Industries / Transport and vehicles / Railcar manufacturing
Overhaul
Overhaul takes a locomotive or car apart at set intervals or in mid-life, repairs or replaces what has worn, and often rebuilds it to a newer standard.
5
Milestones achieved, from 1843 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1843
A works for repairs
The Great Western Railway's directors authorized a works at Swindon, England, on 25 February 1841, after the locomotive superintendent Daniel Gooch argued that the line needed a central repair depot, and it began work on 2 January 1843, by Grace's Guide's account. Its first building was a locomotive repair shed, staffed at first by about 200 men.
Credit
Daniel Gooch; Isambard Kingdom Brunel; the Great Western Railway
2015
Tank cars rebuilt after Lac-Mégantic
On 6 July 2013 an unattended train of 72 tank cars of crude oil ran away and derailed in Lac-Mégantic, Quebec, and 47 people died. Canada's Transportation Safety Board found that 59 of the 63 derailed tank cars were breached, and that their thin 7/16-inch shells without jackets gave too little protection. A US rule of May 2015 and the FAST Act of December 2015 set dates to retire older cars from flammable liquids or rebuild them as DOT-117Rs, which match the new DOT-117 design except that they may keep a 7/16-inch shell. By 2023, 67% of the tank cars carrying flammable liquids were new DOT-117s or rebuilt DOT-117Rs, and every car in that service met the phase-out deadlines, by the Bureau of Transportation Statistics' count.
LessonCars built to an old standard stay in service for decades unless a rule sets a date to rebuild or retire them.
Credit
Transportation Safety Board of Canada (investigation); PHMSA and Transport Canada (rules); tank car shops
2018
A diesel rebuilt as electric
India's Diesel Locomotive Works in Varanasi took a WDG3A diesel freight locomotive due for its mid-life overhaul, removed its Alco diesel engine, kept the frame, bogies and traction motors, and rebuilt it as an electric locomotive that draws power from overhead wires. Work began on 22 December 2017 and the first unit was ready for tests on 28 February 2018. Each rebuilt unit is rated at 5,000 hp, against 2,600 hp for the original. A railway ministry official told the news agency IANS that it entered service on 3 December 2018 and that the conversion cost about half of a mid-life rehabilitation, which he put at Rs 5 to 6 crore.
Credit
Diesel Locomotive Works, Varanasi, with engineers from RDSO, Chittaranjan Locomotive Works and Bharat Heavy Electricals
2023
Spare parts printed on demand
Deutsche Bahn began 3D printing spare parts in 2015, starting with simple pieces such as a plastic cover and a hook. In May 2023 it reported its 100,000th printed part, a gearbox housing for shunting locomotives whose delivery time fell from about ten months through the locomotive's maker to two months. By November 2025 it counted more than 200,000 printed parts in service, over 1,000 applications and savings of more than €20 million since 2015; these are DB's own figures, reported by the trade press. DB also started Mobility goes Additive, a network of more than 140 companies and universities, at the end of 2016.
Credit
Deutsche Bahn's 3D printing team, led by Stefanie Brickwede; Mobility goes Additive
2025
A thousand diesels modernized
In October 2025 Norfolk Southern completed its 1,000th conversion of an older diesel locomotive with DC traction motors to AC motors, at its Juniata shop in Altoona, Pennsylvania; Wabtec converts others at its plant in Erie, Pennsylvania. Crews strip each locomotive, install a new cab, engine, alternator and blowers, then paint and test it. Norfolk Southern says the rebuilt units are up to 25% more fuel efficient and 40% more reliable, can haul 55% more, and last at least 20 more years at half the cost of a new locomotive; those are its own figures.
Credit
Norfolk Southern; Wabtec
Watch for
Diesels rebuilt for hydrogen
CPKC, the Canadian Pacific Kansas City railway, rebuilds diesel locomotives to run on hydrogen fuel cells. Its CP 1200, a rebuilt AC4400CW with two Ballard fuel cell engines, entered mainline coal service out of Golden, British Columbia, in March 2025, and Ballard is to supply CPKC with 98 fuel cell engines, about 20 MW, over the next few years under a December 2024 agreement. No measured fuel use, cost or reliability from service has been published.
Achieved whenCPKC or an outside party publishes availability, hydrogen use and cost per ton-mile from regular service, compared with the diesels the rebuilt units replace.
Claimed by
Ballard Power Systems, April 2026; CPKC, March 2025
Open
01
Planning a wheel lathe cut
A public set of wheel profiles measured before and after turning on a depot wheel lathe, the machine that cuts a worn wheel back to shape without removing it from the train. Record the profile the operator chose and the diameter removed. Add an open program that proposes the cut that restores a legal flange with the least loss of diameter, and score it against the operators' choices.
The briefCredit · unclaimed02
Crack calls on bogie frames
A public set of photographs from magnetic particle tests on welded joints of retired bogie frames, each indication called a crack or not by a certified inspector, with a baseline detector scored against those calls. In this test the steel is magnetized and sprayed with fluorescent iron particles, which gather at cracks and glow under ultraviolet light. Work on frames at a scrap yard or museum, never on a vehicle in service.
The briefCredit · unclaimed
Open 01 · the brief
Planning a wheel lathe cut
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of wheel profiles measured before and after turning on a depot wheel lathe, the machine that cuts a worn wheel back to shape without removing it from the train. Record the profile the operator chose and the diameter removed. Add an open program that proposes the cut that restores a legal flange with the least loss of diameter, and score it against the operators' choices.
Why it is still open
Turning removes metal from a wheel's diameter. A 2019 University of Huddersfield study showed that "economic tyre turning", which leaves a thinner flange than the design profile, removes less material, and noted that Britain's railway standards did not then permit it. Work on turning strategy runs on measurements held by railways and researchers, such as the 586 profile files a KTH project evaluated for Swedish iron ore wagons. Searches of Zenodo and the web for this brief found public wheel photo sets, such as FaultSeg, but no public set of profiles measured before and after turning.
Built with what exists
A wheel profile gauge such as a MiniProf, or a low-cost laser line scanner; Python with NumPy and SciPy to fit and compare profiles; the depot's lathe records.
First step
Ask a tram depot or heritage railway that turns its own wheels to let you measure ten wheelsets before and after their next turning.
Done looks like
200 wheelsets measured before and after turning at one or more depots, published under an open license with the depots' permission, and a table comparing the program's proposed diameter loss with the operator's for each wheelset, every proposal checked against the flange limits.
Open 02 · the brief
Crack calls on bogie frames
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of photographs from magnetic particle tests on welded joints of retired bogie frames, each indication called a crack or not by a certified inspector, with a baseline detector scored against those calls. In this test the steel is magnetized and sprayed with fluorescent iron particles, which gather at cracks and glow under ultraviolet light. Work on frames at a scrap yard or museum, never on a vehicle in service.
Why it is still open
The Class 800 cracks were found on welded bolsters during scheduled maintenance. Automated reading of these tests exists for small parts: a 2024 study detected cracks in fluorescent images of train rivets, and Karl Deutsch sells CRACKVIEW AI, which photographs small production parts on a turntable and is trained for each customer on several thousand images. The public BogieSeg set (2026) holds trackside photos of moving bogies with a "crack / scratch" class, not test images. This research found no public set for welds on bogie frames.
Built with what exists
A handheld electromagnetic yoke, fluorescent magnetic ink and an ultraviolet lamp of the kind ISO 3059 specifies; a camera; CVAT, an open labeling tool; an open-source segmentation model such as U-Net; a certified magnetic particle inspector to make the calls.
First step
Ask a rolling stock scrap yard or railway museum for two retired bogie frames, and photograph tests on ten welds with an inspector.
Done looks like
2,000 photographed indications from at least 20 frames, each called by a certified inspector with a second inspector re-calling 10%, released under an open license, and a published table of the detector's hit rate and false alarms against those calls.