BRENNEN

Industries / Industrial equipment and services / Industrial services / Scaffolding

Building and dismantling

Building and dismantling is the hands-on work of putting a scaffold up from its parts, altering it, and taking it down again, including getting the parts to the level where they are needed.

5

Milestones achieved, from 1918 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1918

    Steel tubes replace rope

    Before the early 1900s scaffolds were mostly poles of timber or bamboo tied with rope. Daniel Palmer-Jones, whose business its successor dates to 1905, brought in a "Scaffixer" coupling to replace rope fixings in 1909 and the "Universal Coupler" in 1918, which his company's successor says marked the move from timber and rope to steel tubes and couplers. Scaffmag's history says the coupler became a standard pattern still used today.

    beis.comscaffmag.com

    Credit

    Daniel Palmer-Jones, with his brother David

  2. 1976

    Cups and wedges, not clamps

    SGB (Scaffolding Great Britain) introduced Cuplok, a system scaffold, meaning one built from factory-made uprights and horizontals that join at set points instead of tubes clamped wherever a fitting is placed. Its joint is a cup-and-blade connection, and Scaffmag calls it one of the most widely adopted proprietary scaffold systems in the world. Germany's Layher had launched its Allround system in 1974, with bolt-free wedge joints that take up to eight connections at one level.

    beis.comscaffmag.comlayher.com

    Credit

    SGB; Layher for Allround

  3. 1997

    Protection for the erectors

    From 2 September 1997, OSHA required US employers to have a competent person, meaning someone able to spot hazards and authorized to correct them, decide whether fall protection and safe access were feasible for workers erecting or dismantling supported scaffolds, and to provide them wherever they were. In its 1996 notice OSHA cited accident reports showing that 10 to 20% of scaffold deaths and injuries happen during erection and dismantling, and NIOSH's finding that erectors die at a higher rate than construction workers overall.

    federalregister.gov

    Credit

    OSHA, using evidence from NIOSH, the US National Institute for Occupational Safety and Health

  4. 2021

    A robot carries the parts

    Kewazo, a German company, put Liftbot to work in 2021: a robotic hoist that carries scaffold parts up the scaffold, work otherwise done by hand. About a dozen were working in Europe by January 2023, for customers including Bilfinger and Altrad, and a Southampton contractor, Skill Scaffolding, used one on a system scaffold at Poole Quay in 2022. Trade press reported labor savings of up to 70% without saying who measured them.

    scaffmag.comscaffmag.com

    Credit

    Kewazo

  5. 2025

    Hong Kong turns to metal

    In a memo of 17 March 2025, Hong Kong's Development Bureau required metal scaffolds on at least half of new public building contracts tendered from 21 March 2025. The memo said bamboo, the city's traditional scaffold, varies in strength, deteriorates over time and burns easily. In July 2025 the government told the Legislative Council that only one or two projects would be affected that year, that metal scaffolds cost about 2% of a contract sum against about 1% for bamboo, and that it had no plan to ban bamboo.

    devb.gov.hkinfo.gov.hk

    Credit

    Hong Kong Development Bureau

Watch for

  1. Hong Kong's metal roadmap

    After the fire at Wang Fuk Court in November 2025, Hong Kong's Secretary for Development said the government would draw up a roadmap to switch to metal scaffolds as soon as possible where site conditions suit, starting with work such as new buildings and maintenance of buildings on wider streets. Industry groups agreed to an action plan that is not one-size-fits-all. The plan must allow for the number of bamboo scaffolders, a steady supply of metal scaffolds, and space to move and store them.

    Achieved whenthe roadmap is published with dated targets and official figures show the named kinds of project using metal scaffolds.

    info.gov.hkthestandard.com.hk

    Claimed by

    Hong Kong Development Bureau, November 2025

Open

  1. 01

    A robot drives the wedge

    A robot arm on a ground-level test frame that fits horizontal ledgers into the connection points of system-scaffold uprights and drives each locking wedge home, with a camera checking that every joint is seated. Every joint sits within reach of the ground, and the arm works inside a fenced robot cell.

    The brief
    Credit · unclaimed
  2. 02

    Time the build on video

    An open set of labeled videos of scaffolds being erected and dismantled, filmed from fixed cameras on the ground, and a model that counts completed bays and lifts per crew-hour, so that build rates for different scaffold types can be compared with measured numbers.

    The brief
    Credit · unclaimed

Open 01 · the brief

A robot drives the wedge

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot arm on a ground-level test frame that fits horizontal ledgers into the connection points of system-scaffold uprights and drives each locking wedge home, with a camera checking that every joint is seated. Every joint sits within reach of the ground, and the arm works inside a fenced robot cell.

Why it is still open

PERI's Genio robot, built with the University of Southern Denmark and partners, assembles PERI UP scaffolds from a digital plan, but by July 2025 it had been tested only in closed, controlled settings, with no success rates published. Kewazo's Liftbot only carries parts. A 2018 conference paper by Follini and colleagues designed a gripper for Kewazo's earlier climbing robot modules and validated it by static analysis and a working prototype, without a count of scaffold joints made. Searches of papers and patents found no published tally of robot-made scaffold joints.

via.ritzau.dkscaffmag.comrepository.tudelft.nl

Built with what exists

A collaborative robot arm such as a Universal Robots UR10e; an electric or pneumatic hammer end tool; a camera; hired system-scaffold parts; NVIDIA's open GR00T 2 model or Hugging Face's LeRobot software, trained from a few demonstrations (see the Notes "Five demonstrations per task" and "No download").

  1. First step

    Hire one bay of system-scaffold parts, set up a ground-level frame, and film a scaffolder making 50 connections to set the human baseline.

  2. Done looks like

    200 filmed connections; each wedge checked by an experienced scaffolder for a seated joint; the success rate and time per connection published with all videos, next to the same scaffolder's time on the same frame.

Open 02 · the brief

Time the build on video

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open set of labeled videos of scaffolds being erected and dismantled, filmed from fixed cameras on the ground, and a model that counts completed bays and lifts per crew-hour, so that build rates for different scaffold types can be compared with measured numbers.

Why it is still open

Ying and colleagues at Curtin University classified scaffolding activities from 2D video in one 2021 case study, and no public dataset from that work was found. Bangaru and colleagues (2021) recognized 15 scaffold-building activities with 94% accuracy from armband sensors worn by the workers, not from cameras, and counted no completed bays. Kewazo's analytics report site activity only from its own hoist. In Hong Kong's bamboo-versus-metal debate the government gives cost shares (about 2% of a contract sum for metal, 1% for bamboo) but no measured build times.

api.crossref.orgrepository.lsu.eduinfo.gov.hk

Built with what exists

Phone or site cameras on tripods; CVAT, an open-source labeling tool; Ultralytics YOLO object detection models; written consent from each crew filmed.

  1. First step

    Agree with one scaffold contractor to film one job from the ground, with the crew's written consent, and count the bays by hand.

  2. Done looks like

    40 hours of labeled video from at least five sites, released under an open license; the model's bay counts within 10% of hand counts; a published table of erection and dismantling rates for at least two scaffold types.