Industries / Health / Medical devices / Hearing aids
Devices
Making hearing aids means building the hardware itself: the case and its style, the microphone, amplifier and receiver (the tiny loudspeaker), and the links to phones and public sound systems.
7
Milestones achieved, from 1800 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1800
A trade in hearing aids
Frederick C. Rein founded F.C. Rein and Son in London in 1800. The Bernard Becker Medical Library at Washington University calls it the earliest firm known to make hearing aids on a commercial basis. Its products used no electricity: ear trumpets, acoustic urns, speaking tubes for churches and, in 1819, an "acoustic throne" for King John of Portugal with sound channels hidden in the armrests. The firm stayed in business until 1963.
Credit
Frederick C. Rein
1903
Electric aids from telephones
The Akouphone Company of Mobile, Alabama, founded by Miller Reese Hutchison and James H. Wilson, made what the Becker Library calls perhaps the first electric hearing device in 1898–99. The Akoulallion was a table instrument with a carbon microphone, the telephone transmitter of the day, and sold for $400. A smaller Akouphone followed in 1900 at $60, but neither sold well, and the company went into receivership around 1901. In 1903 Hutchison and Willard S. Mears formed the Hutchison Acoustic Co., whose Acousticon was worn on the body.
Lessonthe $400 table instrument failed, but the body-worn Acousticon line was still being made in 1927 and 1928, when the library's Model 28 and Model 56 examples date from.
Credit
Miller Reese Hutchison
1953
Transistors replace tubes
English firms put small vacuum tubes into the first wearable aids in the mid-1930s, and the Aurex of May 1938 was the first wearable aid built with tubes made in the US. Tubes needed bulky batteries, though. The Computer History Museum says the first consumer product in the US to use a transistor was a $229.50 Sonotone hearing aid of 1952, with one transistor and two tubes. Raytheon supplied three CK718 transistors for an all-transistor aid that Maico brought out in 1953, and by 1954, 97% of all hearing aids used transistors only. The Becker Library credits Microtone instead with the first all-transistor aid, in January 1953. It cites American Hearing Aid Association figures of 325,000 all-transistor aids among the 335,000 sold in the US in 1954.
Credit
Sonotone; Raytheon, under vice-president Norman Krim; Maico; Microtone
1955
Aids move to the ear
Transistors made new styles practical. The Becker Library calls Dahlberg's D-10 Miracle-Ear of 1955 the first "in-the-ear" aid: a half-ounce shell, worn at the ear, holding the battery, a three-transistor amplifier, the microphone and the receiver. Aids built into eyeglass frames, first sold by Otarion and Akumed in 1954, made up about half of US hearing aid sales by 1959. Zenith's Arcadia of 1964 was the first behind-the-ear (BTE) aid with an integrated circuit. Smaller parts later moved aids into the ear canal: in-the-canal models arrived in 1983, and Starkey and Argosy introduced completely-in-the-canal (CIC) aids in 1993–94.
Credit
Dahlberg (later Miracle-Ear); Otarion and Akumed; Zenith; Starkey; Argosy
2003
Receivers move into the canal
A receiver-in-canal (RIC) aid sits behind the ear and puts its receiver in the ear canal on a thin wire, usually with no custom earmold. Hearing Review dates the style's rise to the ReSound Air and the Sebotek PAC in 2003 and to Vivatone in 2004. By the Hearing Industries Association's (HIA) counts, RICs were 56.7% of US hearing aid sales in early 2014 and 78.4% in 2019, and all behind-the-ear types together were 88.1%.
Lessonbecause most RICs need no custom earmold, experts cited by Hearing Review's editor in 2014 warned that hearing aids had become more open to commoditization, competition on price alone.
Credit
ReSound; Sebotek; Vivatone
2014
Streaming straight from a phone
On 24 February 2014 GN ReSound launched ReSound LiNX and Beltone First, which GN calls the first Made for iPhone hearing aids. They took phone calls, music and film sound directly from an iPhone, iPad or iPod touch over a 2.4 GHz radio link, with no remote control or streamer worn on the body. GN told MacRumors that it had worked with Apple on a protocol for the link and built a new processor to run it.
Credit
GN ReSound, with Apple
2024
Every phone must pair
On 17 October 2024 the US Federal Communications Commission (FCC) ruled that, after a transition of 24 to 42 months, every mobile handset model sold in the US must be hearing aid-compatible. All models must work acoustically. 85% must also couple to a telecoil, a small coil in an aid that picks up a phone's magnetic signal, and the other 15% must meet a new Bluetooth requirement. After 48 months only non-proprietary Bluetooth counts, for example Bluetooth LE Audio with its Hearing Access Profile. The FCC said this would address "certain handset models only being able to pair with certain hearing aids". Its Hearing Aid Compatibility Task Force put the share of handset models already compatible at about 93% in August 2022.
Credit
US FCC; its Hearing Aid Compatibility Task Force
Watch for
Broadcast sound in public places
Auracast is a Bluetooth LE Audio feature that lets one transmitter send sound to any number of compatible hearing aids, earbuds or receivers nearby without pairing. It can stand in for a hearing loop, a wire around a room that feeds the telecoils in aids. In October 2026 the Bluetooth Special Interest Group (SIG) said that all five major hearing aid makers, about 90% of the world market by its count, now sell aids that receive Auracast. It said aids from one maker can receive broadcasts from equipment supplied by another. In September 2025 Avantree, which sells Auracast transmitters, reported its units joining "across brands" at a Bluetooth industry event, but gave no figures. The Hearing Loss Association of America (HLAA) warns that hearing aids receive only "standard-quality" streams, and it expects an international standard for Auracast venues by late 2027.
Achieved whena lab with no tie to the makers publishes join rates and delays for aids from all five makers with transmitters from several vendors, or venues are checked against the expected standard.
Claimed by
Bluetooth SIG, October 2026
Open
01
Sweat tests that name brands
A published, repeatable durability test of hearing aids in sweat, humidity and heat, with every model named. At least five units of each of six models from four makers go through rounds of synthetic sweat spray, condensation and drying in a climate chamber. After every round, each aid's sound output is measured in a hearing aid test box.
The briefCredit · unclaimed02
Auracast across brands, measured
A bench test of Auracast reception. Aids from all five major makers and two over-the-counter brands sit in a coupler or on an acoustic manikin and receive standard-quality broadcasts from at least three makes of transmitter. Measure how many of 20 tries each aid joins a broadcast, the delay in milliseconds from transmitter input to aid output, and drop-outs per hour at 2, 10 and 25 m.
The briefCredit · unclaimed
Open 01 · the brief
Sweat tests that name brands
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A published, repeatable durability test of hearing aids in sweat, humidity and heat, with every model named. At least five units of each of six models from four makers go through rounds of synthetic sweat spray, condensation and drying in a climate chamber. After every round, each aid's sound output is measured in a hearing aid test box.
Why it is still open
The most detailed test found is the maker's own. In 2024 Phonak ran its Audéo L-R through 17 rounds of 20 hours each: synthetic sweat spray and condensation at 50 °C, then drying at 60 °C. It ran two rival brands alongside but did not name them. Phonak reported that 7 of its 10 aids still passed the acoustic tests at the end, while every aid of one rival had no output by round 11. The IP68 rating that most aids carry comes from immersion in clean fresh water, 1 m deep for 60 minutes in Phonak's case. Hearing Health Matters noted in 2020 that IP ratings are assigned with clean water, not sweat or rain. HearingTracker's 2026 guide to water-resistant aids picks them by IP rating and its own review scores, and reports that Starkey also runs its own sweat, salt-water and humidity tests. A Europe PMC search (November 2026) found no peer-reviewed study comparing moisture failure across brands.
audiologyblog.phonakpro.comhearinghealthmatters.orghearingtracker.com
Built with what exists
A climate test chamber, such as one from Weiss Technik or ESPEC; synthetic sweat made to ISO 3160-2 or EN 1811; a hearing aid test box with an IEC 60318-4 ear simulator or a 2 cc coupler, such as a Frye FONIX or an Audioscan Verifit 2; the ANSI S3.22 test method. Prescription aids would be set to their test settings by a university audiology lab, and over-the-counter models through their own apps.
First step
Run three rounds of the protocol Phonak published on two units each of two over-the-counter models, and publish the curves.
Done looks like
For at least 30 aids from six named models, output at 1 kHz and full-on gain curves after each of at least 17 rounds, with a survival chart and the raw data. A second lab reruns two models, and its average round of failure is within one round of the first lab's.
Open 02 · the brief
Auracast across brands, measured
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench test of Auracast reception. Aids from all five major makers and two over-the-counter brands sit in a coupler or on an acoustic manikin and receive standard-quality broadcasts from at least three makes of transmitter. Measure how many of 20 tries each aid joins a broadcast, the delay in milliseconds from transmitter input to aid output, and drop-outs per hour at 2, 10 and 25 m.
Why it is still open
The Bluetooth SIG and transmitter sellers claim that brands work together. The only cross-brand trial found, Avantree's at a Bluetooth industry event in 2025, says devices "joined quickly" with "low-latency audio" but publishes no numbers. HLAA says the venue standard is still to come, expected by late 2027. A Europe PMC search (November 2026) found no paper measuring LE Audio or Auracast delay in hearing aids.
Built with what exists
Nordic Semiconductor's nRF5340 Audio development kit, which runs as an LE Audio broadcast source with Nordic's open nRF Connect SDK; commercial Auracast transmitters; an Auracast-capable Android phone to choose the stream; KEMAR or another acoustic manikin with an IEC 60318-4 ear simulator; an audio interface, and Python to measure delay by lining up input and output signals.
First step
Set up one broadcast source, measure the delay into one aid on a coupler, and post the method.
Done looks like
A public table of at least 7 aid models against at least 4 transmitters, with join rate, median delay and drop-out rate for each pair, the raw recordings and the setup, repeated after one firmware update.