BRENNEN

Industries / Consumer goods / Furniture / Mattresses

Recycling

Recycling collects used mattresses, takes them apart and sells their steel, foam, fiber and wood for reuse, and in a growing number of places the companies that make and sell mattresses must pay for that work.

7

Milestones achieved, from 1929 to 2021.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1929

    Rules for remaking used bedding

    Minnesota's bedding law of 1929 shows that remaking, or "renovating", used mattresses was already a trade. It banned remaking bedding unless every material had first been sterilized, by dry heat, by live steam followed by drying, or by ten hours of formaldehyde and sulphur, and required a label sewn on all four edges saying whether the filling was new or secondhand. The same hygiene worry still governs reuse: OVAM, the waste agency of Flanders in Belgium, uses a decision tree so that worn mattresses are not sold on, and in 2024 the reuse shops working with Valumat, the Flemish mattress scheme, sorted 186 of the 315 tonnes of mattresses they collected (59%) for resale.

    LessonSince at least 1929, hygiene has been the first test for reusing a mattress.

    revisor.mn.govrevisor.mn.govpublicaties.vlaanderen.be

    Credit

    Minnesota Legislature (session law of 1929, chapter 358); OVAM; Valumat

  2. 2011

    A machine line for dismantling

    RetourMatras, a Dutch firm started by Nanne Fioole, opened its first plant at Lelystad in 2011 with machines it built itself: they cut a mattress open on three sides and peel off the cover, workers lift out the pocket springs, and the foam is cut into strips and baled. The company says the line takes one mattress every 50 seconds; the Dutch broadcaster NOS reported in 2021 that it took under 1.5 minutes, and that IKEA and the waste firm Renewi each owned a third. Box springs with wooden frames and thin toppers must still be taken apart by hand, at about 15 minutes per box spring, because a fast saw cutting wood gets hot enough to start a fire. By May 2025 the firm ran four sites in the Netherlands, three in the UK and one in France.

    LessonThe machines handle only the mattress types they were built for, so someone has to sort mattresses by type before they reach the line.

    circular.kk.dknos.nlecomaison.com

    Credit

    Nanne Fioole and RetourMatras; investors Ingka (IKEA) and Renewi

  3. 2012

    Makers pay in Europe

    France's Grenelle II law of 2010 and a decree of 6 January 2012 made producers of furniture pay for collecting and treating it once it is thrown away, a system called extended producer responsibility (EPR); buyers see the cost as an "éco-participation" fee, which for a mattress is 3% to 5% of the price. Ecomaison (formerly Eco-mobilier), the body the producers set up, says it began collecting mattresses in 2012 and calls this the world's first mattress recycling scheme; the environment ministry says the furniture scheme has run since 2013. In 2025 Ecomaison collected nearly 5 million mattresses, about 79,000 tonnes, through 6,000 drop-off points and eight dismantling centers. Flanders followed on 1 January 2021 with Valumat, which collected 345,000 mattresses separately in 2022, and the Netherlands from 1 January 2022 with Stichting Matras Recycling Nederland (MRN).

    LessonA recycling rate can mean two different things; Ecomaison says 55% of a dismantled mattress's weight becomes new raw material, and more than 98% if burning for energy is counted.

    ecologie.gouv.frecomaison.comacrplus.orgzoek.officielebekendmakingen.nl

    Credit

    French Parliament; Eco-mobilier and Ecomaison; Flemish government, OVAM and Valumat; Dutch government and MRN

  4. 2015

    Industry-run programs in US states

    After laws in Connecticut, California and Rhode Island, the US bedding industry formed the Mattress Recycling Council (MRC), whose Bye Bye Mattress program began in Connecticut in 2015 and in California and Rhode Island in 2016. Oregon's 2022 law made it the fourth state, with operations from 1 January 2025; in its first year 134,121 mattresses and box springs were collected there, and 75.6% of their weight was reused, recycled or burned as biomass fuel. MRC says it has recycled more than 17 million mattresses in ten years, keeping more than 650 million pounds out of landfills, including 288 million pounds of steel, 100 million of foam and 86 million of wood. Nearly all the used foam is sold to make carpet underlay, a market MRC expects to shrink as buyers switch to hard floors.

    LessonWith foam tied to one shrinking market, MRC names new foam markets as its research priority.

    mattressrecyclingcouncil.orgmattressrecyclingcouncil.orgoregon.gov

    Credit

    the Connecticut, California, Rhode Island and Oregon legislatures; Mattress Recycling Council

  5. 2018

    California's auditor finds gaps

    In August 2018 California's State Auditor reported that CalRecycle, the state recycling agency, had set recycling goals that counted only the work of MRC's own contracted recyclers, and no goals at all for convenience, illegal dumping or reducing waste at the source. Inspections found violations in 74% of 285 visits, but no penalties were charged, while the program, paid for by a $10.50 fee on each new mattress, held more than $42 million of net assets at the end of 2017. The legislature responded in 2019 with AB 187, which required goals for convenience, but in October 2022 the auditor still recorded no action on goals for illegal dumping or source reduction.

    LessonWhen a program reports only the mattresses it handles, nobody measures the ones it misses, including those dumped illegally.

    information.auditor.ca.govinformation.auditor.ca.gov

    Credit

    California State Auditor; California Legislature

  6. 2018

    Voluntary schemes in Britain, Australia

    Britain has no law requiring mattress take-back. In November 2018 the National Bed Federation (NBF), the UK bed industry's trade body, set a voluntary goal of keeping 75% of old mattresses out of landfill by 2028; its fifth report, in October 2025, found that 56% of mattresses were sent for recycling in 2023 but only 33% were actually recovered as material, up from 14% in 2020, and the NBF now asks the government for a mandatory scheme. In Australia the competition regulator, the ACCC, approved the industry's voluntary Recycle My Mattress scheme in October 2022, until October 2027, with a fee of A$10 per mattress; the industry's own analysis estimated that 800,000 whole mattresses go to landfill there each year.

    Lesson"Sent for recycling" and "recycled" are different numbers; in Britain in 2023 they were 56% and 33%.

    furniturenews.netbedfed.org.ukaccc.gov.au

    Credit

    National Bed Federation; Australian Bedding Stewardship Council; ACCC

  7. 2021

    Foam back into chemicals

    Chemical recycling breaks polyurethane foam down into polyol, one of the two main ingredients of new foam, whereas shredded foam can only be glued into products such as carpet underlay. In September 2021 Dow opened a plant in France with Orrion Chemicals Orgaform for its RENUVA program, able to take the foam of up to 200,000 mattresses a year, supplied by Eco-mobilier. In May 2023 the plant builder H&S Anlagentechnik commissioned a reactor for RetourMatras at Lelystad sized for the foam of 200,000 mattresses a year, and Repsol says its Recpur plant at Puertollano, Spain, started in 2024 to treat 2,000 tonnes of foam a year. For scale, California alone collected 1,560,655 mattresses in 2024.

    LessonFoam is getting harder to recover; a study for MRC found that California recyclers' foam recovery fell from 82.4% to 63.0% by 2025, because more mattresses use layered and latex foams held together with staples or glue.

    corporate.dow.comrenewable-carbon.eurepsol.commattressrecyclingcouncil.org

    Credit

    Dow and Orrion Chemicals Orgaform; Eco-mobilier; H&S Anlagentechnik and RetourMatras; Repsol with RAMPF Eco Solutions

Watch for

  1. New Dutch collection targets

    Dutch mattress producers have agreed, with the government, to collect at least 75% of discarded mattresses for recycling by 2028, against 63% in 2025, aiming for 80% by 2030; to make at least 80% of the materials available for new products from 2028, aiming for 85% by 2030; to grow drop-off points from 386 to at least 700; and, from 1 November 2026, to include mattresses from hotels, hospitals and holiday parks. The terms bind every producer until 31 October 2031.

    Achieved whenMRN's report for 2028, checked by the ministry, shows at least 75% collected and at least 80% of materials going into new products.

    rijksoverheid.nl

    Claimed by

    Stichting Matras Recycling Nederland, for Dutch mattress producers, with the Ministry of Climate and Green Growth, October 2026

Open

  1. 01

    Mattress type at the dock

    A camera station at a recycler's unloading dock that photographs each incoming mattress and its law label (the sewn-on tag, required by state bedding laws, that lists the filling), and a program that names the type, so the mattress goes to the right line: all-foam, pocket coil, Bonnell coil (open coils linked by wire), latex, topper, or box spring with a wooden frame.

    The brief
    Credit · unclaimed
  2. 02

    A residue log per mattress

    A tablet log at the dismantling table that records, for each mattress, its type and size, the weight of each output (steel, foam, quilt panel, wood and residue), and why any part went to landfill (glued, stapled, wet, soiled, bedbugs, or no buyer), published as open data so anyone can see what each mattress type yields.

    The brief
    Credit · unclaimed

Open 01 · the brief

Mattress type at the dock

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A camera station at a recycler's unloading dock that photographs each incoming mattress and its law label (the sewn-on tag, required by state bedding laws, that lists the filling), and a program that names the type, so the mattress goes to the right line: all-foam, pocket coil, Bonnell coil (open coils linked by wire), latex, topper, or box spring with a wooden frame.

Why it is still open

RetourMatras's machine line takes foam and pocket-spring mattresses, but staff pick out wood-framed box springs and toppers by eye, and those take about 15 minutes each by hand against 50 seconds on the machine. MRC's 2021 counts of mattress types were done by hand, and none of the 30 completed research reports MRC listed in November 2026 deals with cameras, sensors or automation. Searches in November 2026 found camera sorting for textiles and plastics, but no published classifier for whole mattresses at intake.

circular.kk.dkmattressrecyclingcouncil.org

Built with what exists

A phone or Raspberry Pi camera on a stand; an AI model that reads images, such as Claude or Gemini, to transcribe the label and describe what it sees (thickness, edge, a wooden frame), which models can now do for a photographed label and a photo of the mattress in one step; a classification model such as Gemini Decision 1 (Notes: "A thousand questions, one pass") to sort the transcribed text into types; Python with OpenCV and scikit-learn to train a small model on the logged photos; a shared spreadsheet as the log.

  1. First step

    Ask one recycler under contract to MRC or Ecomaison for permission to photograph 50 incoming mattresses and their labels, and write down the dismantler's type call for each one.

  2. Done looks like

    500 mattresses at one recycler classified, with the dismantler's record as the right answer; a published table of hits and misses; at least 95% agreement on type, and no more than 1 in 100 wood-framed box springs sent to the machine line.

Open 02 · the brief

A residue log per mattress

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tablet log at the dismantling table that records, for each mattress, its type and size, the weight of each output (steel, foam, quilt panel, wood and residue), and why any part went to landfill (glued, stapled, wet, soiled, bedbugs, or no buyer), published as open data so anyone can see what each mattress type yields.

Why it is still open

MRC's Oregon report says recyclers do not track landfilled material by type, and the public data come from one-off studies: MRC's 2021 composition study took apart four units of each size and type at one California facility, and its 2025 residue study sorted 14,465 pounds of residue at two recyclers without linking it back to mattress type.

oregon.govmattressrecyclingcouncil.org

Built with what exists

A tablet running KoboToolbox or Google Forms; a hanging digital scale; phone photos; an AI language model to sort free-text reasons into fixed categories; a shared spreadsheet.

  1. First step

    Shadow one dismantler for a shift as an observer, in the site's protective gear and with a paper form listing the outputs and reasons, and time how long each entry takes.

  2. Done looks like

    300 mattresses logged over four weeks at one site, each with type and output weights; logged weights match the site's own weigh tickets for the same period within 5%; a table of material yield per mattress type published under an open license.