BRENNEN

Industries / Technology / Electronics and semiconductors / Semiconductor equipment

Etch

Etch machines remove material from a wafer so that only the pattern printed by lithography stays, using liquid chemicals or a plasma, a gas made electrically charged by radio-frequency power.

6

Milestones achieved, from 1967 to 2013.

3

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1967

    Oxygen plasma strips resist

    Photoresist, the light-sensitive coating used as a stencil, was removed with a liquid organic solvent. In 1967 Stephan Irving of Signetics announced a dry method that removes it with an oxygen plasma, and the same year LFE built the method into a machine, the plasma asher; Tokyo Ohka released one in Japan in 1971. The Semiconductor History Museum of Japan calls this the first use of plasma in chipmaking.

    Lessonplasma entered the factory as a cleaning tool before it was trusted to cut patterns.

    shmj.or.jpchiphistory.org

    Credit

    Stephan (Steve) Irving, Signetics; LFE

  2. 1974

    Ions etch straight down

    Early plasma etching was isotropic: it ate sideways under the stencil as fast as it cut down, which the Semiconductor History Museum of Japan says could no longer be ignored by about 1975, when the smallest chip features were 3 µm. Reactive ion etching (RIE) pulls ions straight down onto the wafer with an electric field, so the etched shape matches the mask. The museum credits Nichiden Varian (Nippon Electric Varian, now Canon Anelva) with first developing RIE in 1974; its DEA-503 etched seven 100 mm wafers at a time with fluorocarbon gases, and the name RIE came from IBM.

    Lessona finer stencil is wasted if the etch blurs it, so etch machines have to keep pace with lithography.

    shmj.or.jpshmj.or.jp

    Credit

    Nichiden Varian (now Canon Anelva)

  3. 1981

    Etch results become repeatable

    A year after its founding, Lam Research introduced the AutoEtch 480, a plasma etcher that handled one wafer at a time, with double load locks (airlocks that keep the chamber under vacuum), robot arms, microprocessor control and stored recipes. David Lam wrote that Tegal had pioneered single-wafer etching in the 1970s, but that handling one wafer at a time did not by itself make results reproducible; automation did. Applied Materials' AME 8100, which etched wafers in batches, had made Applied the world's largest supplier of etch machines within nine months of its launch, the Chip History Center says.

    Lessonchipmakers paid for predictable results, and batch etchers dominated only until single-wafer machines arrived.

    chiphistory.orgsst.semiconductor-digest.comchiphistory.orgelectrochem.org

    Credit

    David K. Lam, Lam Research; Tegal; Dan Maydan, David Wang and Sass Somekh, Applied Materials

  4. 1992

    Bosch process etches deep silicon

    Franz Laermer and Andrea Schilp at Robert Bosch patented a way to cut deep, straight-walled holes in silicon (German priority December 1992, US patent 1996): a short fluorine etch step alternates with a step that coats every surface in a thin Teflon-like polymer, so the next etch step cuts only through the floor. The patent gives 2 to 3 µm of depth per etch step and etch rates of 2 to 20 µm a minute. The European Commission says Bosch first used it in an airbag sensor in 1997 and that it spread to "practically all MEMS fields" (MEMS are tiny mechanical devices made like chips); a 2021 study ran it on an Oxford Instruments machine. The method is now called deep reactive ion etching (DRIE).

    Lessontwo simple steps in turn beat one mixed plasma, which the patent says left "bottle-type" profiles.

    image-ppubs.uspto.govec.europa.eupmc.ncbi.nlm.nih.gov

    Credit

    Franz Laermer and Andrea Schilp (named Andrea Urban by the European Commission in 2007), Robert Bosch GmbH

  5. 1997

    Plasma charge breaks gates

    The charge that makes straight etching possible also builds up on the wafer: metal lines being etched gather it like antennas and pass it into transistor gates, where it can break the thin insulator beneath. The Semiconductor History Museum of Japan lists this damage among the problems RIE brought, and a 1997 Solid State Technology article described a "latent antenna" lasting about 3 seconds near the end of a metal etch that, if etching inside dense areas ran 10% slower, would "nearly guarantee catastrophic breakdown". Part of the fix moved into chip design: factories now give designers antenna rules, which cap the ratio of metal area to gate area.

    Lessona machine problem can become a rule that every chip layout must pass.

    shmj.or.jpsst.semiconductor-digest.comwww2.avs.org

    Credit

    studied by many groups, including G. S. Hwang and K. P. Giapis at Caltech (1999)

  6. 2013

    Memory stacks, holes deepen

    Samsung began mass-producing 3D V-NAND flash memory, which stacks up to 24 layers of memory cells and joins them by etching holes from the top layer to the bottom. Each later generation added layers, so the holes got deeper: Semiconductor Engineering reported in January 2026 that the channel-hole etch was "approaching 70:1" aspect ratio (70 times deeper than wide), and Lam says over 7,500 of its high-aspect-ratio etch chambers run in memory production, by its own count in July 2024.

    Lessonwhen a device changes shape, one etch step can set the pace for a whole product line.

    engadget.comsemiengineering.comnewsroom.lamresearch.com

    Credit

    Samsung Electronics; etch toolmakers including Lam Research

Watch for

  1. Cryogenic etch in volume

    Cryogenic etch chills the wafer far below room temperature, reported at minus 60 to 70 °C, so deep holes etch faster and straighter. Tokyo Electron (TEL) said in 2023 that its process etches a 10 µm-deep memory hole in 33 minutes, and in October 2025 that its cryogenic etcher will go into high-volume lines as customers start making 400-layer memory; Lam says it put the first cryogenic etch into volume production in 2019. Outside reports show the step is hard: in June 2025 Samsung was reported to have asked Lam and TEL to raise the temperature slightly, and in June 2026 TrendForce said Samsung was "in the final stage of selecting equipment suppliers".

    Achieved whena memory maker or a teardown confirms TEL's cryogenic etchers making channel holes for a product in mass production.

    tel.comtel.comsmbom.comtrendforce.com

    Claimed by

    Tokyo Electron, October 2025 and July 2026

  2. AMEC's 90:1 memory etcher

    The Chinese toolmaker AMEC launched the Primo XD-RIE for 3D memory, aimed at aspect ratios of 70:1 to 90:1, using very-high-frequency radio power to keep the etch selective. TrendForce's report does not say whether it is in production.

    Achieved whena memory maker confirms production use, or an outside cross-section shows holes at those ratios.

    trendforce.com

    Claimed by

    AMEC, September 2026

  3. Dry molybdenum etch for memory

    Applied's Producer Selectra Mo Etch removes molybdenum selectively to separate the word lines in 3D memory, the metal wires that select the cells in each layer, replacing a wet chemical step. Applied names no customer and gives no figures.

    Achieved whena named chipmaker or a teardown confirms it in production.

    siliconsemiconductor.net

    Claimed by

    Applied Materials, June 2026

Open

  1. 01

    Open etch-recipe game

    An open version of the "virtual process game" that Lam Research used in a 2023 Nature paper to compare how people and algorithms develop an etch recipe. Wrap a simulation of a silicon hole etch as a black box with hidden settings, publish a target hole shape, charge each attempt at Lam's rates ($1,000 per recipe plus $1,000 per batch, standing for wafer and measurement costs), and let people, Bayesian optimisers (programs that pick each next trial from the results so far) and AI agents compete, with a public tally of money spent to reach the target.

    The brief
    Credit · unclaimed
  2. 02

    Bosch etch prediction leaderboard

    Virtual metrology means predicting a wafer's measurements from the machine's own sensor data instead of measuring every wafer. Build a fixed benchmark on a public dataset of Bosch etch runs: the inputs are the plasma's light spectrum and 31 machine parameters logged during each run, and the task is to predict post-etch step heights at 89 points on the wafer, training on earlier days and testing on later ones so that drift in the chamber counts.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open etch-recipe game

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open version of the "virtual process game" that Lam Research used in a 2023 Nature paper to compare how people and algorithms develop an etch recipe. Wrap a simulation of a silicon hole etch as a black box with hidden settings, publish a target hole shape, charge each attempt at Lam's rates ($1,000 per recipe plus $1,000 per batch, standing for wafer and measurement costs), and let people, Bayesian optimisers (programs that pick each next trial from the results so far) and AI agents compete, with a public tally of money spent to reach the target.

Why it is still open

Lam's study used its own "proprietary feature profile simulator" and found that an expert followed by an algorithm could cut the cost of reaching the target by half compared with experts alone, but nobody outside Lam can rerun it. The nearest open work, a Lawrence Berkeley National Laboratory digital-twin framework shown in February 2026, models whole reactors and has no leaderboard.

pmc.ncbi.nlm.nih.govhpc4energyinnovation.llnl.gov

Built with what exists

ViennaPS, an open-source process simulator with Python bindings and an SF6/O2 hole-etch example; a Bayesian optimisation library such as optimas; a coding agent such as Claude Code for the agent players; a GitHub repository for scored run logs.

  1. First step

    Turn the ViennaPS SF6/O2 hole-etch example into one Python function that takes a recipe and returns depth, top and bottom width, bowing and remaining mask, and time one run.

  2. Done looks like

    a frozen simulator version and target are published; at least three kinds of player (human, Bayesian optimiser, AI agent) each run at least 10 times; the median cost to reach the target and the success rate are posted; any logged run gives the same cost when rerun from its seed.

Open 02 · the brief

Bosch etch prediction leaderboard

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Virtual metrology means predicting a wafer's measurements from the machine's own sensor data instead of measuring every wafer. Build a fixed benchmark on a public dataset of Bosch etch runs: the inputs are the plasma's light spectrum and 31 machine parameters logged during each run, and the task is to predict post-etch step heights at 89 points on the wafer, training on earlier days and testing on later ones so that drift in the chamber counts.

Why it is still open

Researchers at Chemnitz University of Technology and the Fraunhofer Institute for Electronic Nano Systems published the dataset in September 2025 under CC BY 4.0, as "a resource for both machine learning engineers and process experts", in 10 daily files; the record lists no benchmark split, baseline model or leaderboard.

zenodo.org

Built with what exists

the Zenodo data; Python with scikit-learn (for example partial least squares and gradient boosting); a GitHub repository with a scoring script.

  1. First step

    Download the 10 daily files, count the runs that have both spectra and post-etch measurements, and publish the count.

  2. Done looks like

    a frozen split and error measures (error in nm and R²) are published with baseline scores, and at least three outside submissions are scored by the same script.