Industries / Mining and materials / Chemicals and petrochemicals / Hydrogen production
Transport
Moving hydrogen from where it is made to where it is used: through pipelines, by truck or ship as a compressed gas or a liquid, or bound up in another chemical and released at the other end.
6
Milestones achieved, from 1940 to 2022.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1940
A network in the Ruhr
Chemische Werke Hüls was founded in 1938 by IG Farben and the Hibernia mining company, and in 1940 it opened a 12 km hydrogen pipeline link between its plant at Marl and the coal hydrogenation works at Scholven, according to the historians Ralf Banken and Ray Stokes, who worked from company archives. From 1954 the network grew to a detergent maker in Düsseldorf, Bayer's works at Uerdingen and Leverkusen and refineries in Cologne. By the 1990s it ran 210 km to 17 customer plants, through pipes 80 to 300 mm across at 10 to 25 bar.
LessonThe network grew where hydrogen was a by-product and many users sat close together, and each extension was built only when the pipe cost less than rail tank cars or making hydrogen on site.
Credit
Chemische Werke Hüls
2012
A 600-mile Gulf Coast system
Air Products joined its Texas and Louisiana hydrogen pipelines with a new 180-mile segment, placed onstream in August 2012. The result runs about 600 miles from the Houston Ship Channel to New Orleans, is fed by more than 20 hydrogen plants and can deliver over 1.2 billion cubic feet of hydrogen a day to refineries and petrochemical plants. The figures are Air Products'. The IEA counts around 5,000 km of hydrogen pipelines in operation worldwide, mostly privately owned and linking refineries and chemical plants.
Credit
Air Products
2019
Hydrogen blended into homes
From October 2019 to spring 2021, Keele University's private gas network in England carried natural gas with up to 20% hydrogen by volume to 100 homes and 30 university buildings, with permission from the UK Health and Safety Executive. A second trial at Winlaton, run by Northern Gas Networks on a public network, supplied the same blend to 668 houses, a school, several small businesses and a church from August 2021 to June 2022. The project reports that laboratory tests on gas appliances and network materials found that blends of up to 20% by volume do not interact negatively with existing materials.
Credit
the HyDeploy project, with Cadent, Northern Gas Networks and Keele University
2020
Hydrogen carried in MCH
The AHEAD consortium of Chiyoda, Mitsubishi Corporation, Mitsui & Co. and NYK Line made hydrogen in Brunei and bound it into methylcyclohexane (MCH), a liquid organic hydrogen carrier: a liquid that takes up hydrogen in one plant and gives it back in another. It shipped the MCH to Japan, where Toa Oil's refinery in Kawasaki released the hydrogen and blended it into fuel for the gas turbines of the 80 MW Mizue power station. POWER magazine reported in June 2020 that the chain was supplying the turbines, with a goal of at least 210 tonnes of hydrogen a year. Chiyoda says MCH holds 530 times more hydrogen per unit volume than hydrogen gas and can use existing oil tanks and conventional tankers, and it calls the project the world's first global hydrogen supply chain demonstration.
Credit
Chiyoda and the AHEAD partners, with support from Japan's New Energy and Industrial Technology Development Organization (NEDO)
2021
Small blends still crack steel
At Sandia National Laboratories, fatigue cracks in X52 pipeline steel grew more than ten times faster than in air, at high loads, in a gas of 3% hydrogen in nitrogen at 3.4 MPa, where hydrogen's own share of the pressure, its partial pressure, is only about 0.1 MPa. The steel's resistance to fracture also fell. The authors wrote that the effect follows hydrogen's partial pressure, not its percentage in the blend, and that design curves already in the ASME pressure vessel code (Code Case 2938) predicted the crack growth. For the transmission pipe they assessed, a crack nearly through the wall would still not cause a rupture from internal pressure.
LessonNo blend is too small to matter for steel, so operators must check fatigue for any hydrogen share.
Credit
Joseph Ronevich and Chris San Marchi, Sandia (ASME Pressure Vessels and Piping Conference, 2021)
2022
Liquid hydrogen by sea
The Suiso Frontier, a 116-meter prototype ship built to test carrying liquid hydrogen by sea, loaded liquid hydrogen made from Latrobe Valley coal at the Port of Hastings in Victoria, Australia, in January 2022. Its arrival in Kobe, Japan, in February completed the pilot of the Hydrogen Energy Supply Chain (HESC) project. On 25 January 2022, while the ship was berthed, a flame briefly came out of the stack of its gas combustion unit. Australia's Transport Safety Bureau found that valves made for direct current had been fitted on a 230 V alternating current supply, and that automated safety controls meant to catch the fault "were not effective." In December 2024 Kawasaki Heavy Industries said the commercial demonstration would take place in Japan instead of Australia, and in September 2025 J-Power began dismantling the Victorian pilot plant.
LessonA first voyage proved the ship could carry liquid hydrogen, but no export trade followed, and the next phase moved home to Japan.
bairdmaritime.comhydrogenenergysupplychain.comhydrogenenergysupplychain.com
Credit
Japan Suiso Energy (Kawasaki Heavy Industries and Iwatani) and J-Power, with HESC partners
Watch for
Ammonia cracked back to hydrogen
Ammonia, which is easier to ship than hydrogen, can be split back into hydrogen and nitrogen at the port of arrival. Air Liquide says it started a pilot unit at the Port of Antwerp-Bruges, Belgium, in November 2025 that can process about 30 tonnes of ammonia a day, reports a yield of about 139 kg of hydrogen per tonne of ammonia in one operating mode, and calls it a world first. It plans a larger plant, ENHANCE, to make about 30,000 tonnes of liquid hydrogen a year, backed by a €110 million grant from the EU Innovation Fund.
Achieved whenan outside party, such as a customer or a regulator, reports the unit's measured output, purity and running hours.
Claimed by
Air Liquide, November 2025, as reported by the Ammonia Energy Association
A network waits for users
Hynetwork Services, which is building the Netherlands' national hydrogen network, says the network will have relatively few users in its first years, so early users could face very high transport tariffs unless a new financing model spreads the costs over a longer period. It plans its investment decisions for early 2027 and cites an assessment by the research institute TNO that the early deficits can in nearly all cases be recovered within 30 years.
Achieved whenthe network carries hydrogen to paying customers at approved tariffs, as reported by the regulator or the customers.
Claimed by
Hynetwork Services, September 2026
Open
01
Crack-growth data from every lab
An open table of every published fatigue crack growth test of pipeline steels and their welds in hydrogen gas or blends, read off the published figures, with the test conditions (steel grade, hydrogen partial pressure, load ratio, frequency), and a check of whether the design curves in the ASME B31.12 hydrogen piping code bound each test.
The briefCredit · unclaimed02
Blend tests in one table
How much hydrogen a gas grid can carry is set partly by the boilers, cookers and heaters at the end of it. Build one machine-readable table of every published test of household and commercial gas appliances on hydrogen and natural gas blends, with the appliance type and burner design, the hydrogen share, and each result (flashback, where the flame runs back into the burner; flame lift; ignition; carbon monoxide; nitrogen oxides; heat output), each linked to its report page. Then publish, for each blend share, which kinds of appliance had which problems.
The briefCredit · unclaimed
Open 01 · the brief
Crack-growth data from every lab
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open table of every published fatigue crack growth test of pipeline steels and their welds in hydrogen gas or blends, read off the published figures, with the test conditions (steel grade, hydrogen partial pressure, load ratio, frequency), and a check of whether the design curves in the ASME B31.12 hydrogen piping code bound each test.
Why it is still open
The largest open set found holds digitized NIST curves for three steels, X52, X70 and X100. A 2026 pilot that used it found that average coverage hid failures on single held-out curves and called its 8 curve files too few for a guarantee. The Sandia authors of the 2021 blend study wrote that more testing at different partial pressures, with replicates, is needed. The IEA notes that today's hydrogen pipelines run at steady flow, while planned networks will have to handle pressure swings, which is what drives fatigue.
Built with what exists
WebPlotDigitizer to read curves from figures; Python with pandas and scikit-learn; Sandia's open-source HELPR software, which applies the code's curves to pipelines; a document-reading AI model to pull test conditions from papers for a person to check.
First step
List every paper reporting crack growth in hydrogen gas for API 5L pipeline steels, and digitize five curves from laboratories other than NIST.
Done looks like
At least 40 curves from at least 5 laboratories, each traced to a figure or table; the share of points above the code curve published for each curve; a second person re-reads 5 curves and matches the first reading to within 10%.
Open 02 · the brief
Blend tests in one table
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
How much hydrogen a gas grid can carry is set partly by the boilers, cookers and heaters at the end of it. Build one machine-readable table of every published test of household and commercial gas appliances on hydrogen and natural gas blends, with the appliance type and burner design, the hydrogen share, and each result (flashback, where the flame runs back into the burner; flame lift; ignition; carbon monoxide; nitrogen oxides; heat output), each linked to its report page. Then publish, for each blend share, which kinds of appliance had which problems.
Why it is still open
The EU's THyGA project tested about 100 residential and commercial appliances in various blend scenarios and made its technical reports public, but as separate PDF reports by appliance group. Its newsletter summarizes that the atmospheric burners tested coped with 30% hydrogen and that problems in premixed appliances came mainly from how they were adjusted. HyDeploy reports its laboratory tests separately. Searches found no single table that combines results across programs.
Built with what exists
The published THyGA, HyDeploy and other national test reports; a document-reading AI model to pull test tables out of PDFs for a person to check (see the Note "Seven more flagged"); Python; a CSV file on GitHub or Zenodo.
First step
Enter the long-term results from THyGA's report D3.9, seven appliances run for more than 2,500 hours each on 30% hydrogen, as the first rows.
Done looks like
At least 300 test results from at least four test programs in at least three countries, each traced to a report page, with a second person re-checking a random 10% and a summary chart of problems by blend share and burner type.