BRENNEN

Industries / Food, farming and forestry / Agriculture and farming / Grain elevators and storage

Loading trucks, trains, barges and ships

This is the outbound work: drawing grain from storage, weighing it, and loading it into trucks, rail cars, barges and, at export elevators, ships, along with getting enough cars and vessels to the elevator on time.

5

Milestones achieved, from 1976 to 2022.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1976

    Bribery brings federal export inspection

    Under the United States Grain Standards Act of 11 August 1916, grain was graded by inspectors licensed by the federal government but working for private and state agencies. From August 1974 federal indictments charged seven licensed inspectors in the New Orleans area with taking bribes, among other things to certify ships clean for loading, and later charges covered theft of grain, misgrading and short-weighing. By September 1975 a grand jury in New Orleans alone had indicted 48 people and 4 corporations on 265 counts, by figures in views filed with the 1976 House committee report, and a Government Accounting Office survey of 68 importers in 9 countries found buyers who believed they regularly received lower quality and weight than they paid for. The United States Grain Standards Act of 1976, signed on 21 October 1976, created FGIS inside USDA, made inspection at export ports the department's responsibility, and required that all grain moved into or out of an export elevator at an export port be officially weighed; the committee report calls this the first federal regulation of the weighing of export grain.

    LessonWhen graders and weighers depend on the trade they serve, buyers stop trusting the certificate, and the cure was officials with no stake in the grain.

    fordlibrarymuseum.govgovinfo.govlaw.cornell.edu

    Credit

    US Congress; USDA

  2. 2002

    Shuttle trains reshape elevators

    A shuttle train is 110 covered hopper cars loaded at one elevator and run as one unit to one destination, with no switching in yards on the way. In March 2002 testimony to a US Senate committee, the Upper Great Plains Transportation Institute (UGPTI) at North Dakota State University described BNSF's 110-car shuttle program, then being built. It estimated the variable cost of moving wheat from Hillsboro, North Dakota, to Portland at US$1,454 per car in a 110-car train from one elevator, against US$2,732 for a single car, 47% less. Only elevators that built track and loading capacity for whole trains could take part, and UGPTI's three case studies put the extra truck haul for the average bushel at 1.8 to 5.3 miles. BNSF says its grain trains grew from single boxcars to blocks of 26 and 52 hopper cars and then to 110, and that a 110-car train can now load or unload in under 10 hours.

    LessonBigger trains cut the railway's cost per car, but shifted cost to farm trucks and rural roads and left smaller elevators out.

    ugpti.orgbnsfnorthwest.com

    Credit

    BNSF Railway; UGPTI (Gene Griffin, Denver Tolliver, John Bitzan)

  3. 2014

    Canada sets weekly grain volumes

    Canada's Fair Rail for Grain Farmers Act, assented to on 29 May 2014, required Canadian National and Canadian Pacific each to move at least 500,000 tonnes of grain a week until 3 August 2014, subject to demand and the capacity of each corridor. A railway that fell short could be fined up to C$100,000 for each violation, with every day counting as a new one. The act let the government set later minimum volumes by order, let regulations set longer distances for interswitching (handing cars from one railway to another at a set rate), and let the Canadian Grain Commission arbitrate disputes over grain contracts. The volume rules were to lapse on 1 August 2016 unless Parliament extended them.

    laws-lois.justice.gc.ca

    Credit

    Parliament of Canada

  4. 2019

    Brazil's grain heads north

    Brazil's soybeans and corn once left mostly through southern ports such as Santos and Paranaguá. A study for USDA by Thiago Péra of the University of São Paulo's ESALQ-LOG group found that barges carried about 20% of Brazil's corn exports to port in 2019, up from about 3% in 2010, while rail's share fell from nearly 78% to 50%. In the first half of 2026, USDA counts 29 million metric tons of soybeans, nearly 42% of exports, shipped through the north and northeastern ports, against 58% through the south.

    ams.usda.govams.usda.gov

    Credit

    Brazil's grain exporters and northern port operators; measured by ESALQ-LOG and USDA's Agricultural Marketing Service (Delmy Salin)

  5. 2022

    A sea corridor for grain

    War had closed Ukraine's Black Sea ports. In July 2022 in Istanbul, Ukraine and Russia each signed the Black Sea Grain Initiative with Türkiye and the United Nations. A Joint Coordination Centre in Istanbul, staffed by all four, tracked ships along an agreed corridor, and joint teams inspected ships going to and from Odesa, Chornomorsk and Yuzhny/Pivdennyi. The UN counts over 32 million metric tons of grain and foodstuffs moved to 45 countries in close to 2,000 voyages, including over 725,000 metric tons of wheat shipped by the World Food Programme.

    LessonAn export route that rests on a deal between warring parties closes when the deal lapses; this one ended on 17 July 2023.

    un.orgun.org

    Credit

    United Nations; Türkiye; Ukraine; Russia

Watch for

  1. Robots open railcar lids

    To load a covered hopper car, a worker in a harness usually walks along the car's roof to open and close its lids. Rayhawk Technologies of Saskatoon says its gantry, which moves along three axes over the track, uses cameras and machine learning to find the latches in rain, snow and poor light and opens and closes the lids as cars pass under the loading spout. BetaKit reported two systems working near Saskatoon and three contracts for the first US installations, at FS Grain in Illinois, Dakota Midland Grain in North Dakota and an elevator in Minnesota. It reported no performance figures.

    Achieved whenan elevator or another party outside Rayhawk publishes a season of results: cars handled, lids missed or damaged, and the hours of work on car roofs removed.

    betakit.com

    Claimed by

    Rayhawk Technologies, February 2026

Open

  1. 01

    Forecast next week's car gap

    A public weekly forecast for western Canada of how many grain hopper cars shippers will order from each railway in the coming week and how many the railway will supply, scored against what happened each week of a crop year.

    The brief
    Credit · unclaimed
  2. 02

    Measure loadout dust again

    New emission factors for the dust that escapes when trucks, rail cars and barges are loaded at an elevator, measured from fixed points downwind with calibrated low-cost particle sensors, for loadouts with and without dust controls such as a cloth sock on the spout or choke loading (keeping the spout's end buried in the pile so grain does not fall freely).

    The brief
    Credit · unclaimed

Open 01 · the brief

Forecast next week's car gap

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public weekly forecast for western Canada of how many grain hopper cars shippers will order from each railway in the coming week and how many the railway will supply, scored against what happened each week of a crop year.

Why it is still open

The numbers come out after the fact. CN publishes each week the cars demanded, its capacity guidance (up to 7,800 cars a week outside winter) and the cars it shipped, and the Ag Transport Coalition, a shippers' group, compiles weekly fill rates. In early 2025 the railways supplied no more than 55% of the cars ordered for three weeks in a row, and outstanding orders passed 4,100, the most in at least two years by the coalition's analyst. Searches in November 2026 found weekly reports and commentary, but no published forecast of the coming week's shortfall.

cn.caproducer.com

Built with what exists

CN's weekly western Canadian grain reports (PDF); the Ag Transport Coalition's weekly reports; daily temperatures from Environment and Climate Change Canada; the Port of Vancouver's vessel line-up; Python with pdfplumber to read the PDFs; a gradient-boosted model such as LightGBM, with a plain regression as a check.

  1. First step

    Download CN's weekly reports for crop years 2023–24 to 2025–26 and put demand, capacity guidance and cars shipped into one table.

  2. Done looks like

    Forecasts posted before each week for at least 30 weeks of the 2026–27 crop year, with a mean absolute error in cars supplied at least 20% lower than a forecast that assumes next week equals this week, and the code and data public.

Open 02 · the brief

Measure loadout dust again

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

New emission factors for the dust that escapes when trucks, rail cars and barges are loaded at an elevator, measured from fixed points downwind with calibrated low-cost particle sensors, for loadouts with and without dust controls such as a cloth sock on the spout or choke loading (keeping the spout's end buried in the pile so grain does not fall freely).

Why it is still open

Air permits still use the US Environmental Protection Agency's AP-42 factors of March 2003, and Oregon's environment department notes that for some sources no PM10 test data exist, so it takes PM10 (particles under 10 micrometres) as a fixed 25% of total dust. The factors for inland elevators rest on a 1995 industry-funded program of 54 tests at three elevators handling four grains, later extended to barges and ships by Midwest Research Institute. In 2021 Débora Perazzoli and colleagues in Brazil used six low-cost SDS011 sensors, calibrated against a reference monitor, upwind and downwind of a grain conveyor belt at a port terminal to work out its PM10 emission rate, but not at loadouts. A search found no study that has measured grain loadouts with low-cost sensors.

oregon.govgaftp.epa.govcmascenter.org

Built with what exists

Alphasense OPC-N3 optical particle counters, which tracked a reference PM10 monitor closely during dust storms in Utah, where cheaper Plantower sensors read far too low; one TSI DustTrak monitor as the reference for calibration; a three-dimensional sonic anemometer for wind; WindTrax, free software that works back from downwind concentrations to an emission rate; tonnage from the elevator's scale tickets; Python.

amt.copernicus.org

  1. First step

    Run four low-cost sensors beside a DustTrak for a week in a shed with sieved grain dust to fit calibration curves, and ask one country elevator for permission to set sensors outside its loading area.

  2. Done looks like

    PM10 and PM2.5 factors in pounds per ton (and kilograms per tonne) from at least 30 truck and 10 rail car loadouts, with and without controls, each with its uncertainty, set beside the AP-42 values, and all readings public.