Industries / Transport and vehicles / Maritime and shipping / Ship chandlery
Sourcing
Sourcing is how a ship supplier finds what a ship has ordered, from engine spares to drinking water, and how the buyer can tell that a part is genuine.
6
Milestones achieved, from 2008 to 2026.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2008
Part numbers join the certificate
Under MARPOL Annex VI, IMO's treaty on air pollution from ships, each marine diesel engine carries a technical file. The 2008 revision of IMO's NOx Technical Code, adopted on 10 October 2008, defines "components" as the interchangeable parts that affect the engine's nitrogen oxide emissions, "identified by their design/parts number", and records them in that file. Routine replacement with parts specified in the technical file is not a "substantial modification" of the engine, and a surveyor may examine spare parts carried on board in place of the parts fitted. A spare's part number therefore bears on the engine's emissions certificate, not only on whether it fits.
Credit
IMO Marine Environment Protection Committee, resolution MEPC.177(58)..pdf)
2017
Fake bolts loosen a ferry
In April 2017 the US Coast Guard issued Marine Safety Alert 03-17 on "suspect and counterfeit items", products sold as meeting a specification that they do not meet. Investigating a ferry's propulsion failure, it found falsely marked bolts in the drive train: several bolt heads had separated from their shanks, a splined coupling worked loose from the reduction gear, and the overstressed stern tube seal let water into the engine room. One bolt head carried a maker's mark on the US Department of Energy's list of suspect and counterfeit head marks and was missing from the Department of Commerce's register of fastener insignias. The Coast Guard said it is "routinely made aware" of counterfeit marine equipment, often lifesaving and firefighting gear.
Lessonthe marks on a part can be checked against public registers before it is fitted.
Credit
US Coast Guard
2020
Printed parts reach a ship
In February 2020 the 300,000 dwt bulk carrier Berge Mafadi received 3D-printed scupper plugs, the plugs that close deck drain holes to stop spills going overboard. Maritime Executive reported it as the world's first commercial delivery of 3D-printed scupper plugs. The parts came through an early adopter program that Wilhelmsen, a ship supply and agency group, opened in December 2019 for six ship managers, with printing by the Ivaldi Group. The class society DNV GL gave each part a "print passport" number and tracked it in a trial system. Berge Bulk's procurement manager said the plugs have no universal dimensions, so a broken one used to mean buying a whole new plug.
Credit
Wilhelmsen, Ivaldi Group and Berge Bulk; DNV GL for part tracking
2020
Owners pledge against bottles
IMPA SAVE was set up in June 2020 by shipowners and ship suppliers under the International Marine Purchasing Association, the buyers' trade body, and its first campaign asks members to stop supplying ships with single-use plastic water bottles. IMPA SAVE says its founders had a combined fleet of more than 1,000 ships. The shipowners' association BIMCO, in a July 2024 guide that draws on IMPA SAVE's research, estimated from a 2021 survey of its members that seafarers drink one or two 1.5 litre bottles a day, 25 to 50 bottles per ship per day, and that the world's roughly 60,000 merchant ships use between 540 million and 1.08 billion bottles a year.
Credit
IMPA SAVE founding council; BIMCO Single-Use Plastics Task Force
2021
Class approves printed spares
From February 2021 the class society ABS, ConocoPhillips Polar Tankers, the shipyard group Sembcorp Marine and the printing firm 3D Metalforge made and lab-tested three printed metal parts: a gear set and shaft for a boiler fuel pump, a flexible coupling for a sewage system pump and an ejector nozzle for a fresh water generator. The parts were fitted on the suezmax tanker Polar Endeavour, built in 2011. After six months in service the crew took them out and inspected them, ABS surveyed them remotely, and in November 2021 ABS approved them as spare parts.
Credit
ABS, ConocoPhillips Polar Tankers, Sembcorp Marine and 3D Metalforge
2026
Non-maker parts fail an engine
On 25 January 2025 a diesel generator engine on the survey ship Kommandor Susan failed during sea trials in the Firth of Forth, Scotland. The engine room caught fire, the ship lost all power and drifted, and its anchors could not be let go because the winches needed electricity. The UK Marine Accident Investigation Branch (MAIB) reported in May 2026 that pistons, connecting rods and bearings fitted in a 2019 overhaul were not made by the engine's maker, Caterpillar, and that the owner at the time did not know. The non-maker bearings had a copper backing layer where genuine Caterpillar ones have aluminium, and the MAIB found weak bonding of that layer the likely root cause. Caterpillar had stretched the overhaul interval to 24,000 hours on the assumption of genuine parts, and the engine failed after 13,466 hours.
Lessona maker's longer service interval holds only for the maker's parts, so an owner has to know which parts went in.
Credit
MAIB, report 10/2026
Watch for
A hundred million bottles
IMPA SAVE's campaign page states that its pledgers remove "100m plastic bottles" and "4m kg of plastic" a year, and IMPA SAVE says the initiative is on the agenda of close to 15% of the world fleet. The page does not say how the figures were worked out.
Achieved whena party outside the pledgers publishes purchase or delivery records showing the fall in bottled water supplied to pledged ships.
Claimed by
IMPA SAVE, on its campaign page as read in November 2026
Open
01
Non-genuine parts, counted
A public table of every published marine accident investigation in which a non-genuine, counterfeit or unapproved part contributed. Each row gives the ship, the year, the part, how it was bought and fitted, how the fault was found, and the investigating body, with a link and a quoted passage.
The briefCredit · unclaimed02
Measure the bottle pledge
An independent before-and-after count of bottled drinking water delivered to ships that have fitted onboard drinking water systems, in litres per crew member per day, from ship suppliers' delivery records.
The briefCredit · unclaimed
Open 01 · the brief
Non-genuine parts, counted
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of every published marine accident investigation in which a non-genuine, counterfeit or unapproved part contributed. Each row gives the ship, the year, the part, how it was bought and fitted, how the fault was found, and the investigating body, with a link and a quoted passage.
Why it is still open
The MAIB's Kommandor Susan report links that case to two earlier MAIB investigations of non-genuine work and parts (Finlandia Seaways in 2018, Finnmaster in 2021), but nobody counts such cases across agencies. The Coast Guard's 2017 alert says counterfeit items reach it "routinely" and gives no numbers. The insurer The Swedish Club's 2023 report on main engine damage carries an engine maker's advice to use "only OEM spare parts" but gives no count of claims in which other parts were to blame. Searches on 19 November 2026 for a database of accident reports or claims coded for non-genuine parts found none.
assets.publishing.service.gov.ukmarinelog.comswedishclub.com
Built with what exists
The report libraries of the MAIB (searchable through the gov.uk search API), the US National Transportation Safety Board, Australia's ATSB, the Transportation Safety Board of Canada and Hong Kong's Marine Department; an AI model to screen report text for terms such as non-genuine, non-OEM, counterfeit and pattern part, returning a fixed yes or no with a quoted passage (see the Note "A thousand questions, one pass"); every hit checked by a person; a spreadsheet and Python.
First step
Query the gov.uk search API for MAIB reports since 2001 that mention non-genuine or non-OEM parts and read the first 50 by hand.
Done looks like
At least five agencies' marine reports since 2001 screened, every confirmed case published with its passage and link under an open licence, and the AI screen's misses and false hits on a hand-checked sample of 200 reports stated.
Open 02 · the brief
Measure the bottle pledge
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent before-and-after count of bottled drinking water delivered to ships that have fitted onboard drinking water systems, in litres per crew member per day, from ship suppliers' delivery records.
Why it is still open
BIMCO's 2024 guide gives a range built from a 2021 member survey, not from delivery records, and IMPA SAVE's 100 million figure comes without a method. No measured comparison of ships before and after fitting a water system was found.
Built with what exists
Delivery or invoice lines for bottled water, shared under a data agreement by one ship supplier and two or three ship managers, with ship names removed; crew numbers per ship from the managers; IMPA SAVE's public list of pledgers to find willing companies; Python with pandas.
First step
Ask one pledger on IMPA SAVE's list for a year of anonymised bottled water deliveries to five ships.
Done looks like
Litres of bottled water delivered per crew-day for at least 30 ships over the 12 months before and the 12 months after a water system was fitted, set beside 30 ships without one over the same months, published with the method and the share of ships whose records were incomplete.