BRENNEN

Industries / Construction and property / Commercial and residential construction / Flooring

Wood and laminate

Wood and laminate flooring is the work of laying solid, engineered (layered) and laminate boards over a subfloor, fixing them with nails, glue or interlocking joints, and sanding and coating wood floors in place.

7

Milestones achieved, from 1905 to 2022.

0

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1905

    Electric sanders with dust bags

    Max L. Schlueter of St. Louis patented a floor-surfacing machine "intended for sandpapering the floor". An electric motor drove its sanding drums and an exhaust fan that blew the dust and scrapings into a sack. An earlier floor-surfacing patent, Henry McLoughlin's of 1899, planed the boards with a cutter turned by a hand crank.

    patents.google.compatents.google.com

    Credit

    Max L. Schlueter (US patent 798,455, filed December 1904, granted August 1905)

  2. 1941

    Layered boards patented

    Kährs, the Swedish flooring maker, says it was awarded a patent in 1941 for the multilayer floor, which it calls "today's modern engineered hardwood floor". An engineered board has a hardwood top layer glued over other wood layers, which move less with humidity than one solid board.

    kahrsgroup.com

    Credit

    Kährs, by its own history

  3. 1979

    Water replaces solvent finishes

    Bona, a floor-care company founded in Malmö, Sweden, in 1919, dates its first waterborne floor finishes to 1979. A waterborne finish carries its binder in water instead of an organic solvent. By 2025 a waterborne sanding sealer was a routine first coat: a US flooring contractor wrote that most finish suppliers offer one, and that it prevents "edge bonding", where the finish glues boards together so that winter shrinkage collects in a few wide gaps instead of many small ones.

    bona.comjlconline.com

    Credit

    Bona AB; routine use reported by Doug Horgan, Journal of Light Construction, November 2025

  4. 1980

    Laminate reaches the shops

    In 1977 a brainstorming team at the Swedish company Perstorp, called Idé-77, proposed using the company's laminate panels as a floor. Pergo, the brand Perstorp later created, says the first laminate floor, Perstorp Golv GL80, went on sale in Sweden in 1980; Välinge's timeline says IKEA brought laminate flooring to market in 1979. In 1984 Perstorp halved the planks to make them easier to carry and install.

    int.pergo.comunilin.comvalinge.com

    Credit

    Perstorp AB's Idé-77 team

  5. 1996

    Floors that click together

    Välinge, founded in Sweden in 1993 by Darko Pervan, brought out a mechanical locking joint for laminate in 1996 with its licensee Alloc: boards are angled or pressed together and hold without glue. Välinge says it first offered a licence in 1994 to Pergo, which was not interested. In 2000 Kährs and Välinge showed a glueless joint for wood floors, which Kährs sold as Woodloc. In 2003 a US appeals court upheld a trade-commission finding that Unilin, Pergo and other importers did not infringe Alloc's and Välinge's patents, because those patents required "play", a small gap between the locking surfaces, and the rival joints had none.

    Lessonthe exact geometry of a joint, as the patent described it, decided whether rival click floors could keep entering the US.

    valinge.comkahrsgroup.comjustice.gov

    Credit

    Darko Pervan and Välinge Innovation; Alloc; Kährs

  6. 2016

    Formaldehyde and a model error

    Formaldehyde is an irritant gas given off by the urea-formaldehyde glues in some wood-based panels and floors. After a consumer investigation, the US Consumer Product Safety Commission tested laminate made in China in 2012 to 2014 and sold by Lumber Liquidators, and CDC and its sister agency ATSDR modelled home air levels in a report released on 10 February 2016. Two days later an outside reader suspected an error: the agencies had used the wrong ceiling height, which made their air estimates about three times too low, and the corrected lifetime cancer estimate rose from 2 to 9 extra cases per 100,000 people to 6 to 30. Consultants at Exponent later used air tests from 17,867 screened homes and estimated 0.33 to 1.2 per 100,000. On 12 December 2016 EPA published a national rule under TSCA Title VI, in force from 1 June 2018, with the same limits as the Phase II limits of California's rule, which the California Air Resources Board approved on 26 April 2007.

    Lessonone wrong input in an exposure model changed official advice, and an outside reader caught it within two days.

    archive.cdc.govarchive.cdc.govpubmed.ncbi.nlm.nih.govepa.govww2.arb.ca.gov

    Credit

    CPSC; CDC and ATSDR; EPA; CARB

  7. 2022

    Parquet sanding time capped

    Wood dust causes cancer of the nose and sinuses, and the International Agency for Research on Cancer's 1995 monograph on it named parquet floor sanding and varnishing among the jobs with exposure. Germany's wood-dust rule, TRGS 553 (July 2022 edition, amended February 2025), assumes that parquet sanding machines exceed the workplace limit two to three times, and allows work with them for at most 30 minutes a shift. Only machines connected to a separate dust extractor certified to dust class M are exempt.

    Lessonthe dust bag on the machine is not counted as a control; only a separate certified extractor is.

    dguv.depublications.iarc.who.int

    Credit

    Germany's Committee on Hazardous Substances (AGS)

Open

  1. 01

    Test the winter-gap calculator

    A record of the real gaps that open in new solid-wood floors through one heating season, set beside the gaps predicted from the Forest Products Laboratory's shrinkage tables. Phone photos taken with a printed scale card are measured by an image model, and indoor humidity is logged in each room.

    The brief
    Credit · unclaimed
  2. 02

    Sanding dust, measured on site

    A public set of dust measurements taken while professional floor sanders do their normal work on new, unfinished wood. Each run is measured two ways: a reference inhalable-dust sampler at the breathing zone, weighed by a lab, and a low-cost optical particle sensor logging every second. The same machines are measured with only their own bag and again connected to a separate class M extractor.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test the winter-gap calculator

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A record of the real gaps that open in new solid-wood floors through one heating season, set beside the gaps predicted from the Forest Products Laboratory's shrinkage tables. Phone photos taken with a printed scale card are measured by an image model, and indoor humidity is logged in each room.

Why it is still open

A contractor's calculator published in the Journal of Light Construction in November 2025 uses those tables and warns that such methods "are 'averages' and known to be inaccurate by 15% to 25%". Gaps are still judged by eye at the end of the humid season, as the National Wood Flooring Association (NWFA) recommends. Searches found trade articles and case notes but no field dataset.

jlconline.com

Built with what exists

Temperature and humidity data loggers such as Onset HOBO; a pin moisture meter; feeler gauges for spot checks; phone cameras; an open segmentation model such as Meta's Segment Anything with OpenCV to measure gap widths in the photos.

  1. First step

    Write a one-page protocol and ask three installers starting solid-oak jobs this month to let loggers go in on day one.

  2. Done looks like

    20 newly laid solid oak floors, each with a predicted and a measured end-of-winter gap at 10 marked joints, published with the mean error and compared with the 15% to 25% figure.

Open 02 · the brief

Sanding dust, measured on site

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of dust measurements taken while professional floor sanders do their normal work on new, unfinished wood. Each run is measured two ways: a reference inhalable-dust sampler at the breathing zone, weighed by a lab, and a low-cost optical particle sensor logging every second. The same machines are measured with only their own bag and again connected to a separate class M extractor.

Why it is still open

The field data are few and old. NIOSH measured one refinishing job in Madison, Wisconsin, in June 2000 and found every wood-dust sample from sanding and buffing above its recommended limit of 1 mg/m³. Germany's current rule still rests its two-to-three-times judgement on a measurement series published by the woodworkers' accident insurer in April 1998. This research found no published measurements of today's sanders and extractors on site.

elcosh.orgdguv.de

Built with what exists

IOM inhalable samplers and personal sampling pumps (SKC); weighing by an accredited lab; Sensirion SPS30 particle sensors logged on a Raspberry Pi; a class M extractor. The sanders wear P3 respirators throughout, as they should on any job.

  1. First step

    Find a sanding firm with new floors to sand, and book two inhalable samplers and an accredited lab for a five-run pilot.

  2. Done looks like

    30 timed sanding runs across at least three machine-and-extractor set-ups, each with a lab-weighed result in mg/m³, and a published measure of how closely the sensor tracks the lab result (R² and mean error).