Industries / Technology / Electronics and semiconductors / Semiconductor equipment
Lithography
Lithography machines print a chip's pattern onto a wafer one layer at a time, mostly by shining ultraviolet light through a mask (a plate carrying the pattern) onto a light-sensitive coating called resist; some press the pattern in like a stamp, and some draw it with electron beams.
7
Milestones achieved, from 1980 to 2024.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1980
Japan's first stepper ships
A stepper projects a shrunken image of the mask onto one patch of the wafer, then moves ("steps") the wafer and prints the next patch. Nikon began shipping the NSR-1010G, which it calls the first stepper produced in Japan, after work commissioned in 1976 by the government-backed VLSI Technology Research Association. A 2003 paper from Japan's Research Institute of Economy, Trade and Industry (RIETI) says the US maker GCA then held 90% of the world stepper market, and that Nikon became the largest seller in Japan in 1983 and in the world by 1990.
Lessona toolmaker can grow with strong home customers; RIETI notes that Japanese chipmakers held 90% or more of the market for 256K memory chips in the 1980s.
Credit
Nikon; VLSI Technology Research Association
1993
The GCA rescue fails
GCA, the US stepper maker that Nikon and Canon overtook, had been rescued from debt and losses by the conglomerate General Signal in 1988, and Sematech, the US government-backed consortium of chipmakers, invested in it. In January 1993 Tech Monitor reported that General Signal wanted to sell the loss-making business. The Center for Strategic and International Studies (CSIS) puts Sematech's investment at $75 million and says it "ended with the company's closure".
LessonCSIS calls this "perhaps the consortium's biggest failure"; money for one domestic supplier did not win back a global market.
Credit
GCA; General Signal; Sematech
2001
Scanners get two wafer tables
ASML began on 1 April 1984 as a joint venture of Philips and ASM International, set up to sell a Philips stepper. In 2001 it shipped the first TWINSCAN, a scanner (a stepper that sweeps the mask and wafer past a slit of light) with two wafer tables: while one wafer is exposed, the next is loaded, aligned and measured for height, so the machine waits less. RIETI says ASML held under 10% of the market in 1990 and led it in the first half of 2002, with 45% against Nikon's 31% and Canon's 20%; VLSI Research's figures for all of 2002 are 35.2%, 33.5% and 24.9%.
Lessonleadership in lithography machines moved from GCA to Nikon to ASML in about 20 years.
Credit
ASML
2013
ASML buys its light source
EUV (extreme ultraviolet) scanners were held back by a weak light source. In October 2012 ASML said it and Cymer, its light-source supplier in San Diego, had shown 30 W in the lab, enough for 18 wafers an hour on the NXE:3300B, against ASML's target of 105 W, or 69 wafers an hour. ASML wrote in its annual report that it did not believe Cymer had the resources to finish the source without more delay, and bought it; the deal, valued at €1.95 billion, closed on 30 May 2013.
Lessona toolmaker may have to own the maker of its hardest part; a Barclays analyst said "slippage of key metrics" made it sensible to move the source in-house.
Credit
ASML; Cymer
2016
Many-beam writers draw masks
A mask writer draws the pattern onto a mask with electron beams. IMS Nanofabrication's MBMW-101, built on a platform from JEOL, writes with 262,144 beams at once in a 512 by 512 grid; in 2016 IMS's chief executive said it wrote a mask in about 10 hours against "maybe 30 hours" for a single-beam writer. IMS says it has supplied production tools since 2016, and in 2024 a manager at Micron's mask shop said EUV masks are written on multi-beam writers.
Lessonthe same idea has not worked for writing straight onto wafers; Mapper Lithography, which launched such a machine in 2016, went bankrupt in late 2018, and ASML, which bought its patents, said it would not continue the technology.
semiengineering.comims.co.atsemiengineering.comsemiengineering.com
Credit
IMS Nanofabrication, with JEOL; Intel invested from 2009
2019
Governments decide who buys
Reuters reported in January 2020 that the Dutch government had decided not to renew ASML's licence to ship an EUV scanner to a Chinese customer, widely believed to be the chipmaker SMIC, after a US campaign that Reuters said reached the White House in July 2019; the $150 million machine was not shipped. The rules later spread to DUV immersion scanners, an older kind that prints through a layer of water: by September 2024 a Dutch licence was needed for the NXT:2000i and later models.
Lessonwhen only one company can make a machine, the government where it is made decides who may buy it.
Credit
the Dutch government, under US pressure; ASML
2024
Nanoimprint sold for research
Nanoimprint lithography uses no projection lens: a template carrying the pattern is pressed into liquid resist "like a stamp" and hardened with ultraviolet light. In September 2024 Canon shipped its FPA-1200NZ2C, which it rates at a smallest line width of 14 nm, to the Texas Institute for Electronics, a Texas chip consortium, for research and prototypes. Canon had delivered the same model to Toshiba Memory in 2017, calling that progress toward mass production.
Lessona machine described as near mass production in 2017 was sold for research seven years later; a Gartner analyst quoted by The Register pointed to "a big gap" between research and high-volume production.
Credit
Canon
Watch for
Chinese EUV prototype makes light
Two unnamed people told Reuters that a team including former ASML engineers has built a prototype EUV machine in a high-security laboratory in Shenzhen, that it generates EUV light but has not made working chips, and that the official goal of working chips by 2028 may slip to 2030.
Achieved whena chipmaker or an independent lab reports wafers patterned on the machine, with measured feature sizes.
Claimed by
unnamed sources quoted by Reuters, December 2025
Chinese immersion scanners in production
The Information and Reuters report that Shanghai Aishengna Electronic Technology Group, a state-owned company set up in August 2023, has begun mass-producing Chinese-made DUV immersion scanners, planning about five in 2026 and about 20 in 2027, for chipmakers including SMIC, Hua Hong and CXMT. Reuters' source said the machine still needs testing and is far behind ASML's models; none of the companies commented.
Achieved whena named chipmaker confirms production wafers exposed on the machine.
Claimed by
unnamed sources quoted by The Information and Reuters, July 2026
Free-electron laser light source
A free-electron laser makes light by sending fast electrons through rows of alternating magnets. The US Commerce Department signed a final award of $150 million to xLight to build and demonstrate what it calls a first-of-its-kind free-electron laser prototype as an EUV light source, at the Albany NanoTech Complex in New York.
Achieved whensomeone other than xLight measures the prototype's EUV power and stability, and a scanner exposes wafers with its light.
Claimed by
xLight and the US Department of Commerce, June 2026
Open
01
Open EUV throughput model
An open program that works out how many wafers an hour an EUV scanner can expose from its light budget: the source power where light enters the scanner, the losses at each mirror and at the mask, the resist dose (the light energy per area the coating needs, in mJ/cm²), the layout of exposure fields, scan speed and the fixed handling time per wafer.
The briefCredit · unclaimed02
Open lithography shipments table
A free table of lithography machines shipped each year from 1995 to 2025, split by maker (ASML, Nikon, Canon) and by light source (EUV, the two deep-ultraviolet laser types ArF and KrF, with ArF split into immersion and dry, and the older i-line lamp), with every cell linked to the page of the filing it came from.
The briefCredit · unclaimed
Open 01 · the brief
Open EUV throughput model
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open program that works out how many wafers an hour an EUV scanner can expose from its light budget: the source power where light enters the scanner, the losses at each mirror and at the mask, the resist dose (the light energy per area the coating needs, in mJ/cm²), the layout of exposure fields, scan speed and the fixed handling time per wafer.
Why it is still open
ASML publishes results but not the power behind them: its NXE:3400C page gives at least 170 wafers an hour at 20 mJ/cm² and at least 135 at 30 mJ/cm², with no source power. A 2012 article on the EUV Litho website sets out the model and a worked example, and a search of GitHub and PyPI found no open, checked code for it.
Built with what exists
Python, NumPy, pandas and Jupyter in a public GitHub repository; ASML product pages and published papers for inputs. The Note "400 wafers an hour" explains what a wafers-an-hour rating means for a scanner.
First step
Collect every dose and throughput pair on ASML's EUV product pages into a table with sources, and code the 2012 article's example.
Done looks like
one fixed set of parameters reproduces both of ASML's NXE:3400C figures and the 2012 article's worked example (30 wafers an hour from 50 W with a 20 mJ resist) within 10%, and anyone who reruns the code gets the same numbers.
Open 02 · the brief
Open lithography shipments table
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free table of lithography machines shipped each year from 1995 to 2025, split by maker (ASML, Nikon, Canon) and by light source (EUV, the two deep-ultraviolet laser types ArF and KrF, with ArF split into immersion and dry, and the older i-line lamp), with every cell linked to the page of the filing it came from.
Why it is still open
The compiled series is sold: TechInsights' annual shipment breakdown by toolmaker sits behind its platform login. Public filings hold pieces, such as total, immersion and EUV units in ASML's annual report for 2012 and Nikon's count of its 1,000th system sold in 1987.
Built with what exists
SEC EDGAR filings; Nikon and Canon investor reports; Python with pdfplumber or Tabula; a CSV file on GitHub; an AI model to draft rows from filings for a person to check.
First step
Pull "systems sold (in units)" and any split by light source from each ASML annual report on EDGAR.
Done looks like
at least 25 years for three makers, every number sourced to a URL and page, yearly totals that match each maker's reported totals, gaps marked as gaps; a second person checks 30 random cells and finds no errors.