Industries / Food, farming and forestry / Food and beverage processing / Soft drink bottling
Filling lines
Filling lines are the rows of machines that make or receive empty bottles and cans, fill them with drink, seal them and send them on to labelling and packing, at tens of thousands of containers an hour.
5
Milestones achieved, from 1980 to 2005.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1980
Bottles blown at the bottler
Sidel, a French machine maker, delivered its first machine for blowing PET bottles, the SBO 10, rated at 3,600 bottles an hour, to Barraclough, a family-owned British soft drink maker, in September 1980. Its SBO 24 of 1981 made 15,000 bottles of 16 ounces an hour, and by the mid-1990s Sidel machines passed 50,000 an hour. US bottlers held back until 1983, when Sidel let one use an SBO 24 free for six months. A South Carolina Pepsi bottler took the offer and bought the machine, and Coca-Cola installed its first SBO 24 in 1984. Soft drink makers could now blow PET bottles in their own plants.
Lessonbottlers bought the new machine only after a free trial let them prove it on their own line.
Credit
Sidel
1985
Hot juice in plastic bottles
Hot filling pours juice, tea or a sports drink into the bottle hot, at about 88 to 93 °C (190 to 200 °F) in the examples of the patent below, which helps keep it from spoiling. As the drink cools in the sealed bottle it shrinks and pulls a partial vacuum that crumples an ordinary PET bottle. Monsanto's US patent 4,497,855, with a priority date in 1980 and granted on 5 February 1985, covered a heat-set PET bottle with panels that flex inward to take up the shrinkage. Its worked example puts the shrinkage of 1,000 cc of water cooled from 93 °C to 4 °C at about 37 cc. Plastics Technology reported in 2007 that vacuum panels had been the conventional design for hot-fill PET bottles, and that PET without heat setting can be hot-filled only at 54 to 66 °C (130 to 150 °F).
Lessonthe bottle had to be designed around the filling method, and its panels exist only because the drink goes in hot.
Credit
Purushottam D. Agrawal, Monsanto
1993
A tampering scare disproved
In June 1993 people in the United States reported finding syringes in cans of Diet Pepsi. PepsiCo did not recall its drinks. It said no syringe had been found in an unopened can, and it showed how its lines work: about 1,600 cans a minute, each turned upside down before filling and closed with a lid within seconds, so nothing could be dropped in at the plant. A store camera in Aurora, Colorado, recorded a shopper apparently putting a syringe into an open can, and FDA Commissioner David Kessler announced arrests for false reports.
Lessona bottler that can show how its line works, step by step and at full speed, can show where contamination could and could not have entered.
Credit
PepsiCo; US FDA
1994
Sterile filling without heat
Aseptic filling sterilises the drink, the bottles and the caps separately and fills them inside a sterile enclosure, so a drink that would spoil can go into PET without being filled hot. Dai Nippon Printing (DNP) says it launched its aseptic filling system for PET bottles in 1994, the first in Japan to sterilise the bottles with hydrogen peroxide. In 2022 the trade magazine International Bottler & Packer reported that Nongfu Spring, China's largest packaged-water company, had ordered more than 20 DNP aseptic systems in 12 years. It began with two tea lines in 2010, after its staff saw a DNP line in Japan filling 72,000 bottles an hour of green tea and milk drinks. DNP says it has delivered more than 230 systems and holds over 60% of Japan's market; those are its own figures.
Credit
Dai Nippon Printing
2005
One data language for lines
A bottling line joins machines from different makers, and each once reported its counts, stops and faults in its own way, so connecting them to the plant's production software meant custom programming for every machine. WS Pack, the packaging and bottling part of the Weihenstephan Standards, was published in 2005. It fixes which data points each machine must provide and how they are sent, so the software can work out the line's efficiency from the same figures on every line. The OPC Foundation, which maintains a widely used industrial data standard, has published a version for its OPC UA interface (OPC 40600). KHS says it took part from the start and tests the interface on each machine before delivery.
Credit
Technical University of Munich, Weihenstephan; the Weihenstephan Standards Industry User Group
Watch for
Cans at 135,000 an hour
KHS and the Swiss seamer maker Ferrum say their updated SmartCan Eco filler can fill up to 135,000 cans an hour. A seamer is the machine that rolls the lid onto the can. Their current FS14 seamer tops out at 108,000 cans an hour, and they say a new FS18 seamer, launched for the drinktec fair in September 2025, matches the filler. They also say the clean zone around the filler is up to 93% smaller than in older housings, and that format changes on the seamers take about half the time they did.
Achieved whena bottler, or an outside party working for one, reports a can line running at 135,000 cans an hour over full production shifts.
Claimed by
KHS, August 2025
Aseptic lines for small plants
Krones says a new compact version of its Contipure AseptBloc aseptic filling block fits in 100 square metres, more than 50% less floor space than its standard blocks, and runs from 8,000 bottles an hour, for small and mid-sized plants and new product launches.
Achieved whena small or mid-sized bottler runs one in production and it, or an outside party, publishes the line's output and sterility test results.
Claimed by
Krones, November 2025
Open
01
Foam limit at the filler
An open set of high-speed videos of carbonated soft drinks being filled and then brought back to normal pressure, across drink temperature, carbonation level and filling rate, with the foam height measured in each frame. Add a model that predicts the fastest fill a given drink and bottle can take without foam overflowing.
The briefCredit · unclaimed02
Cap torque without opening
A public test of whether cameras reading where each screw cap has stopped on the bottle neck, with or without the capping machine's own torque record, can predict the twisting force (torque) needed to open the bottle, checked against bottles opened on a torque tester.
The briefCredit · unclaimed
Open 01 · the brief
Foam limit at the filler
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open set of high-speed videos of carbonated soft drinks being filled and then brought back to normal pressure, across drink temperature, carbonation level and filling rate, with the foam height measured in each frame. Add a model that predicts the fastest fill a given drink and bottle can take without foam overflowing.
Why it is still open
Foam limits how fast fizzy drinks can be filled. The closest published work, a 2017 paper by Elisabetta Salerno and colleagues at the University of Modena and Reggio Emilia with Sidel, filmed foam on a test filler under one set of conditions only: a 1.5 L bottle, 4.3 volumes of carbon dioxide, 17.5 °C and 4.4 bar above atmospheric pressure. The timing of its pressure-release steps was withheld under a non-disclosure agreement. No public set of filling videos across conditions turned up in literature or GitHub searches for this file.
Built with what exists
A phone or action camera that records 240 frames a second, or a rented high-speed camera, with an LED backlight; a hand counter-pressure bottle filler of the kind home brewers use, PET bottles filled no higher than the carbonation of shop-bought soft drinks, and a polycarbonate shield around the bench; OpenCV or Meta's Segment Anything 2 to track the foam line; and, where a bottler agrees, footage its staff film through the guard windows of a working filler.
First step
Film 20 fills of one shop-bought cola, half chilled to 4 °C and half at 15 °C, on a home-brew counter-pressure filler behind a shield, and measure the foam height frame by frame.
Done looks like
At least 300 filmed fills covering at least three temperatures, three carbonation levels and three fill rates, published with their foam-height curves, and a model that predicts the peak foam height of 50 fills it was not trained on within 10%.
Open 02 · the brief
Cap torque without opening
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public test of whether cameras reading where each screw cap has stopped on the bottle neck, with or without the capping machine's own torque record, can predict the twisting force (torque) needed to open the bottle, checked against bottles opened on a torque tester.
Why it is still open
Caps that are too loose leak gas, and caps that are too tight are hard to open. A 2016 US patent held by Pressco Technology, a machine-vision company, says capping heads "must typically be manually adjusted to the correct application torque and checked periodically", and claims a camera method that estimates opening torque from the cap's final position against the neck. No published accuracy figure for such a method, and no open project on GitHub, turned up in searches for this file.
Built with what exists
Two USB machine-vision cameras or phones on a fixed stand, printed marks or the cap's own ridges for reading its angle, OpenCV, a benchtop digital cap torque tester, a hand or benchtop capper with adjustable torque, and scikit-learn for the model.
First step
Cap 100 bottles at three torque settings on a hand capper, photograph each neck from two angles, open them on a borrowed torque tester and plot measured torque against cap angle.
Done looks like
1,000 bottles from at least two cap types and two capping heads, each photographed and then opened on the tester, with predicted opening torque within 10% of the measured value for at least 90% of bottles the model was not trained on. Images, measurements and code are published.