Industries / Finance and business services / Printing
Color control
Color control is making printed color match what the customer approved, from one sheet to the next and from one printer to another, by measuring color as numbers and printing to shared targets.
6
Milestones achieved, from 1931 to 2022.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1931
Color becomes a number
The International Commission on Illumination (CIE), the standards body for light and color, set out in its CIE 1931 standard colorimetric observer how an average eye responds to each wavelength of light. With these tables any measured color can be written as three numbers, and the CIE's colorimetry recommendations built on them define how colors and color differences are calculated. Print standards still state their targets in CIE terms: the European offset reference data give CIELAB values, and since October 2016 digital proofs have been judged with the CIEDE2000 color-difference formula, by the European Color Initiative's account.
Credit
the CIE
1963
Spot inks get numbers
A spot color is a premixed ink printed as itself rather than built from dots of cyan, magenta, yellow and black. Lawrence Herbert, a color matcher at Pantone from 1956, devised the Pantone Matching System, numbered ink colors printed as swatches, as an alternative to separate color books and standards for each ink maker, by NJBIZ's account. Pantone dates its founding to 1963, and a designers' edition of the guide with tear-out color chips followed in 1964, by the People's Graphic Design Archive.
Credit
Lawrence Herbert and Pantone
1993
Profiles carry color between devices
Eight industry vendors founded the International Color Consortium (ICC) in 1993 to build an open, vendor-neutral way to manage color across computers and devices. Its profile format describes how a scanner, screen, proofer or press reproduces color, so software can translate color from one device to another; the specification became the international standard ISO 15076-1 in 2010.
Credit
the International Color Consortium
2005
Gray balance as the target
G7, introduced in 2005 by Idealliance, the US printing-industry group behind the SWOP and GRACoL printing specifications, calibrates a press by making its grays print neutral and its tones follow set aims, and the same method serves offset, flexo, toner and gravure printing. ISO's offset standard had set aims for tone value increase instead, how much the halftone dots grow on press. Printers are certified to G7 through a third-party lab, and the method now underlies "several widely adopted print and color global standards," by its owner's account. Idealliance is now part of PRINTING United Alliance.
Credit
Idealliance
2015
Brighter paper resets targets
Paper makers add optical brightening agents that make paper look whiter by fluorescing, and how much they glow depends on the light used to measure them. ISO 13655:2009 defined measurement conditions M0 to M3 to fix that light, and the offset standard ISO 12647-2 was revised in December 2013 to take the brighteners into account. On 30 September 2015 Fogra, the European Color Initiative (ECI) and the German printing federation bvdm published new reference data, including FOGRA51 ("PSO Coated v3"), measured under condition M1, with matching ICC profiles and control strips.
LessonA change in the paper broke color targets set years earlier; in May 2014 the ECI reported "concern that it will require major efforts to implement, without bringing much improvement," and kept the old data in effect until a beta test was finished.
Credit
Fogra, ECI and bvdm
2022
Spot colors behind a subscription
Under a licensing change between Adobe and Pantone, most Pantone color books were phased out of Illustrator, InDesign and Photoshop in updates released after 16 August 2022, leaving three books after November 2022; designers who relied on them had to buy a separate Pantone license, about US$60 a year, Pixel Envy reported, quoting Adobe. The University of Wisconsin-Stout warned its users in November 2022 that projects using Pantone colors might be affected.
LessonColor data that a whole workflow depends on can be withdrawn by its owner; by 2026 the Ghent Workgroup was teaching how spot colors work in print production "if the Pantone Libraries are no longer available to you.".
Credit
Adobe and Pantone
Watch for
One dataset for world offset
ISO's committee for printing technology (ISO TC 130, Working Group 3) began a worldwide beta test on 18 August 2025 of a "Universal Characterization Dataset" (UCD) for premium coated paper. It aligns Europe's Fogra data, the US GRACoL data and others into one reference, and brings G7's near-neutral gray balance into the revised offset standard ISO 12647-2. Printers in every region print a test form and send their sheets for review, and the organizers aimed at publication at a spring 2026 meeting in Paris. In late 2026 Fogra advertised January 2027 webinars saying the new ISO 12647-2 is about to be published after eight years of revision.
Achieved whenISO publishes the new ISO 12647-2 with the dataset, and printers outside the working group report sheets printed to it that fall within the standard's tolerances.
Claimed by
ISO TC 130 Working Group 3, announced through PRINTING United Alliance, August 2025
Open
01
Phone check of press sheets
A free phone method that photographs a printed control strip next to a small printed reference card and reports whether the sheet's color is within tolerance, and a public test of how often its verdict agrees with a spectrophotometer's.
The briefCredit · unclaimed02
Open data on overprinted inks
A public set of spectral measurements of spot inks printed over one another, as solids and tints, on several papers and films, plus open-source prediction models scored on ink pairs held out of training.
The briefCredit · unclaimed
Open 01 · the brief
Phone check of press sheets
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free phone method that photographs a printed control strip next to a small printed reference card and reports whether the sheet's color is within tolerance, and a public test of how often its verdict agrees with a spectrophotometer's.
Why it is still open
A 2024 study in Sensors tested four low-cost color instruments and a smartphone camera on 183 colors of the RAL Design System Plus paint chart; the best instrument matched 99% of colors with a color difference (ΔE00, a standard measure of how far apart two colors look) of 0.5 to 1.05, while the cheapest instrument and the phone matched 54 to 77% with a ΔE00 of about 1.85. That test used paint chips, not printed dots on paper. Other phone tests found in Crossref were made for clinical work (Zhang and Leung, 2025) and for copying cultural heritage (Cruz Leão and Westland, 2019), and a web search found no published test of phone readings on press control strips against print tolerances.
Built with what exists
A recent phone that saves raw (DNG) photos; the free ECI/bvdm Gray Control strip; Python with OpenCV and the colour-science library; Argyll CMS, free color-management software that reads common spectrophotometers, for reference readings; a spectrophotometer such as an X-Rite i1Pro 3, or a low-cost Nix Spectro 2 checked against one.
First step
Print the ECI/bvdm Gray Control strip on an office printer, measure it with a borrowed spectrophotometer, and compare phone photos taken under three kinds of light.
Done looks like
On 200 press sheets from at least three printers, the phone's pass or fail verdict agrees with the spectrophotometer's on at least 90% of sheets, with the patch-by-patch ΔE00 between phone and instrument published.
Open 02 · the brief
Open data on overprinted inks
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of spectral measurements of spot inks printed over one another, as solids and tints, on several papers and films, plus open-source prediction models scored on ink pairs held out of training.
Why it is still open
Designers mostly see spot-ink overprints only as an on-screen guess, and the models that predict them are tested on private prints. Kiran Deshpande and Phil Green of the London College of Communication proposed a simple overprint model meant to fit inside PDF/X files or ICC profiles. Radovan Slavuj and Elie Khoury of Alwan Color Expertise reported in the 2025 TAGA Proceedings that a spectral model predicted two-color offset overprints with an average ΔE00 of 0.9, against 3.4 for the simpler model, on their own test prints. Searches of Crossref, Hugging Face and GitHub found no public set of measured overprints.
Built with what exists
A laboratory ink proofer, such as those made by IGT Testing Systems or RK Print Coat Instruments, to print one ink over another; spot inks from an ink supplier; a spectrophotometer that writes CxF/X-4 (ISO 17972-4) spot color files; Python with the colour-science library and scikit-learn or PyTorch for the models; Zenodo to host the data.
First step
Ask a university printing program or an ink maker for spot-ink drawdowns, and measure ten two-ink overprints at five tint levels each.
Done looks like
At least 2,000 measured overprint patches from 20 or more ink pairs on at least two papers or films, released under an open license, with the mean and 95th-percentile ΔE00 of at least two models on held-out ink pairs.