Industries / Energy, water and waste / Propane distribution
Tank monitoring
This is the work of knowing how much propane is left in each customer's tank or cylinder, from the dial on the tank to remote monitors and pay-as-you-go meters that report over phone networks, so that the gas arrives before it runs out.
7
Milestones achieved, from 1955 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1955
A float turns a dial
Rochester, then a gauge maker in Rochester, New York, lists its Magnetel gauge for propane tanks in 1955; in 1958 a propane parts distributor bought the propane gauge line and moved it to Dallas as Rochester Gauges, now Rochester Sensors and owned by Amphenol since 2025. In a gauge of this kind a float on a stem inside the tank turns a gear and a magnet, and the dial outside shows the tank's contents as a percentage of its capacity; because the dial couples through a magnet, it can be replaced without emptying the tank, by Propane101's description. The same guide warns that the float gauge "only gives an approximate tank percentage", which is why drivers fill by a separate fixed liquid level gauge, a small valve that spits liquid once the tank reaches 80%.
Credit
Rochester Manufacturing and Rochester Gauges
2002
Dials made ready for sensors
Rochester Gauges lists its patented R3D "Remote Ready" dial in 2002. A remote-ready dial carries a magnet that turns with the float, so a sensor clipped over the dial can read the level and send it by radio or phone network without anyone opening the tank. An open-source sensor published in November 2026 does exactly this: it reads the magnet's angle with an AS5600 chip and converts it to a percentage from a table for each dial type, about 3 degrees of turn for each 1% on one common dial. The weak point is the float. A help page for drivers from EnergyForce, a delivery-software company, describes a float stuck at 38% that dropped to 8% when the driver knocked the lid, and a customer's monitor app showing 69% after a fill the driver had ticketed at 80%, which the page blames on a float hanging at 69%.
Lessona remote monitor that reads the float gauge is only as accurate as the float.
rochestersensors.comgithub.comenergyforce-helpcenter.knowledgeowl.com
Credit
Rochester Gauges
2009
Japan watches its gas cylinders
Japanese LP gas suppliers link a customer's gas meter to a monitoring center through a network control unit, by phone line or radio, for automatic meter reading, alarms, remote shut-off and a watch on how much gas is left in the cylinders. A 2009 market survey by Fuji Keizai, quoted in 2017 by the Japan Utility Telemetering Association (JUTA) to a committee of the Ministry of Economy, Trade and Industry (METI), counted about 6 million of Japan's roughly 24 million LP gas customers on such systems, 25%, against about 5% of city gas customers. One monitoring company, NTT Telecon, watched 256,000 customers and received about 37,000 emergency alarms in the year to March 2016. JUTA lists cheaper deliveries without run-outs among the gains, and names as the first obstacle that the systems borrowed customers' landlines, which fewer homes keep; it has standardized a battery-powered 920 MHz relay radio called U-Bus Air to replace them.
Lessonmonitoring that relied on customers' phone lines had to be rebuilt as households gave up landlines.
Credit
Japan's LP gas suppliers and monitoring centers; figures reported by JUTA
2015
Pay-as-you-cook cylinder meters
In 2015 the GSMA, the association of mobile network operators, gave KopaGas in Tanzania a grant to design a low-cost meter for LPG cylinders and test a pay-as-you-go cooking service, in which customers buy gas in small amounts by mobile money and the meter on the cylinder cuts the supply when the paid amount runs out. A second grant in 2018 took the service to 1,300 customers. In January 2020 Circle Gas, a UK company, bought KopaGas's technology for $25 million, by GSMA's account, and launched it in Nairobi as M-Gas on Safaricom's low-power narrowband Internet of Things network.
Credit
KopaGas founders Sebastian Rodriguez and Andron Mendes; the GSMA Mobile for Development Utilities programme; Circle Gas and Safaricom
2021
Meters measure how Nairobi cooks
Researchers led by Matthew Shupler at the University of Liverpool analyzed smart-meter readings from 426 customers of PayGo Energy, a pay-as-you-go LPG company in the Mukuru kwa Reuben informal settlement in Nairobi: 135,353 customer-days from January 2018 to June 2020. The first meters, from August 2017, measured to the nearest 0.2 kg; from 2019 they were replaced by cylinder meters reading to 0.001 kg. Households used 0.97 kg of gas per person per month before Kenya's COVID-19 lockdown and 1.22 kg during it, and 95% kept cooking with gas. A follow-up by the same group, posted as a preprint in July 2023, found that after the pay-as-you-go price rose 16% between 2021 and 2022, average use fell by two-thirds, from 0.82 to 0.27 kg per person per month.
Lessona meter that sells gas in small amounts also records, household by household, when people cut back.
Credit
Matthew Shupler and colleagues, University of Liverpool, using PayGo Energy's meter data
2024
Few retailers monitor every tank
Gray, Gray & Gray, an accounting and advisory firm whose yearly survey of US propane retailers serves the trade as a benchmark, reported in November 2024 that 11% of responding retailers had monitors on none of their tanks, 30% on 1 to 10% of them, and 6% on more than 90%. Adding its bands, 69% of retailers had monitors on 30% of their tanks or fewer.
Credit
Gray, Gray & Gray; published by LP Gas magazine
2025
Metered gas still loses money
Circle Gas's accounts for 2025, filed on 30 September 2026 and reported by the Kenyan technology site Tech-ish, show 391,139 customers at the end of 2025, 6% fewer than a year earlier because it removed customers who used little gas, and an operating loss of $25.5 million. Cash came from buyers of carbon credits paying in advance, $29.1 million in 2025. Without $28 million from outside investors, the company plans to use only the meters it has already made, scale back in Tanzania and cut spending on meters in Kenya.
Lessona meter on every cylinder lets households buy gas in small amounts, but the business has so far needed carbon-credit money to pay for it.
Credit
Circle Gas (M-Gas); reported by Tech-ish
Watch for
Meters that relearn winter use
Toell, a Japanese LP gas supplier, reported to METI in March 2026 on a pilot of ultrasonic gas meters with a "double learning" function. Ordinary meters lower their automatic shut-off limit over the low-use summer and then cut the gas off needlessly when use rises in autumn; the new meter starts autumn from the limit it learned the year before. From alarms received between April 2025 and January 2026 from its 70,000 existing remote terminals, Toell projects that for 5,400 customers alarms would fall from 884 a year to 231 (73.8%) and staff call-outs from 34 to 9; it says it will verify the effect next fiscal year.
Achieved whenresults measured on the installed meters, not projections, are published and checked by METI or another party outside Toell.
Claimed by
Toell Co., March 2026
Open
01
Measure float gauge error
A bench test that measures how far common propane float gauges, and the remote monitors that read them, stray from the true liquid level. Gauge assemblies are mounted in a new, never-used tank or a clear tank-shaped mock-up, filled and drained with water in 5% steps, level and tilted, with each reading logged by camera and by a clip-on magnetic angle sensor. Water is denser than liquid propane, so a float rides a little higher in it; the test reports the error of the float, linkage and dial and states that offset.
The briefCredit · unclaimed02
Read gauges from phone photos
A public set of at least 1,000 photos of propane tank dials, each labelled with its reading by two people, and a tally of how well vision models read them, so that a retailer could act on a customer's phone photo in place of a monitor or a site visit.
The briefCredit · unclaimed
Open 01 · the brief
Measure float gauge error
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench test that measures how far common propane float gauges, and the remote monitors that read them, stray from the true liquid level. Gauge assemblies are mounted in a new, never-used tank or a clear tank-shaped mock-up, filled and drained with water in 5% steps, level and tilted, with each reading logged by camera and by a clip-on magnetic angle sensor. Water is denser than liquid propane, so a float rides a little higher in it; the test reports the error of the float, linkage and dial and states that offset.
Why it is still open
Propane101 says the float gauge "only gives an approximate tank percentage and cannot be considered 100% reliable", and EnergyForce's help page for drivers describes floats that hang and tells drivers to fill by the fixed-level gauge instead. The open R3D sensor converts dial angle to percent from a table for each dial type but does not test the float. Searches in this session found no published measurement of float-gauge error.
propane101.comenergyforce-helpcenter.knowledgeowl.comgithub.com
Built with what exists
new float gauges from at least two makers; a water-filled test vessel with a sight tube and a load cell to give the true volume; an AS5600 magnetic angle sensor on an ESP32 board, as in the open R3D sensor; a phone camera; Python.
First step
buy two new gauges of one dial type and build the clear test vessel. Use water and air only, never a tank that has held propane.
Done looks like
a published table of reading error at each 5% step, filling and draining, level and at two tilts, for at least 10 gauges from at least two makers, with the raw data.
Open 02 · the brief
Read gauges from phone photos
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of at least 1,000 photos of propane tank dials, each labelled with its reading by two people, and a tally of how well vision models read them, so that a retailer could act on a customer's phone photo in place of a monitor or a site visit.
Why it is still open
General readers for analog gauges exist, such as ETH Zurich's open pipeline from the paper "Under Pressure: Learning-Based Analog Gauge Reading In The Wild". But the propane apps found in this session either use a sensor, like Mopeka's TankCheck, stuck under the tank, or keep readings the owner types in, like PropaneTracker, and none reads the dial from a photo; no labelled set of propane dial photos was found.
Built with what exists
phone cameras; ETH Zurich's analog_gauge_reader; a small open vision model fine-tuned on one GPU (see the Note "One GPU to fine-tune"); Python for scoring.
First step
with owners' permission, photograph the dials of 50 tanks in daylight and at dusk, label them, and run the ETH pipeline on them.
Done looks like
at least 1,000 labelled photos from at least five dial designs, published under an open licence, and each model's share of readings within 2 percentage points of the label, broken down by dial type and lighting.