Industries / Mining and materials / Steel and metals / Machine shops
Inspection
Inspection proves that parts match the drawing, by measuring their sizes, shapes and positions against the tolerances, the allowed variation, written on it.
7
Milestones achieved, from 1848 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1848
A screw measures the part
A micrometer measures size by turning a fine screw until its spindle closes on the part. The French inventor J. Palmer patented his design on 7 September 1848, by the Science Museum Group's record. Joseph R. Brown and Lucien Sharpe of Brown & Sharpe saw it at the Paris Exposition of 1867, bought one and took it back to the United States, and the hand-held version their company made is, in the museum's words, the origin of "the modern hand held micrometer gauge". In Japan, Yehan Numata set up a laboratory in Tokyo in 1934 to make micrometers at home and succeeded in 1936, by the account of the company it became, Mitutoyo.
collection.sciencemuseumgroup.org.ukkh.mitutoyo.com.sgwww2.mitutoyo.co.jp
Credit
J. Palmer; Brown & Sharpe; Yehan Numata (Mitutoyo)
1905
Gauges that pass or fail
A limit gauge does not measure a part; it shows whether the part lies between its two limits, because the GO end must fit and the NO GO end must not. The Bureau of Indian Standards credits "the late W. Taylor, who first laid it down in 1905" with the rule now called the Taylor principle. The GO gauge for a hole should be a full plug as long as the fit, so it checks size and shape together, while the NO GO gauge should touch the hole at only two opposite points, so it checks one size at a time.
Credit
W. Taylor
1940
Tolerances drawn as geometry
Geometric dimensioning and tolerancing (GD&T) is a set of drawing symbols that state how far a feature's shape, angle and position may stray, not only its size. Stanley Parker's report "Notes on Design and Inspection of Mass Production Engineering Work" was published in 1940 by the Gauge Design Drawing Office of the Naval Ordnance Gauge Factory in Sheffield, England; F. H. Rolt later wrote that it led the British Admiralty to set up a committee in 1942. The US military standard MIL-STD-8 appeared in 1949 and the American standard ASA Y14.5 in 1957; MIL-STD-8C was cancelled in 1980 in favor of Y14.5.
Credit
Stanley Parker; F. H. Rolt's committees; the history is David MacMillan and Rollande Krandall's
2000
First parts get reports
A first article inspection checks the first part made from a new or changed drawing against every requirement on it, before production goes on. The aerospace standard AS9102 set out how to do and record one; it was first published in 2000, revised in 2004 and 2014, and revised again as Rev C on 23 June 2023. Its three forms cover part number accountability, product accountability and characteristic accountability, the last being a line for each requirement on the drawing. Numbering every characteristic, called ballooning, still takes two to eight hours by hand, by the software maker Net-Inspect's estimate.
Credit
the aerospace industry's AS9102 standard
2005
X-rays measure dimensions
Computed tomography (CT) builds a 3D image from many X-ray views, so it can measure inner and outer surfaces of a part at once without cutting it open. Werth Messtechnik of Giessen, Germany, says its TomoScope of 2005 was the first machine with CT developed specifically for coordinate metrology, the measuring of points on a part to find its sizes and positions. In July 2013 Germany's national accreditation body, DAkkS, accredited Werth's calibration laboratory as the first of its kind for measuring machines with X-ray tomography sensors, by Werth's account, and Werth says it was the only one until 2018.
Credit
Werth Messtechnik
2020
One format for inspection data
The Quality Information Framework (QIF) is a free XML format that carries measurement plans, results, part geometry and product and manufacturing information (PMI), the tolerances attached to a 3D model, so one program's inspection data can be read by another. It was created by the Digital Metrology Standards Consortium (DMSC), which also maintains DMIS, a language for programming measuring machines. ISO published QIF 3.0 as ISO 23952:2020, the DMSC announced in August 2020. Metrology News wrote in July 2025 that many companies still rely on 2D drawings or poorly annotated models, and that wider use of STEP AP242 and QIF is needed.
Credit
Digital Metrology Standards Consortium; ISO
2023
Holes drilled out of place
On 23 August 2023 Boeing said that "during factory inspections, we identified fastener holes that did not conform to our specifications" in the aft pressure bulkhead, the dome that seals the rear of the cabin, on some 737s. Spirit AeroSystems, which builds 737 fuselages, said the holes were elongated, that only units from some of its several bulkhead suppliers were affected, that it had changed its manufacturing process, and that units already in production would be reworked. The FAA said the problem was not a safety threat; Boeing said it would delay some deliveries.
LessonHoles drilled wrong at a supplier's supplier reached Boeing's factory before anyone caught them, where the fix meant rework on aircraft already being built.
Credit
a failure; Spirit AeroSystems and an unnamed supplier; found by Boeing's inspectors
Watch for
Measuring programs written from CAD
A coordinate measuring machine (CMM) needs a program that says which points to touch and in what order, and inspectors usually write it by hand. Hexagon says its Autonomous Metrology Suite removes all coding from CMM work, that its Metrology Mentor app "automatically generates ISO- and ASME-compliant inspection programs directly from CAD", and that programming "could be reduced from days to hours". It gave no measured figures.
Achieved whena user or an outside lab publishes programming time and measured results for auto-generated programs against expert-written ones on stated parts.
Claimed by
Hexagon, June 2025
AI balloons the drawing
Net-Inspect said in August 2026 that its Auto-Balloon feature, which it says is available now, uses AI text reading to pull dimensions, GD&T callouts, notes and tolerances off a drawing and fill in the AS9102 forms; it gives no accuracy figure. GroundControl's buyer's guide of August 2026 cites customers' figures for faster first article work (a "156% increase in FAI throughput" at AdvancedPCB, 50 to 70% shorter inspections at Lake County Tool Works) but no accuracy figure, and tells buyers to "send the vendor the ugliest scanned print in your active job list and count what it misses".
Achieved whenan independent test publishes how many characteristics each tool misses on a shared set of drawings, including scanned ones.
Claimed by
Net-Inspect and GroundControl, August 2026
Open
01
Every callout found, or flagged
A public set of mechanical drawings, each with a complete list of its characteristics in the layout of AS9102 Form 3, made separately by two inspectors and reconciled, plus a scoring script that reports for each drawing whether a ballooning tool found every requirement. A single missed callout is a missed inspection, so the score that matters is the share of drawings with no misses, not the average per callout.
The briefCredit · unclaimed02
An open inspection planner
Open software that reads a 3D model with its tolerances, in STEP AP242 or QIF, and writes a measuring-machine program in DMIS. Run it on a real CMM at a university or shop and compare it with a program written by an experienced inspector on the same parts.
The briefCredit · unclaimed
Open 01 · the brief
Every callout found, or flagged
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of mechanical drawings, each with a complete list of its characteristics in the layout of AS9102 Form 3, made separately by two inspectors and reconciled, plus a scoring script that reports for each drawing whether a ballooning tool found every requirement. A single missed callout is a missed inspection, so the score that matters is the share of drawings with no misses, not the average per callout.
Why it is still open
AI ballooning is sold with no published accuracy, and GroundControl's own guide tells buyers to count misses themselves. Muhammad Tayyab Khan, Seung Ki Moon and colleagues (2024 to 2026) report per-item precision and recall for extracting GD&T and dimensions on sets of 400, 1,367 and 1,406 drawings; their May 2025 paper calls its set in-house. MechVQA, an ICML 2026 benchmark, released 1,185 question-and-answer pairs about mechanical drawings, which test understanding by questions, not complete lists. On Hugging Face, the set ecado/rfq-engineering-drawings (April 2026) pairs 600 drawings with full lists of their dimensions, GD&T callouts, finishes and notes, but its card says nothing about where the drawings come from or how the lists were checked. A GitHub search for "ballooning drawing" found two repositories with no data.
gndctl.comarxiv.orgarxiv.orgarxiv.orgarxiv.orggithub.comhuggingface.co
Built with what exists
Drawings made from NIST's 11 free test models, which carry their GD&T as PMI and may be used without restriction, and from open-hardware projects with open licenses; Label Studio for the lists; open vision-language models such as Microsoft's Florence-2 and the MechVL-4B model released with MechVQA; a short Python scoring script.
First step
Have two people balloon ten drawings by hand, independently, and compare their lists to set the rules for the answer key.
Done looks like
300 drawings, including 100 scanned paper prints, each list checked by two inspectors, with at least three tools scored. The published table gives each tool's share of drawings with zero misses and every missed callout.
Open 02 · the brief
An open inspection planner
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Open software that reads a 3D model with its tolerances, in STEP AP242 or QIF, and writes a measuring-machine program in DMIS. Run it on a real CMM at a university or shop and compare it with a program written by an experienced inspector on the same parts.
Why it is still open
The tools that write CMM programs from models are closed and sold by measuring-machine makers, such as Hexagon's Metrology Mentor, and Metrology News wrote in July 2025 that "the dream of 'one-click' CMM program generation remains a dream for most manufacturers". Research did the job two decades ago from simpler inputs: NIST's Feature-Based Inspection and Control System (FBICS), described by Thomas Kramer and colleagues in 2004, planned inspections of prismatic parts and wrote the measuring programs in DMIS, but it started from a feature-based description of the part, not from the tolerances attached to a CAD model, and NIST's page for the report mentions no release of the software. The closest recent research, by Khan and colleagues (February 2026), links drawing callouts to the 3D features they apply to, with an F1 score of 86.29% on 20 real part-and-drawing pairs, and stops before writing a program. A GitHub search for "dmis cmm" found no open program generator. Free test parts exist: NIST's model-based enterprise project published 11 test models with tolerances in STEP AP242 that may be used "without any restrictions", but they were built to test CAD software, and NIST's page reports no measuring programs for them.
metrology.newsarxiv.orgdigitalengineering247.comnist.govnist.gov
Built with what exists
NIST's free test models with PMI, as STEP AP242 files; pythonOCC to read the geometry; the free QIF and DMIS specifications from the DMSC; a language model to choose which points to probe; a CMM borrowed from a university lab.
First step
Download one NIST test model, list every characteristic an inspector would check, and compare that list with the PMI in its STEP file.
Done looks like
On ten machined test parts, the generated programs measure every toleranced feature, run with no probe collisions, and agree with the expert-written programs within the CMM's stated uncertainty on 95% of characteristics, with all results published.