BRENNEN

Industries / Health / Medical devices / Prosthetics

Access

Access is the work of getting prostheses and braces to the people who need them: counting the need, training the people who make and fit devices, paying for them, and running services where few exist.

7

Milestones achieved, from 1969 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1969

    A foot for barefoot walkers

    The SACH foot needed a shoe and did not allow squatting or sitting cross-legged. In Jaipur, India, the surgeon P. K. Sethi and the craftsman Ram Chandra replaced its wooden keel with rubber and shaped the leg's shank from aluminium sheet with a hammer, so that a local smith could adjust it. Saha and Choudhari date the Jaipur Foot to 1969, and Sethi did not patent it, so anyone could make it.

    LessonSources disagree on durability: a 2018 study in Jaipur found no sudden breakages and called for standardized manufacture to lengthen the foot's life, while a 2020 analysis for ATscale cites studies of high failure rates and low durability.

    pmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govebi.ac.ukatscalepartnership.org

    Credit

    P. K. Sethi and Ram Chandra, Jaipur

  2. 1970

    A society for the trade

    The International Society for Prosthetics and Orthotics (ISPO) was founded in Copenhagen by surgeons, prosthetists, orthotists and engineers, with equal status for every profession. It began accrediting schools and training programmes in 2008 and published education standards for the prosthetics and orthotics occupations in 2018.

    ispoint.org

    Credit

    Knud Jansen and ISPO's founding members

  3. 1979

    Red Cross limb workshops

    The International Committee of the Red Cross (ICRC) set up its Physical Rehabilitation Programme for people disabled by war. It first imported materials and machinery, then developed its own polypropylene technology for cheaper prostheses and orthoses, which it says is now widely used. In Afghanistan in 2024 its centres made 4,253 prostheses and 29,780 orthoses, by its own count.

    LessonImported materials and machines gave way to a cheaper technology designed for the places the work was done.

    icrc.orgicrc.org

    Credit

    ICRC

  4. 1981

    A school for Africa

    The Tanzania Training Centre for Orthopaedic Technologists (TATCOT) opened in Moshi, with German technical cooperation, to train prosthetists and orthotists from English-speaking Africa. By December 2017 it had 752 graduates from 43 countries, by the Clinton Health Access Initiative's (CHAI) count, and its full prosthetist-orthotist degree cost USD 44,500.

    pmc.ncbi.nlm.nih.govatscalepartnership.org

    Credit

    TATCOT; German Technical Cooperation (now GIZ); Tanzania's Ministry of Health

  5. 2013

    Insurance pays for limbs

    The Philippine Health Insurance Corporation's Z-MORPH benefit package, launched in 2013, pays 15,000 pesos (about USD 300) for each lower-limb prosthesis, raised in 2016 to 75,000 pesos (about USD 1,500) for an above-knee one. CHAI reports that it followed ASCENT, a project begun in 2010 in which health workers registered amputees in remote islands by mobile phone.

    LessonCounting the people who needed limbs helped get limbs insured.

    atscalepartnership.org

    Credit

    Philippine Health Insurance Corporation (PhilHealth); the ASCENT project

  6. 2017

    Global standards for services

    WHO, with ISPO and the US Agency for International Development, published standards for prosthetics and orthotics services and a manual for putting them in place. They estimate that 0.5% of any population, 35 to 40 million people worldwide, need such services, and WHO says only 1 in 10 people who need assistive products have them. A year earlier WHO's list of 50 priority assistive products named lower-limb prostheses and leg, spine and arm orthoses, but not arm prostheses.

    who.intwho.int

    Credit

    WHO, ISPO and USAID

  7. 2025

    Limbs last about two years

    Using 27 years of clinic records from Exceed Worldwide's three clinics in Cambodia, 14,822 devices delivered to 6,986 people, a team from the University of Southampton and Exceed found that the median prosthesis went 237 days before its first repair and 727 days before it was replaced, and that children's and active workers' limbs were replaced sooner.

    LessonA limb is a service that has to be repeated for life; WHO's standards note that a child who loses a leg at ten is likely to need 25 to 30 prostheses.

    pmc.ncbi.nlm.nih.gov

    Credit

    Alex Dickinson and colleagues, University of Southampton; Exceed Worldwide

Watch for

  1. Ukraine's count of fitted limbs

    Ukraine's Minister of Social Policy, Denys Uliutin, said more than 44,000 people had received prostheses under the state programme since Russia's full-scale invasion, with the state paying the full cost, and said queues came less from a lack of money than from the need to train more specialists. The ministry reported 9,400 arm and leg prostheses issued in the first half of 2025. Protez Hub, a Ukrainian industry group, counted 34 certified prosthetist-orthotists in April 2025 against 300 it says the country will need by 2028.

    Achieved whenan outside body, such as WHO or an independent audit, publishes a count of devices delivered and still in use.

    euromaidanpress.commsp.gov.uaprotezhub.com

    Claimed by

    Ukraine's Ministry of Social Policy, May 2026

  2. Sports limbs in 28 states

    So Every BODY Can Move, a US advocacy coalition whose national legislative lead works at the clinic chain Hanger, aims to pass laws in 28 states by the 2028 Paralympics requiring insurers to cover activity-specific prostheses, such as running and swimming legs. New Hampshire's SB 408, signed in July 2026, extends the state's 2024 coverage for children to adults from 2028.

    Achieved when28 states have such laws in force.

    corporate.hanger.comlivingwithamplitude.com

    Claimed by

    So Every BODY Can Move, July 2026

Open

  1. 01

    Practice limbs for casting

    An open, low-cost practice limb on which student prosthetists can learn casting, the wrapping of plaster bandage around a residual limb to take its shape, without a patient. It is a below-knee limb of soft silicone over a printed bone core, its shape drawn in CAD rather than scanned from anyone, with thin pressure sensors under the places a caster must press or spare, such as the tendon below the kneecap, the head of the fibula and the shin bone, and a laptop display that logs where and how hard the caster pressed.

    The brief
    Credit · unclaimed
  2. 02

    Strength tests for local makers

    An open-hardware test machine with which a workshop that makes feet, sockets or pylons locally can run the static proof loads of ISO 10328, the international structural test for leg prostheses, and the heel-to-toe cyclic loading of ISO 22675 for feet, published with drawings, a parts list, calibration steps and software.

    The brief
    Credit · unclaimed

Open 01 · the brief

Practice limbs for casting

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, low-cost practice limb on which student prosthetists can learn casting, the wrapping of plaster bandage around a residual limb to take its shape, without a patient. It is a below-knee limb of soft silicone over a printed bone core, its shape drawn in CAD rather than scanned from anyone, with thin pressure sensors under the places a caster must press or spare, such as the tendon below the kneecap, the head of the fibula and the shin bone, and a laptop display that logs where and how hard the caster pressed.

Why it is still open

Training is a bottleneck. Ukraine's Minister of Social Policy said queues for limbs there came less from a lack of money than from the need to train more specialists, and a 2025 model by Rosberg Petersson and colleagues puts the world's need at about 0.9 million full-time prosthetics and orthotics workers. A 2025 Philippine study built a thigh-level practice limb, the Pelvic-Femoral Learning Model, because students get few chances to practise casting. Its shape came from a scan of an amputee, it has no sensors, and its authors suggest adding moving parts. A web search found no practice limb that measures where the caster pressed.

ejournals.pheuromaidanpress.comebi.ac.uk

Built with what exists

Platinum-cure silicone such as Smooth-On's Ecoflex or Dragon Skin, cast in 3D-printed moulds; a printed bone core; force-sensing resistors such as Interlink's FSR 402, or a printed pressure mat; an Arduino with an analog multiplexer; plaster bandage; FreeCAD or Blender for the limb shape.

  1. First step

    Draw a below-knee shape, print its mould and bone core, cast one limb with five sensors, and log ten practice casts made by a qualified prosthetist.

  2. Done looks like

    Files and a costed parts list published under an open licence; each sensor within 10% across 20 repeated loadings; at least 50 practice casts made on the limb at two schools, with no record kept of who made each, and instructors' marks of where each cast was pressed matching the sensor log in at least 80% of casts.

Open 02 · the brief

Strength tests for local makers

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open-hardware test machine with which a workshop that makes feet, sockets or pylons locally can run the static proof loads of ISO 10328, the international structural test for leg prostheses, and the heel-to-toe cyclic loading of ISO 22675 for feet, published with drawings, a parts list, calibration steps and software.

Why it is still open

A 2025 study from Universitas Negeri Malang says that local fabricators in Indonesia have begun producing prosthetic feet but that "the lack of standardized testing procedures compromises safety and performance". The team built a static rig for heel and keel tests at 1,230 N, not a cyclic one. At MIT, ZhiYi Liang's 2019 thesis describes the ISO 22675 foot tester that Amos Winter's GEAR Lab built for itself to check its redesign of the Jaipur Foot. A web search found no published design with build files that had been checked against a commercial test machine.

citeus.um.ac.iddspace.mit.edu

Built with what exists

A welded steel or aluminium-extrusion frame; an electric linear actuator or a hand-pumped hydraulic cylinder; a 5 kN S-beam load cell and a displacement sensor; a stepper-driven tilting platform for the heel-to-toe motion; an Arduino or Raspberry Pi with Python for control and logging; a polycarbonate guard around the part under test, since parts can break suddenly.

  1. First step

    Build the static frame to the Indonesian team's published geometry, 8 degrees for the heel test and 15 for the keel, and test three SACH feet on it and on a university machine.

  2. Done looks like

    Build files and a costed parts list published under an open licence; the same ten components, for example SACH feet and 3D-printed sockets, tested on the open machine and on a commercial machine in a university laboratory, with static failure loads within 5% of each other; a second group builds a copy from the files and repeats three of the tests.