BRENNEN

Industries / Technology / Telecommunications / Satellite internet

User terminals

A user terminal is the dish or flat panel at the customer's site that points at the satellites, with the modem and router behind it.

6

Milestones achieved, from 1997 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1997

    Dish down, phone up

    In August 1997 a review described Hughes' DirecPC as a $500 package of a PC interface card and a 21-inch dish for home installation; only downloads came by satellite, and users paid for a separate internet link to send their requests. Monthly fees ran up to $130 for unlimited use, with per-megabyte fees on other plans. In 1994 Hughes had priced the receive-only kit at $1,495.

    route-fifty.comwashingtontechnology.com

    Credit

    Hughes Network Systems

  2. 2017

    Flat antennas steered by software

    On 7 March 2017 Kymeta began taking orders for its mTenna u7, a flat Ku-band antenna built from metamaterials (engineered surfaces that shape radio waves) and steered electronically instead of by motors, with commercial trials from May. Kymeta called it "the world's first, electronically scanned satellite antenna that can be used extensively across mobile and fixed platforms," its own claim.

    prnewswire.com

    Credit

    Kymeta

  3. 2021

    Phased arrays at half cost

    A phased array is a flat panel of many small antennas whose signals are timed so the beam steers with no moving parts. SpaceX President Gwynne Shotwell said on 6 April 2021 that Starlink's terminals cost $3,000 each to make when beta testing began in October 2020 and that the cost had fallen below $1,500. Customers paid $499 for the kit.

    spaceintelreport.comcnbc.com

    Credit

    SpaceX

  4. 2022

    A regulator measures the dish

    In February 2022 France's radio regulator, ANFR, measured the radio field around a transmitting Starlink kit at 50 cm, 1 m and 2 m. The highest reading was 8.98 V/m, 1 m in front of the antenna, against a public exposure limit of 61 V/m in that band. ANFR found that an obstacle in the beam, even one as thin as its probe's tripod, cut both the link and the emission.

    anfr.fr

    Credit

    ANFR

  5. 2022

    A dish opened by glitching

    At Black Hat in Las Vegas in August 2022, Lennert Wouters showed that disturbing a Starlink terminal's supply voltage while its built-in boot code ran let him skip the check of signed firmware and run his own code. He moved the attack onto a cheap add-on board and published the design on GitHub under KU Leuven's COSIC group; Starlink offered rewards of up to $25,000 for bug reports.

    LessonAnyone can buy a terminal and open it, so its security has to hold against attackers with the hardware in hand.

    theregister.com

    Credit

    Lennert Wouters, KU Leuven (COSIC)

  6. 2025

    Running on a power bank

    Martin Sauter measured a Starlink Mini drawing about 21 W on average, with 40 W and higher peaks only for a minute or two after power-on, and ran it for 2 hours 45 minutes from a 100 W, 72 Wh power bank; a 60 W bank left it stuck restarting.

    blog.wirelessmoves.com

    Credit

    SpaceX (Starlink Mini); measurement by Martin Sauter

Watch for

  1. Gigabit flat panels

    Amazon says its Leo Ultra, a full-duplex phased array that sends and receives at once, gives up to 1 Gbps down and 400 Mbps up and is "the fastest commercial phased array antenna in production." It began an enterprise preview on 24 November 2025 with customers including JetBlue, ahead of a wider rollout planned for 2026.

    Achieved whenan outside tester publishes measured speeds from Leo Ultra terminals in paid, routine service.

    aboutamazon.com

    Claimed by

    Amazon, November 2025

Open

  1. 01

    One power test for all

    A published test method, and a results table, for the power each satellite terminal draws asleep, idle, under a steady download, under heavy upload and while melting snow, measured the same way for every model.

    The brief
    Credit · unclaimed
  2. 02

    Exposure checks for new terminals

    A repeat of ANFR's 2022 field measurement for terminals sold since then, at the same distances and heights, with results set beside the public limits.

    The brief
    Credit · unclaimed

Open 01 · the brief

One power test for all

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published test method, and a results table, for the power each satellite terminal draws asleep, idle, under a steady download, under heavy upload and while melting snow, measured the same way for every model.

Why it is still open

Figures come from makers' ranges or one-off tests. Sauter tested one Starlink Mini, and Dominic Laniewski and colleagues at Osnabrück University logged a Starlink Flat High Performance dish on a car and found its draw followed its heater more than the car's speed. A search found no common test across makers, and no published measurement of Amazon Leo's terminals.

blog.wirelessmoves.comdl.ifip.org

Built with what exists

A logging bench power supply or USB-C power meter; a plug-in energy logger for mains-powered kits; a freezer box for cold tests; iperf3 to set steady loads; a spreadsheet of watts and watt-hours per gigabyte.

  1. First step

    Write down the five test states and log one Starlink Mini through all of them over a day.

  2. Done looks like

    At least five terminal models, including two from Starlink and one each from Eutelsat OneWeb and a geostationary provider, each tested three times in every state, with method, raw logs and results public, and a second lab reproducing one model within 10%.

Open 02 · the brief

Exposure checks for new terminals

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A repeat of ANFR's 2022 field measurement for terminals sold since then, at the same distances and heights, with results set beside the public limits.

Why it is still open

ANFR measured one Starlink kit in February 2022. A search found no independent measurement of later terminals such as the Starlink Mini or Amazon Leo's panels.

anfr.fr

Built with what exists

A broadband isotropic field probe rated to at least 30 GHz and calibrated to ISO 17025, as ANFR's was; ANFR's grid of points at 50 cm, 1 m and 2 m; iperf3 to keep each terminal transmitting at full load.

  1. First step

    Reproduce ANFR's grid on one Starlink Standard dish and check that the readings fall in the range of ANFR's 8.98 V/m maximum.

  2. Done looks like

    Four terminal models measured on ANFR's grid, each with its highest field in V/m beside the limit, method and raw readings public, and one model also measured by a second team.