BRENNEN

Industries / Finance and business services / Printing

Finishing and binding

Finishing and binding is the work done to printed sheets after the press: cutting them to size, folding, gathering, sewing, stapling or gluing them into books and booklets, and die-cutting, creasing and gluing them into labels and cartons.

5

Milestones achieved, from 1836 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1836

    Rubber glue binds books

    William Hancock patented caoutchouc binding in England in 1836, probably the first form of adhesive binding, in which single sheets were held together by rubber solution instead of thread. Great numbers were made in England and the United States from about 1840.

    LessonThe rubber did not stay flexible and most of these bindings have fallen apart, so a binding has to be judged over decades, not at delivery.

    cool.culturalheritage.orgcool.culturalheritage.org

    Credit

    William Hancock, by Etherington and Roberts' dictionary of bookbinding terms

  2. 1844

    Guillotines cut paper stacks

    A guillotine cuts a clamped stack of paper with one heavy blade. A Frenchman named Thirault built a fixed-blade model in 1837, and Guillaume Massiquot patented machines similar to today's in 1844 and 1852. Modern machines need both hands to start the clamp and the cut, and stop the knife at the top of its stroke so it cannot cut twice.

    cool.culturalheritage.org

    Credit

    Thirault and Guillaume Massiquot, by Etherington and Roberts

  3. 1868

    A machine sews books

    David McConnell Smyth was granted US patent 74,948 for a book-sewing machine on 25 February 1868. That machine did not succeed; his improved design, patented in 1879, went into use at the Riverside Press in Cambridge, Massachusetts, in 1880, and Smyth Manufacturing's Improved No. 3 of 1886 was the first truly successful book-sewing machine, by Jeremy Norman's History of Information.

    LessonMachine sewing took 18 years from first patent to a machine binders relied on.

    patents.google.comhistoryofinformation.comcool.culturalheritage.org

    Credit

    David McConnell Smyth

  4. 2000s

    Reactive glue binds digital pages

    Most paperbacks are glued with EVA (ethylene vinyl acetate) hot melt, which sets as it cools. Reactive polyurethane (PUR) hot melt keeps curing with moisture from the air and paper for 24 to 48 hours, and ends up as much as twice as strong, by Edward Petrie's 2008 review, which called it relatively new to bookbinding. By 2013 PUR had replaced EVA for photo books and for digitally printed papers carrying silicone oils that EVA could not grip, by the account of Don Piontek, a bindery equipment representative.

    LessonBooks shipped before the glue had cured failed, and some runs had to be reprinted and rebound, so curing time is part of the process.

    adhesivesmag.compiworld.com

    Credit

    makers of PUR adhesives and the binders who adopted them; no single originator is named in these sources

  5. 2020

    Robots stack folded signatures

    A signature is a printed sheet folded into a group of pages. Heidelberg launched the P-Stacker, a robot arm that takes stacks of signatures from a folding machine and builds pallets, in 2020. Two German printers reported their results to Druckspiegel in November 2021: Aumüller Druck in Regensburg said output rose by about 25%, and Meinders & Elstermann in Belm said its folders ran at least 15% faster and its staff no longer moved up to six tonnes of paper a shift by hand.

    druckspiegel.de

    Credit

    Heidelberg; Aumüller Druck and Meinders & Elstermann

Watch for

  1. Die-cutter claims tighter register

    A die-cutter stamps cartons out of printed sheets, and on simpler machines people strip the waste and separate the cartons by hand. Bobst and Shanxi Ruixing Printing and Packaging, a Chinese maker of medicine cartons, say a Bobst SP 106 Evo ER die-cutter that strips waste inside the machine runs at 7,000 to 8,000 sheets an hour and improves register and the flatness of creases by more than 20% over the printer's previous equipment.

    Achieved whensomeone outside the two companies measures register, crease quality and staff hours on the line before and after.

    packaginginsights.com

    Claimed by

    Bobst and Shanxi Ruixing, August 2026

Open

  1. 01

    Robot strips die-cut sheets

    A low-cost robot arm that takes a die-cut sheet of small cartons or labels, knocks out the waste and separates the blanks without tooling made for the layout, and learns a new layout from a handful of demonstrations, for short runs in shops that now do this by hand.

    The brief
    Credit · unclaimed
  2. 02

    Code print shop injuries

    A public, coded table of the severe injuries that printing companies have reported to OSHA, the US workplace safety regulator, starting with cutters, folders, stitchers, die-cutters and wrapping machines in the bindery and including presses for comparison. For each report, code the machine, the task (clearing a jam, cleaning, setting up, normal running), whether a guard or lockout (the procedure that cuts off a machine's power before hands go in) was in place, and the body part, and link the OSHA inspection where there is one.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot strips die-cut sheets

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A low-cost robot arm that takes a die-cut sheet of small cartons or labels, knocks out the waste and separates the blanks without tooling made for the layout, and learns a new layout from a handful of demonstrations, for short runs in shops that now do this by hand.

Why it is still open

Machines for this exist, inside large die-cutters and as standalone strippers sold mostly by Chinese makers: WETRY's Catus105ProMax strips a whole sheet with ejector pins that its maker says save "a lot of mold change time", and KYD's 1080A strips waste row by row and separates the blanks. They are set up for each layout. In August 2026 the general manager of Shanxi Ruixing still described manual waste stripping and blank separation as highly labor-intensive and inconsistent, and the fix the company bought was a large die-cutter that strips inside the machine. GitHub searches for "die cut stripping", "diecut waste", "carton blanking", "waste stripping" and "blank separation" (November 2026) returned no projects, and no robot that learns stripping from demonstrations was found.

allinprint.comallinprint.compackaginginsights.com

Built with what exists

An SO-101 arm with Hugging Face's LeRobot software (see the Note "No download"); a robot model that learns a task from a few demonstrations, such as NVIDIA GR00T 2 (see the Note "Five demonstrations per task") or Runway Praxis-1 (see the Note "Open robot model weights"); a color-and-depth camera; a simple breaking jig; sheets die-cut in advance by a print shop or on a desktop cutting plotter. The robot works on a bench, never at a die-cutter. Robot models that learn from a few demonstrations are what bring this within reach of a small team.

  1. First step

    Ask a local carton or label shop for 50 die-cut, unstripped sheets of one small carton, and film a person stripping 10 of them to set the baseline.

  2. Done looks like

    50 filmed sheets of one carton layout, with a published tally of blanks separated undamaged, waste pieces left in the blanks and seconds per sheet, against a person's time on the same sheets; then a second layout learned from no more than 20 demonstrations and tallied the same way, with no new tooling.

Open 02 · the brief

Code print shop injuries

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, coded table of the severe injuries that printing companies have reported to OSHA, the US workplace safety regulator, starting with cutters, folders, stitchers, die-cutters and wrapping machines in the bindery and including presses for comparison. For each report, code the machine, the task (clearing a jam, cleaning, setting up, normal running), whether a guard or lockout (the procedure that cuts off a machine's power before hands go in) was in place, and the body part, and link the OSHA inspection where there is one.

Why it is still open

Since 1 January 2015, US employers have had to report every amputation, in-patient hospitalization or loss of an eye to OSHA, which publishes the reports. Its file for January 2015 to November 2025 holds 434 reports from printing companies (NAICS codes starting 323), 222 of them with an amputation, by a count of the downloaded file made for this entry. OSHA codes the source of each injury only broadly, such as "Presses-printing" for 96 reports and "Bindery machinery" for 14, and leaves the machine and the task in a short narrative. A web search found no published breakdown of these reports for printing by machine and task.

osha.govosha.gov

Built with what exists

OSHA's severe injury report file (CSV) and its public inspection search; a low-cost AI model such as Muse Ember to draft codes from each narrative for a person to check (see the Note "The jobs agents repeat"); Python with pandas; a CSV file on GitHub. The table codes machines and tasks; it names no injured workers, and OSHA's file holds none.

  1. First step

    Download OSHA's file, keep the rows whose NAICS code starts with 323, and code the first 50 bindery reports by hand to fix the categories.

  2. Done looks like

    All 434 printing reports from 2015 to 2025 coded, a second person recoding a random 20% with the agreement rate published, and a table of the ten most common machine-and-task pairs with counts.