BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Hydrogen production

Making it from gas and coal

Breaking natural gas, coal or oil apart with steam, oxygen or heat to release their hydrogen, which is how almost all of the world's hydrogen is made today.

6

Milestones achieved, from 1961 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1961

    Reforming light oil

    Steam reforming passes a hydrocarbon and steam over a hot catalyst in metal tubes to release hydrogen. ICI commissioned the first commercial steam reformer for naphtha, a light oil fraction, at its Heysham works in Lancashire, England, in 1961, soon followed by one at Billingham. Its advances were removing all sulfur from the naphtha and adding potassium carbonate to the catalyst so that carbon did not build up on it. ICI's aim was to replace coal-fired gas producers for ammonia hydrogen, which had become too costly in capital and labor. British gas boards adapted the design to make town gas from 1964, and by 1970 about half of Britain's gas came from steam reformers; conversion to North Sea natural gas began in 1968, and these plants soon disappeared.

    LessonA plant built around one feedstock can lose its market within a decade when a cheaper feedstock arrives.

    fredstarr.com

    Credit

    ICI at Heysham and Billingham, with the catalyst chemist Denis Dowden; account by the metallurgist Fred Starr

  2. 2013

    Capture at Port Arthur

    Air Products fitted carbon capture to two large steam methane reformers at the Valero refinery in Port Arthur, Texas, with US Department of Energy funding. Its vacuum swing adsorption units raise the carbon dioxide in the reformers' process gas from about 15% to at least 98% and send it by pipeline for enhanced oil recovery, where CO2 is pumped into an oil field to push out more oil. The system came on stream in December 2012 and reached full production in March 2013, and a May 2013 test showed a rate equal to almost 1 million tons of CO2 a year. From US EPA data, the Institute for Energy Economics and Financial Analysis (IEEFA) found that in 2014–2017 the plant captured on average less than 50% of the CO2 made by its hydrogen production, and none of the CO2 from the on-site power that runs it.

    LessonCapturing only the concentrated process stream leaves much of a plant's CO2, including that from burning fuel for heat and power, in the air.

    osti.govieefa.org

    Credit

    Air Products, the US Department of Energy and Denbury

  3. 2015

    Quest stores CO2

    Shell's Quest project captures CO2 from the three hydrogen units of its Scotford upgrader near Edmonton, Alberta, which adds hydrogen to oil-sands bitumen, and injects it into dedicated storage underground rather than an oil field. The IEA counts more than 9 million tonnes of CO2 stored since start-up in 2015. How much it captures depends on what is counted: Shell reports about 80% of the hydrogen units' process stream; IEEFA puts it at 68.3% once the energy for capture and storage is included; Global Witness (2022) put it at 48% of the plant's CO2, and 39% counting other greenhouse gases. Shell called that analysis "simply wrong" and said Quest was designed to capture about a third of the site's CO2. Quest also reported in 2020 that unstable flames at higher capture rates had damaged the reformer burners.

    LessonTaking more CO2 out of the gas changes how the reformer itself runs, so high capture rates have to be shown in yearly operation, not assumed from the design.

    iea.blob.core.windows.netieefa.orgcnbc.com

    Credit

    Shell Canada, with $654 million of its $1 billion cost from Canadian governments (Global Witness's figure)

  4. 2020s

    Pyrolysis goes commercial

    Methane pyrolysis heats natural gas without oxygen so that it splits into hydrogen and solid carbon instead of CO2. Monolith's Olive Creek 1 plant in Hallam, Nebraska, does this with an electric plasma and makes carbon black, a black powder used in tires, along with hydrogen; Emily Beagle and Michael Webber described it as commercially operational in ASME's magazine in April 2026. They note that pyrolysis needs more natural gas per kilogram of hydrogen than steam reforming, because all the hydrogen comes from the methane, and leaves about 3 kg of solid carbon per kg of hydrogen, where steam reforming releases 5.5 kg of CO2.

    magazine.asme.org

    Credit

    Monolith

  5. 2025

    Capture at Donaldsonville

    CF Industries began capturing CO2 from the hydrogen-making units of its Donaldsonville, Louisiana, ammonia complex in July 2025, about 2 million tonnes a year. The IEA reports that the CO2 goes to enhanced oil recovery for now, with a move to dedicated storage planned, and that every hydrogen plant with capture operating at the end of 2024 captured only part of its emissions, the concentrated process CO2.

    iea.blob.core.windows.net

    Credit

    CF Industries, with ExxonMobil providing CO2 transport and storage

  6. 2025

    Blue hydrogen projects stall

    Blue hydrogen is hydrogen made from natural gas with the CO2 captured and stored. On 21 November 2025, ExxonMobil chief executive Darren Woods told Reuters the company had paused its planned plant at Baytown, Texas, designed to make 1 billion cubic feet of hydrogen a day, because too few customers would sign contracts to pay the extra cost of capture; ExxonMobil and its partners had spent about $500 million. The IEA reported that Air Products said in May 2025 that its large Louisiana project was not yet committed until it found enough buyers, and that its Alberta complex was delayed to late 2027 or early 2028 as its cost rose from $1.2 billion to $3.3 billion.

    LessonLow-carbon hydrogen costs more than the ordinary product, and plants are not built until buyers commit to pay the difference.

    pgjonline.comiea.blob.core.windows.net

    Credit

    ExxonMobil and Air Products, as reported by Reuters and the IEA

Watch for

  1. A 95% capture design

    CF Industries, JERA and Mitsui took an investment decision in April 2025 on Blue Point, an ammonia plant in Louisiana of 1.4 million tonnes a year that makes its hydrogen by autothermal reforming, a variant of reforming that burns part of the gas inside the reactor with oxygen. The IEA reports it is designed to capture about 2 million tonnes of CO2 a year, about 95% of the plant's emissions. CF said in its results for the second quarter of 2026 that construction at Modeste, Louisiana, would begin in August 2026, that the joint venture costs $3.7 billion, and that 2.3 million tonnes of CO2 a year will be stored through 1PointFive, an Occidental subsidiary, with first production in 2029.

    Achieved whenthe plant runs for a full year and public records, such as US EPA greenhouse gas data, show about 95% of its CO2 stored.

    iea.blob.core.windows.netbcinsight.crugroup.com

    Claimed by

    CF Industries, JERA and Mitsui, April 2025 and August 2026

  2. Pyrolysis at oil-company scale

    BASF and ExxonMobil signed a joint development agreement to build a methane pyrolysis demonstration plant at ExxonMobil's Baytown complex in Texas, able to make up to 2,000 tonnes of hydrogen and 6,000 tonnes of solid carbon a year. BASF says its test plant at Ludwigshafen, Germany, has started in experimental mode, and the companies say the process needs about five times less electricity than electrolysis. They gave no start date.

    Achieved whenthe demonstration plant publishes hours run, hydrogen output and the quality of its carbon, checked by an outside party.

    basf.com

    Claimed by

    BASF and ExxonMobil, November 2025

Open

  1. 01

    A yearly capture ledger

    A public table, updated every year, of how much CO2 each hydrogen plant with carbon capture actually captures, as a share of all the CO2 the plant emits, including fuel burned for heat and power. Start with the roughly 16 facilities the IEA counts and add new ones, such as Donaldsonville, as they start.

    The brief
    Credit · unclaimed
  2. 02

    Gas-field methane per plant

    For each large steam reforming plant in the United States, an estimate of the methane leaked upstream in producing and piping its gas, using the measured leak rate of the gas basin it most likely draws from, and the resulting range of carbon intensity in kilograms of CO2-equivalent per kilogram of hydrogen.

    The brief
    Credit · unclaimed

Open 01 · the brief

A yearly capture ledger

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table, updated every year, of how much CO2 each hydrogen plant with carbon capture actually captures, as a share of all the CO2 the plant emits, including fuel burned for heat and power. Start with the roughly 16 facilities the IEA counts and add new ones, such as Donaldsonville, as they start.

Why it is still open

Measured capture rates are rarely published. IEEFA wrote in 2023 that most capture facilities publish neither their capture rates nor the data needed to work them out, and it could estimate rates for only three commercial-scale hydrogen plants, none of which had captured 80% of its CO2. The IEA's 2025 count of low-emission hydrogen from these plants assumes 40–60% overall capture for gas-based plants and 90–95% for coal- and oil-based plants, rather than using plant-by-plant measurements. In September 2025 the US EPA proposed ending reporting for 46 of the 47 source categories in its Greenhouse Gas Reporting Program, the main public record for US plants.

energy.goviea.blob.core.windows.netcatf.us

Built with what exists

US EPA Greenhouse Gas Reporting Program data through its FLIGHT tool, downloaded and archived while it is still published; Quest's annual reports to the Alberta government; Canada's facility emissions data; company sustainability reports; a document-reading AI model to pull figures out of PDF reports for a person to check (see the Note "Seven more flagged"); Python.

  1. First step

    Download Port Arthur's facility records from EPA FLIGHT and reproduce IEEFA's finding of under 50% capture for 2014–2017.

  2. Done looks like

    For at least ten plants, the captured CO2, the total site CO2 and the resulting share for every year since start-up, each figure linked to its source, with a method note. An outside reviewer reproduces the numbers for three plants from the links alone.

Open 02 · the brief

Gas-field methane per plant

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

For each large steam reforming plant in the United States, an estimate of the methane leaked upstream in producing and piping its gas, using the measured leak rate of the gas basin it most likely draws from, and the resulting range of carbon intensity in kilograms of CO2-equivalent per kilogram of hydrogen.

Why it is still open

Plant-level studies so far use average upstream figures. Cho, Strezov and Evans (2022) used facility emissions data for 33 US reformers and found 9.35 kg CO2e per kg of hydrogen from direct emissions, rising to 11.2 kg with upstream emissions added. The IEA uses an average of about 1.8 kg CO2e per kg for upstream and midstream emissions, four times the 0.45 kg threshold for the top tier of the US hydrogen tax credit. GTI Energy's free HyPEC calculator lets a user set one upstream leak rate but does not tie plants to gas basins. Burns and Grubert (2021) matched gas-fired power plants to regional methane emissions, but searches found no study doing this for hydrogen plants.

researchers.mq.edu.auiea.blob.core.windows.nethypec.gti.energyapi.crossref.org

Built with what exists

EPA greenhouse gas data for hydrogen production facilities, US Energy Information Administration pipeline maps, published basin methane loss rates from aircraft and satellite studies, Carbon Mapper's public methane plume data, Argonne National Laboratory's 45VH2-GREET model; Python and a web map.

  1. First step

    List the hydrogen production facilities reporting to EPA for the latest year and tag each with its state and nearest interstate gas pipeline.

  2. Done looks like

    A table and map for at least 30 US reformer plants, each with a low, central and high carbon-intensity estimate and its stated assumptions, compared with the 0.45 kg threshold.