BRENNEN

Industries / Construction and property / Commercial and residential construction / Roofing

Measuring and estimating

Measuring a roof means finding its area, its pitch (slope) and the lengths of its edges, counted in squares of 100 sq ft (9.3 m²), and estimating turns those numbers into a list of materials and labor with a price.

6

Milestones achieved, from 1880 to 2019.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1880

    The square sets the pitch

    Fred T. Hodgson's handbook The Carpenters' Steel Square and Its Uses (1880) shows how to find the length and end cuts of common and hip rafters by laying an L-shaped steel square on the timber. It describes a roof's slope by the "number of inches of rise to the foot" of level run, and also by older names such as "quarter pitch" and "third pitch", where the ridge stands a quarter or a third of the building's width above the walls. Roofers still state pitch in inches of rise per foot: a 2025 aerial roof report filed in a public housing authority's bid package says its "Pitch values are shown in inches per foot", such as 9/12.

    archive.orgrochesterhousing.org

    Credit

    Fred T. Hodgson

  2. 1916

    Measure your own roof

    Sears, Roebuck and Co. sold roofing by mail, and its 1916 roofing catalog told buyers "How to measure any kind of roof": multiply the length of the roof by the length of the rafters, and double the result for a gable roof with two sides. Roofing was priced per square of 100 sq ft. Each roll of Sears roll roofing held 108 sq ft to cover 100 sq ft, the extra 8 sq ft going into the overlapping joints, and the catalog reckoned about 900 wood shingles, each showing 4½ in to the weather, to cover a square. "It is better to have a roll too much than be half a roll short," it advised.

    archive.org

    Credit

    Sears, Roebuck and Co

  3. 2006

    A price list for repairs

    Xactimate is estimating software in which an insurance adjuster or a contractor sketches a roof from their own measurements and the program works out the materials, labor and price from a price list. Verisk Analytics, an insurance data company, bought its maker, Xactware Solutions, in 2006. By Verisk's annual report for 2021, the price lists covered 468 economic areas in North America, held about 21,000 unit-cost line items, were revised monthly and as often as weekly after major disasters, and were built from market surveys and customers' claims. Verisk estimated that more than 80% of US and Canadian insurance repair contractors who estimate by computer used its pricing data.

    sec.gov

    Credit

    Xactware Solutions; Verisk Analytics

  4. 2008

    Roofs measured from the air

    EagleView Technologies, founded in Bothell, Washington, in 2008, sells roof reports measured from aerial photographs instead of by a climb with a tape: total area, the pitch of each facet, and the lengths of ridges, hips, valleys, rakes and eaves. In 2013 it merged with Pictometry International of Rochester, New York, founded in 2000, which flies cameras that photograph buildings at an angle (oblique imagery) as well as straight down. In a January 2019 ruling quoted by EagleView, the federal court in New Jersey described its patents, which name founder Chris Pershing as inventor, as solving "the specific problem of generating a roof repair estimate without direct human measurement of a roof". Such reports are now routine paperwork: the Rochester Housing Authority's 2025 re-roofing bid package includes an EagleView report for each building.

    eagleview.comeagleview.comrochesterhousing.org

    Credit

    Chris Pershing and EagleView Technologies; Pictometry International

  5. 2014

    Regulators block a merger

    In January 2014 Verisk agreed to buy EagleView, which had combined with Pictometry the year before, for about $650 million in cash. Verisk said the combined company's image library covered more than 85% of the US population and about 90% of US structures. In December 2014 the two companies called the deal off after the US Federal Trade Commission (FTC) voted to challenge it.

    sec.govsec.gov

    Credit

    US Federal Trade Commission; Verisk; EagleView

  6. 2019

    A verdict over roof reports

    EagleView and Pictometry sued Xactware and Verisk in September 2015, saying that Verisk's aerial roof products, used with Xactimate, infringed their patents. On 25 September 2019, after a 12-day trial, a federal jury in New Jersey found that Xactware and Verisk had willfully infringed six patent claims and awarded $125 million. The court then barred Verisk from selling the products with Xactimate, and in February 2021 it trebled the award to $375 million. The parties settled the whole case in November 2021, while Verisk's appeal was pending, and the court dissolved the ban.

    LessonA patent on measuring roofs from aerial photos barred the maker of the leading claims estimating software from selling its own aerial roof measurements with it for about two years.

    sec.goveagleview.com

    Credit

    EagleView and Pictometry; US District Court for the District of New Jersey

Watch for

  1. A tape check of reports

    Nearmap says Haag Engineering, a forensic engineering firm, compared tape measurements of 39 roofs across the US with Nearmap's measurements from aerial imagery and 3D models, and found Nearmap's roof areas 98.4% accurate, with a largest difference of 2.2%. Nearmap also says its reports now run inside Verisk's Xactimate and XactAnalysis.

    Achieved whenHaag's report is published with the figures for each roof, or another party repeats the comparison and publishes its data.

    nearmap.com

    Claimed by

    Nearmap, June 2026

  2. Walls measured from the air

    EagleView says its 3D property models in EagleView One now measure walls, windows and doors as well as roofs, with "98.77% accuracy", from very high-resolution straight-down and oblique aerial photos, and that this "reduces or even eliminates the need for site visits". The launch announcement does not say how the figure was measured or against what.

    Achieved whenan outside party publishes a comparison of these measurements with hand measurements of the same buildings.

    roofingcontractor.com

    Claimed by

    EagleView, March 2026

Open

  1. 01

    An answer key for reports

    A public set of at least 50 buildings whose roof area, pitch and edge lengths are known from construction drawings, and a scorecard of how close paid aerial reports, free tools and open laser scans (LiDAR) come to them. The drawings come from bid packages that housing authorities, school districts and cities post for re-roofing and new buildings, so nobody climbs a roof.

    The brief
    Credit · unclaimed
  2. 02

    Waste measured on real jobs

    A public table of how much more shingle material finished jobs actually used than the measured roof area, built from records: the measured area, bundles delivered, bundles returned, and the roof's number of facets, hips and valleys. Fit how waste grows with the roof's complexity, and compare the result with the waste factors that measurement reports suggest.

    The brief
    Credit · unclaimed

Open 01 · the brief

An answer key for reports

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of at least 50 buildings whose roof area, pitch and edge lengths are known from construction drawings, and a scorecard of how close paid aerial reports, free tools and open laser scans (LiDAR) come to them. The drawings come from bid packages that housing authorities, school districts and cities post for re-roofing and new buildings, so nobody climbs a roof.

Why it is still open

The accuracy tests found are known only from summaries. Haag Engineering's check of Kespry's drone measurements against hand surveys of 13 roofs in the Dallas–Fort Worth area was reported in Geo Week News in 2018, and its check of Nearmap's measurements on 39 roofs comes from Nearmap's 2026 press release. Neither released roof-by-roof data, and neither compared several services on the same roofs. GitHub searches for "roof measurement" and "roof pitch" in November 2026 found dozens of calculators and report-sellers' pages but no shared test set. Public bid packages already hold the inputs: the Rochester Housing Authority's 2025 package includes EagleView reports for each building.

geoweeknews.comnearmap.comrochesterhousing.org

Built with what exists

Public bid packages with dimensioned roof plans; Google's Solar API, which returns roof segments with their pitch and area for many buildings; US Geological Survey 3DEP airborne LiDAR read with the open-source PDAL library and QGIS; two or three paid aerial reports per building; an AI model that reads drawing sheets and report PDFs to pull out dimensions, checked by a person (see the Note "The jobs agents repeat").

  1. First step

    Collect 20 public re-roofing or new-roof bid packages that include dimensioned roof plans, and compute the roof area of five by hand.

  2. Done looks like

    At least 50 buildings with drawing-based answers, a second person re-deriving the answers for 10 of them; for each building and each method, the error in roof area (percent), predominant pitch (inches per foot) and total ridge, hip and valley length; all data and code published under an open license.

Open 02 · the brief

Waste measured on real jobs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of how much more shingle material finished jobs actually used than the measured roof area, built from records: the measured area, bundles delivered, bundles returned, and the roof's number of facets, hips and valleys. Fit how waste grows with the roof's complexity, and compare the result with the waste factors that measurement reports suggest.

Why it is still open

Waste is set by rule of thumb. Roofr's estimating guide calls 10% to 15% "a solid roofing waste factor estimate". An EagleView report prints the roof area at waste factors from 0% to 28% for the contractor to choose from, and says "actual waste percentages may differ based upon several variables that EagleView does not control". A search in November 2026 found guides and calculators but no published measurements of shingle waste on finished jobs.

roofr.comrochesterhousing.org

Built with what exists

Supplier invoices and return slips; the measurement report already bought for each job; a spreadsheet; an AI model that reads invoices and reports into a table (see the Note "The jobs agents repeat"); Python with statsmodels for the fit.

  1. First step

    Ask three roofing contractors for the invoices, return slips and measurement reports of 20 finished jobs each.

  2. Done looks like

    100 completed jobs from at least five contractors, published with addresses removed; a fitted relation between waste and the number of valleys, hips and facets, with error bands; and the share of jobs where the report's suggested waste factor was too high or too low, and by how much.