BRENNEN

Industries / Government, education and community / Government / Parks and recreation

Land and trails

Setting aside land for public parks, and building and protecting the paths that let people walk, ride and roll through it.

6

Milestones achieved, from 1847 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1847

    A park on public money

    Birkenhead's Improvement Commissioners paid Joseph Paxton, head gardener at Chatsworth, £800 to design a park, and set aside plots around its edge for private villas. The park opened in 1847 and covers about 90 ha. England's Register of Parks and Gardens calls it the first public park in the United Kingdom established at public expense, and influential on park design at home and abroad; elements of its design appear in Central Park, New York.

    parksandgardens.orgbirkenhead-park.org.uk

    Credit

    Joseph Paxton; the Birkenhead Improvement Commissioners

  2. 1872

    The first national park

    On 1 March 1872 President Ulysses S. Grant signed the Yellowstone National Park Protection Act, which reserved the headwaters of the Yellowstone River for the public. It came six months after the Hayden Expedition, whose photographs, paintings and reports had caught the imagination of Congress. The National Park Service calls it the world's first national park. It notes that Hot Springs, Arkansas, set aside in 1832, is sometimes listed first, but was a reservation to manage a resource, its hot water. The Service also says the act "led to the forced removal of Indigenous Tribes who lived in and around the Yellowstone area", and that 27 present-day tribes have historic connections to the park.

    LessonA park presented as untouched wilderness was made by removing the people who already used the land.

    nps.govnps.gov

    Credit

    US Congress; President Ulysses S. Grant

  3. 1937

    Maine to Georgia on foot

    A six-man Civilian Conservation Corps crew finished the last link of the 2,025-mile Appalachian Trail in the Maine woods on 14 August 1937. Volunteers led by Myron Avery, chairman of the Appalachian Trail Conference and the first person to walk and measure the whole route, scouted, marked and maintained it, including across private land, while national forest and park crews and Depression-era agencies did most of the building on public land.

    LessonA route that crosses private land on the owners' goodwill is fragile, and protecting it set the conference's course for the next 60 years.

    appalachiantrail.org

    Credit

    Myron H. Avery and the Appalachian Trail Conference; the Civilian Conservation Corps; the US Forest Service

  4. 1983

    Old railways kept as trails

    A 1983 amendment to Section 8(d) of the US National Trails System Act created railbanking: a railroad giving up a line can agree to let a trail group use the corridor until trains are needed again, so the corridor is not broken up and sold. Rails to Trails Conservancy, founded in February 1986, counts 273 rail-trails covering 4,800 miles created this way from 1983 to 2026.

    railstotrails.orgrailstotrails.org

    Credit

    US Congress; Rails to Trails Conservancy

  5. 2009

    A park on a viaduct

    The first section of the High Line, a park on a 1930s elevated freight line on Manhattan's West Side, opened in 2009 between Gansevoort and 20th streets. Trains had stopped by the 1980s and a demolition order had been signed when Joshua David and Robert Hammond founded Friends of the High Line in 1999 to save it; James Corner Field Operations, Diller Scofidio + Renfro and Piet Oudolf designed the park. Critics accused the park of speeding up gentrification around it. In 2017 Hammond told CityLab that the founders had cared more about the design than about its effect on the neighbors: "We were from the community. We wanted to do it for the neighborhood. Ultimately, we failed."

    LessonA celebrated park can still fail its neighbors; Hammond said he wished they had first asked the neighbors what the park could do for them, instead of what it should look like.

    thehighline.orgdnainfo.com

    Credit

    Joshua David and Robert Hammond, Friends of the High Line; City of New York

  6. 2026

    Walking distance measured

    The Trust for Public Land's ParkScore index ranks the park systems of the 100 most populous US cities on access, investment, amenities, acreage and equity. Its access measure is the share of residents who live within a 10-minute walk of a park: 76% on average in the 2026 index, as Texas Public Radio reported, 99% in top-ranked Washington, D.C., and 47% in San Antonio. Only parks and residents inside city limits count, so a city beside a national forest gets no credit for it.

    tpl.orgtpr.orgdeseret.com

    Credit

    Trust for Public Land

Watch for

  1. England's coast path finished

    Natural England is opening the King Charles III England Coast Path, a 2,700-mile National Trail around England's whole coast, one stretch at a time as the government approves each. Its progress page says that, subject to the spending review, the path was expected to be complete by spring 2026, and the Ramblers, a walking charity, say its official opening in 2026 marks the completion of the trail. Natural England's own table, on the page last updated 10 November 2026, lists 2,219 of 2,690 submitted miles open to the public, 403 approved or awaiting work, and 68 awaiting a government decision.

    Achieved whenNatural England's table shows every stretch legally open.

    gov.ukramblers.org.uk

    Claimed by

    Natural England and the Ramblers, 2026

Open

  1. 01

    Trail slopes measured by phone

    A phone app that records a trail as someone walks or rolls along it, using the camera, motion sensors and, where the phone has one, its LiDAR depth sensor, and reports clear tread width, running slope (the slope along the direction of travel) and cross slope (the tilt across it) every few meters. It flags each stretch that breaks accessibility limits.

    The brief
    Credit · unclaimed
  2. 02

    Visitor-made trails mapped from above

    A model that finds informal trails, the paths visitors wear by cutting across vegetation, in aerial or drone photos of a park, and a map that shows where new ones appeared between two dates.

    The brief
    Credit · unclaimed

Open 01 · the brief

Trail slopes measured by phone

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone app that records a trail as someone walks or rolls along it, using the camera, motion sensors and, where the phone has one, its LiDAR depth sensor, and reports clear tread width, running slope (the slope along the direction of travel) and cross slope (the tilt across it) every few meters. It flags each stretch that breaks accessibility limits.

Why it is still open

US Forest Service trail rules require at least 36 inches (915 mm) of clear tread width, allow a running slope of up to 1:20 (5%) over any length, allow steeper grades only for short segments, and never allow more than 1:8 (12%). Checking this means measuring along the whole trail. The nearest automated work, OmniPath (June 2026), checks sidewalks mapped in OpenStreetMap against ADA limits using airborne LiDAR at 0.5 m steps. I found no phone tool tested against a hand survey on park trails.

fs.usda.govarxiv.org

Built with what exists

an iPhone or iPad Pro with LiDAR and Apple's ARKit, or an Android phone with ARCore depth; Open3D, an open-source library for 3D point clouds; a digital level and measuring wheel for the reference survey.

  1. First step

    Measure one 100 m park path by hand with a digital level, scan it with a LiDAR phone, and compare the two.

  2. Done looks like

    20 trail segments of 100 m each, measured by hand every 2 m and by the app, with published mean errors for width (in inches) and for running and cross slope (in percentage points), and the share of non-compliant stretches the app catches.

Open 02 · the brief

Visitor-made trails mapped from above

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A model that finds informal trails, the paths visitors wear by cutting across vegetation, in aerial or drone photos of a park, and a map that shows where new ones appeared between two dates.

Why it is still open

Informal trails "remove vegetation, displace wildlife, alter hydrology, alter habitat, spread invasive species, and fragment landscapes", in the words of a 2011 study of Great Falls Park, Virginia, by Jeremy Wimpey and Jeffrey Marion, published through the US Geological Survey. The nearest automated work, a 2025 study by José Francisco Diez-Pastor and colleagues, maps trails worn by grazing animals in aerial images. I found no model trained or tested on visitor-made trails.

pubs.usgs.govarxiv.org

Built with what exists

free aerial photos from the US Department of Agriculture's NAIP program, or a drone; QGIS to trace the answer key; a segmentation model such as U-Net in PyTorch, or a small open vision model fine-tuned on one graphics card (see the Note "One GPU to fine-tune").

  1. First step

    Trace the informal trails in one city park on two years of free aerial photos and measure how many meters of new trail appeared in between.

  2. Done looks like

    For three parks, informal trails traced on the ground or on imagery as the answer key, and the model's share of trail length found and share of flagged length that is real, published with the labels.