BRENNEN

Industries / Construction and property / Heavy civil / Paving

Grading and base

Grading cuts and fills the ground to the right shape and slope, and the base is the layer of packed stone, soil or treated soil that carries the pavement laid on top of it.

5

Milestones achieved, from 1931 to 2006.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1931

    One machine to cut grade

    A motor grader is a long machine with a steel blade slung under its middle that cuts and levels ground to an exact shape. Equipment World credits the Russell Grader Co. with the first self-propelled motor grader, in 1920, and says Russell's "Motor Patrol" of 1926 was built on a Caterpillar track-type tractor. Caterpillar bought Russell two years later, and in 1931 it brought out the Auto Patrol, built as one machine instead of a tractor with a grader frame fitted around it, which Caterpillar calls "the industry's first true motor grader."

    equipmentworld.com

    Credit

    Russell Grader Co.; Caterpillar

  2. 1933

    Water sets the density

    R. R. Proctor, a field engineer at the Los Angeles Bureau of Waterworks and Supply, set out a system of simple laboratory and field tests for compacting soil in a series of four articles in Engineering News-Record, the first on August 31, 1933. The required density was to be reached by controlling the compacting equipment and by putting the correct amount of water into the soil before it was compacted: for a given effort, a soil packs densest at one moisture content, called its optimum. His articles were about earth dams, but the laboratory form of his method, now called the standard Proctor test (ASTM D698 and AASHTO T 99), is the usual way to find the moisture and maximum density that field compaction of soil is measured against.

    archive.orgen.wikipedia.org

    Credit

    Ralph Roscoe Proctor

  3. 1933

    Cement stirred into soil

    Soil-cement is local soil broken up, mixed with a little portland cement and water, and compacted into a hard base, so that less crushed stone has to be hauled in. Patents for mixing soil and cement for roads were issued as early as 1917, and in 1924 the Iowa State Highway Commission and the US Bureau of Public Roads built two test sections of earth road treated with cement and hydrated lime. Field experiments in South Carolina in 1933 and 1934 were followed quickly by projects in South Dakota, Iowa, Ohio, California and Texas, and in 1935 the Portland Cement Association (PCA) began an intensive research program on the mixtures. By 1960 the PCA reported 24,000 miles (about 38,600 km) of soil-cement base in the United States and Canada.

    Lessonthe cement trials of the 1920s gave uneven results, because mixing and compaction were poorly understood and laboratory tests did not match field performance; bases became uniform once the water content and density were controlled.

    publications.iowa.gov

    Credit

    highway engineers in South Carolina and Iowa; the Portland Cement Association; the US Bureau of Public Roads

  4. 1980

    Plastic grids hold stone

    A geogrid is a plastic mesh laid in or under a layer of stone, so that the stones lock into its openings and spread a load instead of being pushed aside. Brian Mercer, who in the 1950s had patented the Netlon process for extruding molten plastic into a net, invented the stronger Tensar process in 1978, which aligns the plastic's long-chain molecules in the grid's ribs and joints. In a 1980 trial at Newmarket Silkstone colliery in Yorkshire, England, a Tensar grid stabilized the stone in the ground beneath a railway, and the Institution of Civil Engineers reports no discernible settlement after three years, with up to 300 tonnes of waste an hour passing over the line. The Institution lists pavements and roads among the grids' uses today.

    ice.org.uk

    Credit

    Brian Mercer; Netlon Ltd

  5. 2006

    When lime makes soil swell

    Lime or cement is often mixed into a clay subgrade, the natural ground under a road, to stiffen it. Over about 15 years the Texas Department of Transportation (TxDOT) saw more pavements fail during or soon after construction on roads designed to last 20 years or more. The cause of many was sulfate-induced heave: calcium from the lime or cement reacts with clay and sulfate minerals, usually gypsum, to form ettringite, a mineral that swells and lifts the road, sometimes years later. Researchers at the Texas Transportation Institute (TTI) built a database of eight failed projects and blamed ettringite for the heave on every project they had studied. Their 2006 guidance treats soil with up to 3,000 parts per million (ppm) of sulfate in the usual way; from 3,000 to 7,000 ppm it calls for changes such as mellowing, letting the lime react in the soil for a set time before compaction; above 7,000 ppm it points to other binders, such as ground blast-furnace slag or fly ash with lime.

    Lessontest the soil for sulfate before adding lime or cement, because the stabilizer can turn a stable subgrade into a swelling one.

    library.ctr.utexas.edulibrary.ctr.utexas.edu

    Credit

    Pat Harris, Johanna von Holdt, Stephen Sebesta and Tom Scullion, Texas Transportation Institute, for TxDOT

Watch for

  1. A geogrid tested in miniature

    S. Subramanian of the Transtec Group and J. G. Zornberg of the University of Texas at Austin built reduced-scale pavement sections and ran a model Mobile Load Simulator (MLS11) over them, with the wheel load scaled to 1:19 of a full-size axle. The section with a geogrid inside its stone base carried 230% more traffic than an identical section without one before it reached the same rut depth, and the vertical stress in the middle of its base was 30% lower. Two control sections built the same way performed within 10% of each other.

    Achieved whenfull-size sections on a road or test track, measured by a group other than the authors, show a gain of similar size.

    sites.utexas.edu

    Claimed by

    S. Subramanian and J. G. Zornberg, in Geosynthetics International, accepted January 2026

Open

  1. 01

    A national sulfate screen

    A free map that flags where subgrade soils are likely to hold sulfate, built for the whole United States from soil survey and geologic map data, and scored against published sulfate test results from road projects.

    The brief
    Credit · unclaimed
  2. 02

    Ponding check by phone

    A phone method that scans a graded base just before paving and marks where water will pond on the finished surface, for parking lots and driveways that are graded without a survey crew.

    The brief
    Credit · unclaimed

Open 01 · the brief

A national sulfate screen

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free map that flags where subgrade soils are likely to hold sulfate, built for the whole United States from soil survey and geologic map data, and scored against published sulfate test results from road projects.

Why it is still open

Texas screens projects with its own geologic atlas. In TTI's database the atlas flagged six of the eight failed projects; for one of the misses, a farm road built on the Yazoo Formation, the atlas description named no sulfur-bearing minerals at all. Oklahoma's Department of Transportation planned an online "sulfate hazard" map in a 2009 research proposal, and whether it was published could not be confirmed. Other mapping work found covers single sites, such as a geostatistical map along one water pipeline in north Texas. No national screen tested against field results was found.

library.ctr.utexas.eduodot.org

Built with what exists

gSSURGO, the US Department of Agriculture's gridded soil survey, which records gypsum content by soil layer; the US Geological Survey's State Geologic Map Compilation; QGIS, or Python with GeoPandas; sulfate test results and project locations taken from state transportation research reports.

  1. First step

    Place TTI's eight case projects on the gSSURGO gypsum values and the state geologic map, and record which source flags each one.

  2. Done looks like

    A public map layer and a table of at least 100 located sulfate test results from at least three states, with the share of high-sulfate sites the map flags and the share of low-sulfate sites it flags wrongly.

Open 02 · the brief

Ponding check by phone

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone method that scans a graded base just before paving and marks where water will pond on the finished surface, for parking lots and driveways that are graded without a survey crew.

Why it is still open

Phone lidar has been tested for slopes, but not for drainage before paving. In a 2024 FHWA study of 13 curb ramps in Anoka County, Minnesota, slopes taken from three free iPhone and iPad scanning apps differed from a survey-grade laser scan by 0.72 to 1.10 percentage points (root mean square), while different inspectors using digital levels on the same kind of ramp differed by about 0.5 points. In a 2025 test, Sara Zollini and Laura Marconi of the University of L'Aquila paired an iPhone 14 Pro with a clip-on satellite receiver and measured within a few centimeters of a survey-grade receiver in open ground at three bridge sites. No published test was found that uses a phone to check a base for drainage before paving.

rosap.ntl.bts.govpmc.ncbi.nlm.nih.gov

Built with what exists

an iPhone or iPad with lidar; scanning apps such as Scaniverse or 3D Scanner App, or a clip-on receiver such as the viDoc RTK Rover with its PIX4Dcatch app; CloudCompare to compare surfaces; a builder's level or a rented total station for the checks.

  1. First step

    With the owner's permission and while no machines are working, scan one prepared driveway base and compare 20 points with a borrowed level.

  2. Done looks like

    On 10 graded sites, slopes taken from the phone scan fall within 0.5 percentage points of slopes from a level survey along at least 50 check lines per site, and the predicted ponds are compared, site by site, with photos of standing water after the first rain on the finished pavement.