Industries / Mining and materials / Glass and ceramics / Refractories
Raw materials
Raw materials work mines the minerals that refractories are made from, such as magnesite, bauxite, chrome ore and graphite, or makes them from seawater, brine or refined chemicals, and fires or melts them into hard, dense grain that brickmakers crush, size and mix.
7
Milestones achieved, from 1881 to 2017.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1881
A works built on magnesite
Magnesite (magnesium carbonate) is burned at high heat into magnesia (magnesium oxide), the grain behind most linings that face steelmaking slag. Bricks of burned magnesite from Kraubath had lined puddling furnaces at Donawitz in Austria before 1857, but Carl Spaeter, an industrialist from Koblenz, built what Gerald Buchebner, writing in the Leoben mining-history journal res montanarum in 2018, calls the world's first magnesite works, at Veitsch in Styria on a deposit found in 1881, to supply the new basic steel furnaces. Its director Josef Hörhager and the Breslau kiln builder Lezius designed a shaft kiln that reached the 1,600 °C needed to sinter the stone, and by 1903 Veitsch made 75,000 t of magnesite bricks a year, 35,000 t of them for the United States. In 1912 the new works at Radenthein in Carinthia lit what Buchebner calls the first rotary kiln for raw magnesite.
Credit
Carl Spaeter; Josef Hörhager; Lezius of Breslau
1934
Alumina made, not mined
Tabular alumina is a synthetic grain made by sintering refined alumina (aluminum oxide), used in high-performance refractories where natural minerals are too impure. Almatis, the company that took over Alcoa's specialty alumina business in 2004, says Thomas S. Curtis made the first tabular alumina in 1934 under contract to Alcoa, that the product and process were reworked from 1935 to 1956, and that Alcoa opened its first specialty alumina plant at Bauxite, Arkansas, in 1952 and a tabular alumina plant at Rotterdam in 1968.
Credit
Thomas S. Curtis; Alcoa
1937
Magnesia from seawater
Seawater holds dissolved magnesium that can be settled out as magnesium hydroxide by adding lime or burned dolomite, then calcined and sintered into magnesia. The Steetley company set up a subsidiary in 1937 to run a seawater magnesia plant at Hartlepool on England's northeast coast, by Grace's Guide's account, and emerged from the Second World War as a leading maker of dolomite and magnesia refractories. Buchebner gives the recipe: about 400 m³ of seawater, 22 m³ of fresh water and 2.7 t of dolomite for each tonne of magnesia. By the US Geological Survey's count, the United States, the Netherlands, Japan and Norway held 65% of the world's capacity to make magnesia from seawater or brine at the end of 2018.
Credit
The Steetley Company
1960s
Alpine magnesite falls short
Austria's iron-rich magnesite, with 4 to 8.5% iron oxide, served steelmakers well into the 1950s. As deposits worsened and steelworks demanded longer-lasting linings, Austrian producers built flotation and heavy-media plants at Trieben and Radenthein to strip out silica and lime, but from the early 1960s the most demanding linings switched to low-iron sintered magnesia from Turkey and Greece, with about 0.2% iron oxide. High-field magnetic separators and optical sorters were added to remove serpentine from the stone, yet Buchebner reported in 2018 that low-iron raw magnesite is still mostly sorted by hand, by its look.
LessonA deposit good enough for one generation of furnaces can fall short of the next, and the supply moves to purer stone elsewhere.
Credit
Austrian magnesite producers at Trieben and Radenthein; Turkish and Greek magnesite miners
2012
Export quotas lose at WTO
In 2009 the United States, the European Union and Mexico challenged China's export duties and quotas on raw materials including bauxite, magnesium, silicon carbide and fluorspar. A World Trade Organization panel found against China in July 2011, and the Appellate Body upheld most of the ruling in January 2012, including the finding that China's quota on refractory-grade bauxite was not a temporary measure to relieve a critical shortage. The reports were adopted on 22 February 2012, and China told the WTO that it had removed the duties and quotas from 1 January 2013.
LessonThe ruling removed the quotas but not the reliance: in 2018 China still supplied 66% of US imports of dead-burned and fused magnesia, by the USGS count.
Credit
the United States, the European Union and Mexico as complainants; the WTO panel and Appellate Body
2014
Magnesite listed as critical
The European Commission keeps a list of critical raw materials, those both important to the economy and at risk of running short. Its 2014 list added magnesite and chromium, the bases of magnesia and magnesia-chrome refractories, at a time when China produced 69% of the world's magnesite, Turkey supplied 91% of the EU's imports of it, and recycled products met none of the EU's demand (an end-of-life recycling input rate of 0%). The 2017 review found magnesite, chromium and coking coal no longer critical, while bauxite was added in 2020.
Credit
European Commission
2017
Liaoning's magnesia shuts down
China's enforcement of environmental rules in 2017 temporarily closed 80% to 90% of the magnesia production capacity in the country's main magnesia-producing region, by the USGS account. Inspections went on through 2018, mainly in Liaoning province: by the third quarter nearly all of Liaoning's high-purity magnesia production had stopped, and the government of Haicheng took control of 42 magnesia companies and merged them into the Liaoning Magnesite Mining Company. The export unit value of Chinese dead-burned magnesia (magnesia sintered into dense grain) rose 135% from the first half of 2017 to the first half of 2018, to US$430 a tonne. By then China also made 81% of the world's fused magnesia, melted in electric arc furnaces, by Buchebner's figures.
LessonWhen most of a mineral comes from one province, that province's environmental campaign sets world prices.
Credit
Government of China; reported by the US Geological Survey
Watch for
Kiln carbon bound into minerals
Burning magnesite or dolomite releases carbon dioxide from the stone itself, not only from the fuel. RHI Magnesita says it will capture about 50,000 t of CO2 a year at its Hochfilzen plant in Tyrol from 2028, using MCi Carbon's mineral carbonation, which binds CO2 into solid carbonates, and calls it the first carbon capture and utilization plant in the refractory industry; Austrian and Australian agencies granted €3.8 million. Australia's trade agency reported in July 2026 that MCi Carbon's Myrtle demonstration plant in Newcastle, New South Wales, had started production, and that RHI Magnesita, which invested US$10 million in MCi Carbon, would run the first customer campaign there in 2026. Hochfilzen reported 271,008 t of verified CO2 emissions under the EU Emissions Trading System for 2025.
Achieved whenthe Hochfilzen unit runs and the site's verified emissions, or an outside auditor's count of CO2 bound into products, show the captured tonnage.
globalcement.cominternational.austrade.gov.auclimate.ec.europa.eu
Claimed by
RHI Magnesita and MCi Carbon, January 2025, repeated by Austrade in July 2026
Open
01
Magnesia carbon, plant by plant
A public table giving, for each magnesia plant in the EU Emissions Trading System, its verified CO2 emissions for every year since 2013, its output of magnesia where any source gives it, and the resulting tonnes of CO2 per tonne of magnesia, set beside the chemistry: turning magnesite into magnesia releases about 1 t of CO2 per tonne before any fuel is burned.
The briefCredit · unclaimed02
Free monthly mineral prices
An open monthly series of export prices for refractory raw materials, computed as declared value divided by tonnage from customs records and split finely enough to separate grades. China's eight-digit customs codes already separate fused magnesia (25199010) from dead-burned magnesia (25199020); the series would add refractory bauxite, fused alumina, flake graphite and zircon from their main exporting countries.
The briefCredit · unclaimed
Open 01 · the brief
Magnesia carbon, plant by plant
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table giving, for each magnesia plant in the EU Emissions Trading System, its verified CO2 emissions for every year since 2013, its output of magnesia where any source gives it, and the resulting tonnes of CO2 per tonne of magnesia, set beside the chemistry: turning magnesite into magnesia releases about 1 t of CO2 per tonne before any fuel is burned.
Why it is still open
The EU's reference document for the sector, the 2013 best-available-techniques reference (BREF) for cement, lime and magnesium oxide, gives only ranges drawn from industry submissions of 2003 to 2008: about 1 t of process CO2 plus 0.4 to 1.3 t from fuel per tonne of sintered magnesia. The EU's verified-emissions file gives site totals without output: for 2025, Magnesitas Navarras reported 298,313 t, Veitsch-Radex Hochfilzen 271,008 t and SMZ Jelšava 138,233 t. Magnesia sites are also filed under three different activity codes (lime and magnesite calcination, ceramics, and fuel combustion). A 2009 master's thesis at Montanuniversität Leoben by Mathias Trojer found that the EU's usual benchmark, the average of the best 10% of plants, could not be applied to so few magnesia plants without exposing their data, and built its CO2 benchmark on a generic, theoretical kiln instead of plant figures. Searches in November 2026 found no public table that pairs plant emissions with output.
eippcb.jrc.ec.europa.euclimate.ec.europa.eupure.unileoben.ac.at
Built with what exists
The European Commission's yearly verified-emissions spreadsheets; company annual reports, plant permits under the EU Industrial Emissions Directive and USGS Minerals Yearbook country chapters for output and capacity; Python with pandas; an AI document reader to find tonnages in long reports, every figure checked by hand (see the Note "Seven more flagged").
First step
Search the 2025 verified-emissions file for operators that make magnesia (a name search finds about a dozen installations in Austria, Spain, Greece, the Netherlands and Slovakia) and look up each one's permitted capacity.
Done looks like
At least ten EU magnesia sites with emissions for 2013 to 2025, at least five of them with output for three or more years and a computed CO2 per tonne of magnesia, published with the method and a link for every number.
Open 02 · the brief
Free monthly mineral prices
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open monthly series of export prices for refractory raw materials, computed as declared value divided by tonnage from customs records and split finely enough to separate grades. China's eight-digit customs codes already separate fused magnesia (25199010) from dead-burned magnesia (25199020); the series would add refractory bauxite, fused alumina, flake graphite and zircon from their main exporting countries.
Why it is still open
Benchmark prices for these minerals are sold by subscription services. The USGS gives Chinese export unit values only by year or half-year (dead-burned magnesia averaged US$430 a tonne in the first half of 2018 and US$326 in the second); CEIC, a commercial data service, carries the monthly Chinese customs value of dead-burned magnesia exports; and the international six-digit code 251990, used by free trade portals, covers fused, dead-burned, light-burned and chemically pure magnesia together. A search in November 2026 found no free monthly series by grade.
Built with what exists
China Customs' online statistics query, the UN Comtrade API and Eurostat's Comext trade database; Python with pandas; a published note on method.
First step
Download China's monthly 2018 exports under codes 25199010 and 25199020 and check the half-year averages against the USGS's US$430 and US$326 a tonne.
Done looks like
Monthly unit values in US dollars per tonne from January 2015 for at least six materials, refreshed each month, with the 2018 half-year averages for Chinese dead-burned magnesia within 5% of the USGS figures.