Industries / Technology / Electronics and semiconductors / Semiconductor equipment
Service and parts
Service and parts is the work and trade of keeping chipmaking machines running after the sale: field engineers, service contracts, spare and worn-out parts, upgrades, rebuilt and second-hand tools, and the rules on who may service which machine.
6
Milestones achieved, from 2006 to 2026.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2006
Service gets its own accounts
Applied Materials began reporting service and related products as a separate segment, called Fab Solutions, in its annual report for fiscal 2006, with $2.21 billion of its $9.17 billion segment sales. In fiscal 2008 it renamed the segment Applied Global Services and moved all service results into it.
Lessononce service had its own line, the installed base (the machines already in customers' fabs) showed up as a business of its own.
Credit
Applied Materials
2016
Used 200 mm tools scarce
Fabs that use 200 mm wafers make chips for cars, power and sensors, and by 2016 used 200 mm "cores", old tools to be rebuilt, were scarce: SurplusGlobal, a used-tool dealer, estimated 600 to 720 were for sale against demand for about 1,000, and a Lam manager said a used 200 mm core cost more than a comparable 300 mm one. Applied Materials, ASML and Lam Research went back to making new 200 mm tools. In March 2021 SurplusGlobal's chief executive said fewer than 1,000 used 200 mm units were on the market, down from 7,000 to 8,000 about ten years before, and prices had risen about 20% in six months.
Lessonsecond-hand supply ran out because old fabs kept running and new demand kept coming, so toolmakers built old designs again.
Credit
SurplusGlobal (estimates); Applied Materials, ASML and Lam Research
2020
Experts guide repairs remotely
When COVID-19 travel limits began in 2020, ASML could no longer fly experts to customer fabs; in one case an EUV scanner being installed in Taiwan had a fault, and quarantine would have kept the expert away for at least two weeks. ASML gave field engineers Microsoft HoloLens 2 headsets, which show a remote expert what the engineer sees, and said a three-year plan took one month, with 75 headsets in use. Its manager said chipmakers' rules on protecting their designs and data had blocked this before.
Lessonthe barrier had been customer permission more than technology.
Credit
ASML customer support; Microsoft
2022
US rule covers servicing
A rule from the US Bureau of Industry and Security, effective 12 October 2022, required "U.S. persons" to hold a licence to service certain advanced chipmaking machines in China, whoever made or used them, so servicing itself became a controlled act. Blocks & Files reported that Applied Materials, Lam Research and KLA withdrew engineers and staff from Chinese plants, and that the memory maker YMTC would get no help installing, supporting or servicing machines it had bought. Lam's annual report for fiscal 2026 still lists "performing services at" some Chinese customer facilities among restricted activities; China was 34% of Lam's revenue that year.
Lessoncontrols on service reach machines already installed, not only new sales.
Credit
US Bureau of Industry and Security
2024
Dutch licence covers servicing
On 6 September 2024 the Netherlands extended its export licence requirement to two more ASML immersion scanner models, and on 10 September its Foreign Ministry told Reuters that spare parts, software updates and servicing for such machines already sold to Chinese customers are also vetted under the licence.
Lessonthe toolmaker's home country can decide whether machines abroad get parts and updates.
Credit
Dutch Ministry of Foreign Affairs
2026
Service share of sales
By each company's own figures, Lam Research's customer-support revenue was $8.35 billion of $23.23 billion (36%) in the year to June 2026, a figure that includes new older-generation tools; ASML's installed-base sales (service and field upgrades) were €8.19 billion of €32.67 billion (25%) in 2025; and Applied Global Services had $6.90 billion of $34.45 billion (20%) in the year to October 2026, after Applied moved its 200 mm equipment business out of the segment. TrendForce reports that Tokyo Electron's field business had ¥626 billion in the year to March 2026.
Lessoneach company defines service differently, so the shares are not directly comparable.
Credit
Lam Research, ASML and Applied Materials filings; TrendForce
Watch for
Robots do chamber maintenance
Lam says its Dextro cobots, robots built to work beside people, now cover eight Lam tool types, up from six; that it would ship the first one for a deposition tool in the June 2026 quarter; and that the number of routine maintenance tasks they can do has doubled since the start of 2026. At launch in December 2024 Lam said Dextro runs on a Universal Robots UR5e arm and fits worn parts with more than twice the accuracy of manual work.
Achieved whena chipmaker or an independent party publishes measured results from routine use, such as maintenance hours, error rates or tool uptime, on more than one tool type.
Claimed by
Lam Research, April and July 2026
AI suggests the fix
GlobalFoundries built an AI system with Lavorro, trained on five years of its own error logs: a technician enters a machine model and error code and gets back the likely root cause and fix. A pilot was due "soon", and the company expects "at least two points of productive time", the time a tool spends making wafers.
Achieved whenGlobalFoundries or an independent party reports measured results from routine use, such as recovery time per alarm against a baseline.
Claimed by
GlobalFoundries, February 2026
Servicing licences, refused by default
The MATCH Act (H.R. 8170), introduced in the US House on 2 April 2026 and advanced by its Foreign Affairs Committee on 22 April, defines servicing broadly, in person or remote, from installation and repair to software updates. If allies do not adopt matching rules, it would require a US licence for all servicing of covered machines at covered Chinese facilities, with a policy of denial.
Achieved whenit becomes law and the Bureau of Industry and Security publishes rules under it, or allied governments adopt matching controls on servicing.
Claimed by
Representative Michael Baumgartner and cosponsors, April 2026
Open
01
AI test on tool troubleshooting
A public set of at least 300 questions on diagnosing and maintaining chip-tool subsystems, such as vacuum pumps, gas delivery, radio-frequency power, electrostatic chucks (the plates that hold a wafer by static charge) and chamber parts, each with a checked answer and a cited public source, plus a hidden test split, a scoring script and published scores for several AI models.
The briefCredit · unclaimed02
Hobby arm swaps edge ring
An unpowered, 3D-printed mock-up of an etch chamber's wafer stage with a removable ring on locating pins, standing in for the edge ring, a part around the wafer that wears out and is replaced. A low-cost arm trained by imitation removes the ring and seats it again, on film. No real chamber, gas or power is involved.
The briefCredit · unclaimed
Open 01 · the brief
AI test on tool troubleshooting
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of at least 300 questions on diagnosing and maintaining chip-tool subsystems, such as vacuum pumps, gas delivery, radio-frequency power, electrostatic chucks (the plates that hold a wafer by static charge) and chamber parts, each with a checked answer and a cited public source, plus a hidden test split, a scoring script and published scores for several AI models.
Why it is still open
The nearest public benchmarks miss chip tools. FailureSensorIQ (NeurIPS 2025) covers 10 kinds of machine, from motors to transformers, none of them chip tools; SemiIQ (October 2026) names no maintenance module and publishes no scores; and fabops-agent-bench (November 2026) tests agents on a simulated factory, not on manuals. GlobalFoundries' system is private.
Built with what exists
public US patents and open-access papers; the PHM Society's 2018 ion-mill etch fault data and the UCI SECOM fab dataset for question material; EleutherAI's lm-evaluation-harness or the UK AI Security Institute's Inspect for scoring; Hugging Face Datasets for hosting.
First step
Pick electrostatic chucks, gather 20 public patents and papers, write 30 questions, and have a second person answer them without seeing the answers.
Done looks like
at least 300 questions, each with a source; two independent reviewers agree on at least 90% of answers; 30% held back as a hidden test; at least five models scored; the script reproduces the published scores.
Open 02 · the brief
Hobby arm swaps edge ring
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An unpowered, 3D-printed mock-up of an etch chamber's wafer stage with a removable ring on locating pins, standing in for the edge ring, a part around the wafer that wears out and is replaced. A low-cost arm trained by imitation removes the ring and seats it again, on film. No real chamber, gas or power is involved.
Why it is still open
The only system found for this kind of job is Lam's Dextro, which is proprietary, runs on an industrial arm and serves Lam's own tools; Lam's launch material describes tasks such as bolt tightening as manual today, with "up to a 5% error rate". GitHub searches for LeRobot or SO-101 projects on chamber maintenance found none.
Built with what exists
an SO-101 arm; LeRobot's recording, training (ACT or SmolVLA policies) and rollout tools; two USB cameras; a 3D printer. Note: "No download" covers LeRobot v0.7.0.
First step
Print the mock-up and record 50 teleoperated demonstrations, the number LeRobot's guide suggests as a minimum.
Done looks like
50 consecutive autonomous attempts filmed in one uncut video; an attempt counts as a success when the ring sits on all pins, checked with a printed go/no-go gauge, and nothing is dropped; the success rate, cycle time, dataset and policy are published on Hugging Face.