BRENNEN

Industries / Mining and materials / Mining and quarrying / Rare earth processing

Magnets

Magnet making melts rare earth metals with iron or cobalt and small amounts of other elements, then mills the alloy to powder, presses it in a magnetic field, sinters it (heats it until the grains fuse) and magnetizes the result, to make the permanent magnets in motors, generators and electronics.

5

Milestones achieved, from 1967 to 2016.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1967

    Samarium and cobalt magnets

    In March 1967 researchers at the US Air Force Materials Laboratory in Dayton, Ohio, with one from General Electric, reported that compounds of cobalt with one rare earth atom to five of cobalt, such as SmCo5, strongly prefer to be magnetized along one axis, which makes them candidates for permanent magnets. SmCo5 powder that was merely ground reached an energy product of 5.1 MGOe (megagauss-oersteds, the standard measure of a magnet's strength for its size), and they estimated a possible upper limit of 18 to 31.3 MGOe. The Japan Prize Foundation calls samarium-cobalt the first rare earth magnet developed, refined in the 1970s, but notes that cobalt and samarium were scarce and costly.

    LessonA magnet built on scarce elements could not meet large demand, which sent researchers looking for one based on iron.

    api.crossref.orgjapanprize.jp

    Credit

    Karl Strnat, G. Hoffer, J. Olson, W. Ostertag (US Air Force Materials Laboratory) and J. J. Becker (General Electric)

  2. 1984

    Neodymium, iron and boron

    In 1982 Masato Sagawa found a compound of neodymium, iron and about 1% boron by weight, and with Sumitomo Special Metals turned it into sintered magnets, by the Japan Prize Foundation's account. Their 1984 paper reports a record energy product of 290 kJ/m³ (about 36 MGOe) and a Curie temperature, above which a magnet loses its magnetism, of 585 K. Working separately, a General Motors Research Laboratories team published magnets made from the same alloy cooled very fast from the melt, reaching 14 MGOe. By 2012 neodymium magnets of about 50 MGOe were in mass production, by the foundation's account.

    japanprize.jpapi.crossref.orgapi.crossref.org

    Credit

    Masato Sagawa and Sumitomo Special Metals; John Croat, J. F. Herbst, R. W. Lee and F. E. Pinkerton of GM

  3. 1995

    Magnequench leaves Indiana

    General Motors opened its Magnequench magnet factory in Anderson, Indiana, in 1986 and in 1995 sold the business for US$70 million to the Sextant Group and two Chinese state-linked companies, San Huan New Material High-Tech and China National Non-Ferrous Metals. A union official dated the transfer of the Anderson operation to China to 2001, and the Valparaiso, Indiana, plant was closing in early 2004, which In These Times reported as the end of US production of these magnets. Senator Evan Bayh had asked the government to block that move because the plant supplied 80% of the magnets for smart bombs.

    LessonThe Indiana workers trained the engineers and workers for the new plants in China, so selling a magnet business also moved the skills to make the magnets.

    wardsauto.cominthesetimes.com

    Credit

    General Motors; Magnequench and its buyers

  4. 2006

    Dysprosium kept to grain boundaries

    Dysprosium and terbium raise coercivity, a magnet's resistance to being demagnetized, which motors need when hot, but they are scarce. Shin-Etsu Chemical coated finished sintered magnets with dysprosium or terbium oxide or fluoride powder and heated them, so the heavy rare earth diffused in along the boundaries between grains and formed rich shells around them. With terbium fluoride, coercivity rose by more than 400 kA/m in magnets up to 3 mm thick, with little loss of remanence (the magnetization a magnet keeps). Sagawa's company Intermetallics developed a process that the Japan Prize Foundation says can cut dysprosium use to a half, and eventually a tenth, and Japan's National Institute for Materials Science and Daido Steel published further work on the method in 2023.

    LessonPutting a scarce element only where it is needed cuts how much is used.

    api.openalex.orgapi.openalex.orgjapanprize.jp

    Credit

    K. Hirota, Hajime Nakamura, Takehisa Minowa and M. Honshima, Shin-Etsu Chemical

  5. 2016

    Hybrid motor without dysprosium

    Daido Steel and Honda put into a hybrid car's drive motor a neodymium magnet with no heavy rare earth at all. It is hot-deformed, pressed into shape while hot, which gives crystal grains about ten times smaller than in a sintered magnet and so more heat resistance; Honda reshaped the rotor to suit it. Daido Electronics was to begin mass production in August 2016 at Nakatsugawa, Gifu, for the all-new Honda Freed, from magnet powder bought from Magnequench. A report of Japan's science ministry's Element Strategy Initiative, written by a Daido Steel researcher, says the work reached mass production of hybrid cars that use no heavy rare earths, with magnets equal to sintered ones holding 4 to 5% dysprosium by weight.

    global.hondamext.go.jp

    Credit

    Daido Steel and Daido Electronics; Honda Motor

Watch for

  1. Sintered magnets made in Estonia

    Neo Performance Materials opened a €96 million magnet factory in Narva, Estonia, on 19 September 2025, with a capacity of 2,000 t a year that could grow to 5,000 t; Estonia's public broadcaster noted that 90% of such magnets had been made in China. In September 2026 Neo said the plant was in commercial production, that its first commercial volumes had gone to a Tier 1 maker of electric-car traction motors, and that it expected two or three programs in commercial production by the end of 2026.

    Achieved whena named carmaker or motor maker confirms Narva magnets in series-production motors, or Neo's audited accounts give Narva's output in tonnes.

    news.err.eechargedevs.com

    Claimed by

    Neo Performance Materials, September 2026

  2. Texas magnets for GM

    MP Materials has made neodymium-iron-boron magnets at its Fort Worth plant since December 2025, according to its fourth-quarter 2025 earnings release as cited by 24/7 Wall St., and GM has tested them in prototype motors in Pontiac, Michigan. On MP's August 2026 earnings call its chief financial officer said regular production deliveries to GM should begin in the fourth quarter of 2026 at small volumes; reports in September disagreed on whether the first had already arrived.

    Achieved whenGM confirms MP magnets in the motors of vehicles built for sale, and MP reports delivered tonnage.

    gmauthority.com247wallst.com

    Claimed by

    MP Materials and General Motors, August and September 2026

Open

  1. 01

    Test magnets sold as N52

    A public test of neodymium magnets sold online as grade N52, the strongest common grade. Buy one small disc size from at least 20 sellers on several marketplaces, measure each magnet's remanence (the magnetization it keeps, Br) and its pull force, and compare them with N52's published minimum values.

    The brief
    Credit · unclaimed
  2. 02

    One open table of grades

    A free, machine-readable table of the sintered neodymium magnet grades that makers publish: remanence, coercivity, energy product, temperature coefficients and maximum working temperature, with the maker, grade name, source document and page for every row, and a column for whether the maker says the grade uses grain boundary diffusion or no heavy rare earths.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test magnets sold as N52

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of neodymium magnets sold online as grade N52, the strongest common grade. Buy one small disc size from at least 20 sellers on several marketplaces, measure each magnet's remanence (the magnetization it keeps, Br) and its pull force, and compare them with N52's published minimum values.

Why it is still open

Magnet Baron, a seller, writes that discs it ordered as N52 from marketplace sellers felt less than half as strong as they should, and that "there's often no verification behind that grade claim", but gives no instrument or sample size. Supermagnete, another seller, says some competitors overstate pull force by measuring it wrongly. A GitHub project classifies seven grades from microscope images of magnet surfaces, but its data are available only on request. Searches for this brief found no independent published tally.

themagnetbaron.comsupermagnete.ptgithub.com

Built with what exists

A Helmholtz coil and fluxmeter, which measure a magnet's total magnetic moment, sold by makers of magnetic test equipment such as Lake Shore Cryotronics and Magnet-Physik; calipers and a scale for each magnet's volume; a force gauge on a test stand, following the Magnet Distributors and Fabricators Association (MDFA) breakaway method that Supermagnete cites; the minimum values in published grade tables such as Arnold Magnetics'. Small magnets only, kept away from children.

  1. First step

    Buy five discs from a maker that supplies test certificates and five of the same size from the cheapest marketplace listing, and measure both sets.

  2. Done looks like

    At least 20 sellers with five magnets each, published with listing, price, measured Br and pull force, and a pass or fail against N52's minimum Br; a reference magnet with the maker's test certificate measured in every session as a check.

Open 02 · the brief

One open table of grades

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free, machine-readable table of the sintered neodymium magnet grades that makers publish: remanence, coercivity, energy product, temperature coefficients and maximum working temperature, with the maker, grade name, source document and page for every row, and a column for whether the maker says the grade uses grain boundary diffusion or no heavy rare earths.

Why it is still open

Makers publish their grades as PDF catalogs, such as Arnold Magnetics' table of typical and minimum values for each grade. The nearest open data found is a 2025 poster in Japan's NIMS materials data repository that measured three commercial grades, and searches of GitHub and the web found no combined table.

arnoldmagnetics.commdr.nims.go.jp

Built with what exists

Makers' public catalogs; pdfplumber or Camelot to read table text; an AI model built for pulling figures out of long documents, such as Muse Ember (see the Note "The jobs agents repeat"), with every value checked by a person against its page.

  1. First step

    Extract Arnold's basic grade table and one other maker's, and line up their N52 and 42SH rows.

  2. Done looks like

    At least 10 makers and 300 grade rows, every value linked to a page, a second person re-checking a random 10% of rows with no mismatches, and each source's terms of use recorded.