achievedGotthard's ends meet2010
Watch forRobots drill from the plans
2
openAerial and drone mapping
This work measures the ground from above, from photographs and laser pulses taken from balloons, aircraft and drones, and turns them into maps and elevation models whose accuracy is stated and checked.
7 · 1 · 2
Last achievedA national lidar baseline2025
Watch forAI drafts the survey linework
2
openLaser scanning
Laser scanning measures buildings, structures and sites from the ground by sweeping a laser across them and recording millions of points, which together form a point cloud, a 3D copy of every surface the beam reached.
6 · 2 · 2
Last achievedA scan guides the rebuilding2019
Watch forSurvey grade from a backpack
2
openRecords
Survey records are what a survey leaves behind and what later surveyors measure against: field notes, maps of parcels, registers of owners, and the datums, the agreed starting points and units from which every coordinate is counted.
5 · 1 · 3
Last achievedTwo feet become one2023
Watch forNew US datums for 2022
3
open
Open in surveying
3 of 13 open deliverables
Open · Boundaries
Corner records against the map
A reader that takes the coordinates surveyors measured for corners of the Public Land Survey System (PLSS) from Utah's monument record sheets, the forms filed when a surveyor finds or resets a corner, and compares each with the position the Geographic Coordinate Data Base (GCDB) gives for the same corner. The GCDB is the GIS record of PLSS corners that maps and parcel layers are drawn on. The output is a county-by-county map of the gaps and a list of corners where the two disagree by more than the GCDB's own reliability figure.
Built with what exists
The Utah PLSS Point GCDB feature service; monument record sheets from the PLSS web app; a vision-language model, an AI model that reads page images, to pull coordinates, datum and units from the sheets; pyproj, a free library, to convert between datums and units; a person checking a sample of readings.
Open · Mapping the ground
Audit the volunteer base stations
An independent check of the base stations that volunteers and small networks run for free or low-cost RTK corrections. For each station, log 24 hours of its public stream, compute its position separately with a government positioning service, and compare that with the position the station tells its users it is at. Then test fixes from a sample of the stations on published survey marks.
Built with what exists
RTKLIB's str2str to log streams and convbin to turn them into standard RINEX files, for stations that send raw observations; Natural Resources Canada's free CSRS-PPP service or the US National Geodetic Survey's OPUS for independent positions; a multi-band receiver such as a u-blox ZED-F9P for the field test; Python.
Open · Construction layout
Check marked layout by phone
A phone method that photographs a floor after layout, with chalk lines or robot-printed lines, finds every line and mark, and reports how far each one sits from where the CAD drawing puts it, before any wall, sleeve or anchor goes in.
Built with what exists
A phone camera; printed ChArUco targets, checkerboards with coded markers, placed on known control points; OpenCV for camera calibration and target detection; Meta's SAM 2 image segmentation model to pick out lines and marks; the ezdxf library to read the CAD file; a total station borrowed from a college surveying lab as the reference.
Where it sits
Broader