BRENNEN

Industries / Consumer goods / Textiles and apparel / Leather goods

Stitching and assembly

Assembly is turning cut pieces into a product: thinning the edges, called skiving, gluing and folding them, joining them on a sewing machine or by hand with two needles, the saddle stitch, and fitting buckles, zips and other hardware.

4

Milestones achieved, from 1880 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1880

    A machine for waxed thread

    A lockstitch joins a top thread and a bottom thread inside the material. Duncan H. Campbell patented a waxed-thread sewing machine in September 1880 and again in January 1882, and the Campbell Machine Company of Pawtucket, Rhode Island, organized in 1880, built what a US Department of the Interior survey calls "the first machine capable of forming a lock-stitch with wax thread". It was used by shoe and harness makers, made up to 400 stitches a minute in a skilled operator's hands, and sold well enough in Europe for a branch to open in Leicester, England.

    fiddlebase.com

    Credit

    Duncan H. Campbell

  2. 2024

    A court enters Dior's workshops

    Milan prosecutors began investigating four workshops in March 2024, two of them leather goods makers, Pelletterie Elisabetta Yang and New Leather, that made bags for Manufactures Dior, Dior's Italian production company. Workers there slept in the warehouse and worked among solvents and flammable glues on machines altered to run faster, and a bag sold for €2,600 in Dior's stores had cost €53 to make, by the investigators' account. The Milan court placed Manufactures Dior under judicial administration for failing to check its suppliers' compliance with labour law, after similar orders against Alviero Martini and Giorgio Armani Operations; all three orders were later lifted early after the companies made changes.

    nssmag.comthefashionlaw.com

    Credit

    the Milan Tribunal and prosecutors

  3. 2025

    Valentino bags at €35

    In May 2025 the Milan court placed Valentino Bags Lab under judicial administration. Its supplier Bags Milano, whose only client since 2018 had been Valentino, made about 4,000 bags a month at €35 to €75 each that sold for €1,900 to €2,200, and allegedly passed work on to other Chinese-owned workshops, as The Fashion Law reported.

    LessonThe court held the brand's unit at fault for failing to oversee its suppliers, even though neither Valentino nor Valentino Bags Lab faced a criminal investigation.

    thefashionlaw.com

    Credit

    the Milan Tribunal

  4. 2025

    A €2 million settlement

    In May 2025 Italy's competition authority closed a year-long investigation into "working conditions and compliance with the law at certain leather goods suppliers" of Dior. Dior was cleared of wrongdoing but must provide €2 million over five years to victims of exploitation, nss magazine reported.

    nssmag.com

    Credit

    Italy's competition authority (AGCM)

Watch for

  1. Robots that pair glued parts

    Galli, an Italian maker of leather goods machinery, says its Delta Vision prototype, a delta robot (an arm hung from three linked rods) built in-house, uses the company's camera system to find pre-glued pieces and lay one on another with millimetre accuracy, and that setting up a new gluing pattern on its machines now takes seconds.

    Achieved whena leather goods maker runs it in production and someone outside Galli reports how many paired pieces are rejected compared with hand work.

    mpastyle.it

    Claimed by

    Davide Galli, general manager of Galli, in MPA Style, January 2026

Open

  1. 01

    Robot saddle-stitches a strap

    A two-arm robot that saddle-stitches a leather strap as a saddler does: the strap held upright in a clamp, the holes punched in advance, a needle on each end of one waxed thread, both needles passed through each hole from opposite sides, and each stitch pulled tight before the next.

    The brief
    Credit · unclaimed
  2. 02

    Saddle stitch against lockstitch

    A published lab comparison of hand saddle-stitched and machine lockstitched leather seams made with the same thread, leather and stitch length: the load at which each breaks, and how far each opens after one stitch is cut and the seam is flexed.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot saddle-stitches a strap

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A two-arm robot that saddle-stitches a leather strap as a saddler does: the strap held upright in a clamp, the holes punched in advance, a needle on each end of one waxed thread, both needles passed through each hole from opposite sides, and each stitch pulled tight before the next.

Why it is still open

In 2024 Philipp Enzinger set out the problems in a blog post (two needles to coordinate, the force to push them through, the feel for tension) and wrote that saddle-stitched goods are still made by hand because no machine matches a person. ABB was granted a US patent in February 2026 for a two-arm robot that passes a needle between its arms to sew leather covers onto steering wheels by hand-style stitching, but it has published no trial results, and a search found no robot that saddle-stitches flat leather goods.

pcorvin.github.iopatents.google.com

Built with what exists

Two low-cost robot arms and Hugging Face's LeRobot software to record steered demonstrations and train on them (see the Note "No download"); NVIDIA's open GR00T 2 model, which NVIDIA says needs few demonstrations per task (see the Note "Five demonstrations per task"); Runway's Praxis-1, which has a checkpoint for two YAM arms, though LeRobot's fine-tuning for it is single-arm only so far (see the Note "Open robot model weights"); a wooden clamp; pre-punched straps; a small tensile tester or hanging scale.

  1. First step

    Build the clamp, punch ten straps, and record 50 steered stitches on the two arms.

  2. Done looks like

    20 filmed attempts, each on a 30 cm strap with at least 60 stitches, and a published tally of stitches finished with no person stepping in, the time per stitch, and the force to pull the seam apart against the same strap stitched by a saddler.

Open 02 · the brief

Saddle stitch against lockstitch

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published lab comparison of hand saddle-stitched and machine lockstitched leather seams made with the same thread, leather and stitch length: the load at which each breaks, and how far each opens after one stitch is cut and the seam is flexed.

Why it is still open

Leatherworkers often say a saddle stitch is stronger. In an October 2024 thread on Leatherworker.net one member argued that with the same thread and stitch length the strength should be equal, and another wrote that it was "only speculation without somebody putting the threads to a test on an industrial testing machine". A search found no controlled test.

leatherworker.net

Built with what exists

A tensile testing machine of the kind used for ISO 3376, the leather tensile test, which many university materials labs own; a lockstitch machine for heavy leather; one saddler; a motor-driven rig that bends the seam back and forth; a camera.

  1. First step

    Sew five matched pairs of seams and test them at a university lab.

  2. Done looks like

    30 seams of each kind in three leathers, with load curves and the opening length after one cut stitch and 10,000 bends, all published with photos.