Industries / Transport and vehicles / Shipbuilding and repair
Dry dock and repair
Repair yards lift ships out of the water, in a dock that is pumped dry, a floating dock or a ship lift, so workers can inspect, mend, repaint or convert the parts of the hull that are normally under water.
7
Milestones achieved, from 1495 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1495
England's first dry dock
Henry VII had a dry dock built at Portsmouth: a basin that a ship floats into, which is then closed and emptied so the hull rests dry for work. Royal Museums Greenwich dates the dockyard to 1495 and calls it one of the oldest dockyards in the world still in operation. Historic England's listing calls Portsmouth the site of "the first dry dock in England" in one passage and "the site of the world's first dry dock" in another; today's Numbers 1, 2 and 3 Docks, built between 1789 and 1803, stand at about the same spot.
Credit
Henry VII's navy at Portsmouth
1957
The ship lift
Raymond Pearlson, a naval architect and marine engineer, began work in 1953 on a boat lift and transfer system for a Miami shipyard, and in 1957 built what his family's company calls "the first shiplift system", with a lifting capacity of 100 tons. A ship lift raises a vessel out of the water on a platform, "lifted in perfect synchrony" in the words of today's Syncrolift company, so one lift can move ships to several berths ashore. The Pearlson company counts more than 280 ship lifts designed and built under the family's leadership since 1957.
Credit
Raymond Pearlson, Pearlson Engineering Company
1977
Tankers become oil platforms
In August 1977 a tanker-based floating production facility, held by a rigid mooring arm, started up, as Klein and Smulders reported to the Society of Petroleum Engineers in 1984. Offshore magazine wrote in 1997 that "Shell was the first to experiment, in 1977, when a 60,000dwt unit was chosen for its Castellon Field" off Spain, moored in 117 m of water. Converting tankers into FPSOs (floating production, storage and offloading units, ships that process oil from undersea wells and hold it until a shuttle tanker collects it) became regular work for conversion yards; the same article lists conversions for Amerada Hess, Petrobras and BP.
Credit
Shell
2017
A printed propeller passes
RAMLAB in Rotterdam built a three-blade propeller designed by Promarin from 298 layers of nickel aluminum bronze, laid down by wire arc additive manufacturing (a welding robot building up metal bead by bead). Bureau Veritas, a classification society (a body that sets and checks technical rules for ships), verified the development, production and testing, which included bollard pull, crash stop and speed trials on a Damen Stan Tug 1606. Maritime Executive reported it as the "world's first class-approved 3D printed ship's propeller".
Credit
RAMLAB, Promarin, Autodesk, Damen and Bureau Veritas
2020
Fire during a refit
On 12 July 2020 fire broke out aboard the amphibious assault ship USS Bonhomme Richard, which was pierside in San Diego in a two-year, $250 million upgrade. It burned for five days, and the Navy decommissioned the ship in April 2021. The Navy's investigation found that "the ship was lost due to an inability to extinguish the fire": 87 percent of the fire stations had equipment problems or had not been inspected, combustible material was stored badly, and the crew did not know how to start the foam system. A Navy review of 15 shipyard fires over 12 years found the same failures to follow fire prevention, detection and response rules.
Lessona ship in repair has more people aboard, including contractors, and different hazards than at sea, so fire readiness has to rise in the yard, not fall.
Credit
US Navy investigation, as reported by NBC News
2024
Drones measure steel thickness
ABS and DNV, two classification societies, approved the inspection firm Interocean to take ultrasonic thickness measurements (readings of how much steel is left after corrosion) by drone, using an Elios 3 UT, on mobile offshore units. Offshore Engineer reported Interocean as "one of the first companies" to receive the approval. The company says the drone reads about ten times faster than traditional methods; that figure is its own.
Credit
Interocean, with approvals from ABS and DNV
2025
Navy ships repaired in Korea
USNS Wally Schirra, a US Navy dry cargo ship, left Hanwha Ocean's Geoje yard on 12 March 2025 after a seven-month overhaul of 300 work items, including hull corrosion and a new rudder; USNI News calls it South Korea's first maintenance, repair and overhaul of an American naval vessel. HD Hyundai followed with USNS Alan Shepard at Ulsan, which began with about 60 tasks in September 2025; more than 100 further items were found during the work, and the ship left on 6 January 2026.
Lessonrepair work grows once a ship is opened up; Hanwha had said three months for the Wally Schirra job, and the Navy's figure was seven.
Credit
Hanwha Ocean, HD Hyundai Heavy Industries and the US Navy's Military Sealift Command
Watch for
Remote inspection counts for surveys
IMO adopted amendments to the 2011 ESP Code, the enhanced survey rules for bulk carriers and oil tankers, through resolution MSC.584(111), with guidelines in MSC.1/Circ.1700. For periodical surveys starting on or after 1 January 2028, a surveyor may use remote inspection techniques (cameras, drones, robots and sensors) instead of physically reaching the steel for close-up surveys and the thickness measurements that go with them.
Achieved whenclass societies report surveys from 2028 that were credited on remote inspection, with the random confirmatory checks the rules call for.
Claimed by
IMO, as summarized by Lloyd's Register in October 2026
Open
01
Count ships in repair docks
A public weekly record of which dry docks at the world's large commercial repair yards hold a ship, made by drawing each dock's outline once and checking free satellite images of it every week with a small image model. Military yards stay out of scope.
The briefCredit · unclaimed02
A shared coating-grade test
A public set of photographs of ballast tank coatings (the paint inside the tanks a ship fills with seawater for balance), each graded GOOD, FAIR or POOR by at least two qualified surveyors using the condition terms of IMO's enhanced survey rules, with a baseline model and its scores. GOOD means "only minor spot rusting", and FAIR means local breakdown at stiffener edges and weld joints or light rusting, short of POOR. Photographs come from crews and surveyors during their normal work; nobody should enter a tank to make this.
The briefCredit · unclaimed
Open 01 · the brief
Count ships in repair docks
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public weekly record of which dry docks at the world's large commercial repair yards hold a ship, made by drawing each dock's outline once and checking free satellite images of it every week with a small image model. Military yards stay out of scope.
Why it is still open
The closest published work, Qin and colleagues (Remote Sensing, 2023), uses satellite images to judge whether Chinese building yards are working or idle; it does not count which docks hold a ship. An analyst who clustered ship-position (AIS) data to find berths found that the method mistook dry docks for berths and had to list repair sites by hand.
Built with what exists
Sentinel-2 images, free from the EU's Copernicus program, with 10 m pixels and a new pass about every 5 days; dock outlines from OpenStreetMap, which tags them dock=drydock or dock=floating; QGIS; a small image classifier fine-tuned in PyTorch.
First step
map the dry docks of three repair yards in OpenStreetMap and look through a month of Sentinel-2 images by eye to see whether a ship in dock can be told from an empty dock at 10 m.
Done looks like
52 weeks of counts for 20 named commercial repair yards, with at least 90 percent agreement against 300 dock-weeks checked by hand against sharper images or yard announcements.
Open 02 · the brief
A shared coating-grade test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of photographs of ballast tank coatings (the paint inside the tanks a ship fills with seawater for balance), each graded GOOD, FAIR or POOR by at least two qualified surveyors using the condition terms of IMO's enhanced survey rules, with a baseline model and its scores. GOOD means "only minor spot rusting", and FAIR means local breakdown at stiffener edges and weld joints or light rusting, short of POOR. Photographs come from crews and surveyors during their normal work; nobody should enter a tank to make this.
Why it is still open
ABS reported in 2021 that its AI tool "graded the imagery with 98.9% accuracy" on more than 600 images of one client's ballast tanks; the images are not public, and the release names no outside evaluator. The largest published research set found, by Yu and colleagues at Penn State with PPG (2022), holds 730 annotated photos of outer hulls, not tanks, and the paper does not release it.
Built with what exists
Label Studio for grading; an image segmentation model such as Meta's SAM 2 to mark rusted area; a fine-tuned classifier; Cohen's kappa (a standard measure of how often two graders agree beyond chance).
First step
ask a ship manager or a maritime academy with a training ship for tank photos from recent surveys, and have one retired surveyor grade the first 100.
Done looks like
2,000 graded images from at least 20 ships, the agreement between surveyors reported, and a model that agrees with the surveyors at least as often as they agree with each other.