BRENNEN

Industries / Consumer goods / Firearms and ammunition

Gunmaking

Gunmaking is the factory work of turning metal, wood and plastic into finished firearms, and of making cartridges, for hunters, sport shooters, police and other buyers.

7

Milestones achieved, from 1798 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1798

    Whitney's contract runs late

    Eli Whitney of New Haven, Connecticut, signed a contract on 14 June 1798 to supply 10,000 muskets to the federal government within just over two years, expecting to build machines that unskilled workers could run. By the end of 1800 he had delivered none. The first 500 arrived late in 1801, and the contract was not closed until January 1809. The historian Eugene Ferguson found that the national armories at Springfield and Harpers Ferry and other private contractors supplied many more muskets in those years, generally by better methods, and that the idea of interchangeable parts probably began in France.

    LessonWhitney was long called the father of mass production on the strength of his plans, and the delivery record does not bear the title out.

    journals.ku.edu

    Credit

    Eli Whitney; historian Eugene S. Ferguson

  2. 1819

    A lathe copies gunstocks

    Thomas Blanchard patented a lathe for cutting irregular forms in 1819. It works much like a key-cutting machine: a wheel rolls over an iron master stock and steers a cutter over a rough wooden blank, so each stock comes out the same shape. Both US national armories adopted it in the early 1820s, and with about a dozen more Blanchard shaping and inletting machines it took over much of the hand carving of gunstocks. The only surviving example, dated 1822, is at Springfield Armory National Historic Site.

    home.nps.gov

    Credit

    Thomas Blanchard; Springfield Armory

  3. 1822

    Rifles made exactly alike

    In 1819 the War Department contracted John H. Hall to make 1,000 breech-loading rifles, and Hall set up works at Harpers Ferry, Virginia, to make them with interchangeable parts, meaning any part fits any rifle of the model. In December 1822 he wrote to the Secretary of War that he had found methods "for fabricating arms exactly alike, & with economy, by the hands of common workmen." In 1832 Colonel George Talcott of the Ordnance Department reported that the works had reached "a greater degree of perfection, as regards the quality of work and uniformity of parts than is to be found anywhere." The National Park Service calls Hall's straight-cutting machine the forerunner of the milling machine.

    LessonUnlike Whitney's plans, Hall's claim was confirmed by an inspector from outside his works.

    nps.gov

    Credit

    John H. Hall; Harpers Ferry Armory

  4. 1854

    Britain buys the American system

    American machine-made goods, including Samuel Colt's revolvers and the work of Robbins and Lawrence of Windsor, Vermont, were shown at London's Great Exhibition of 1851, and by 1853 Colt ran a pistol factory in London with machines brought from the United States. In 1854 a British commission for the Board of Ordnance went to the United States to study what it called the "American System" and to buy machine tools for a new government armory at Enfield, near London. Colt told a Parliamentary committee that year that "there is nothing that cannot be produced by machinery." The Committee on the Machinery of the United States presented its report to the House of Commons on 10 July 1855.

    journals.ku.edubusinesshistoryexplorer.businessarchivescouncil.org.uk

    Credit

    the committee and the Board of Ordnance; Samuel Colt; Robbins and Lawrence

  5. 1982

    Frames molded from plastic

    Gaston Glock, an Austrian engineer whose company made injection-molded parts, designed a pistol with a polymer (plastic) frame for the Austrian armed forces, and the Austrian Army accepted it as its service pistol in 1982. Injection molding forms a part by forcing hot plastic into a mold, in place of machining it from steel. The company says the pistol is made from an average of 34 parts.

    us.glock.com

    Credit

    Gaston Glock; Glock GmbH, by its own account

  6. 2020

    Remington is broken up

    Remington, whose brand dates from 1816, went bankrupt in 2018 and came out two months later having shed $775 million of debt and kept all its plants. It filed again in July 2020, and this time it was sold in pieces through the US Bankruptcy Court for the Northern District of Alabama. On 30 September 2020 Ruger announced that the court had approved its $30 million purchase of Marlin; Vista Outdoor agreed to pay $81.4 million for the ammunition plant at Lonoke, Arkansas, and the Remington brand for ammunition; Sierra Bullets took Barnes; and the Roundhill Group took Remington's firearms business, including the Ilion, New York, factory.

    LessonA restructuring that cut debt but kept the business whole was followed within two years by a breakup among several buyers.

    americanrifleman.orgsec.gov

    Credit

    reported by American Rifleman; Sturm, Ruger & Co

  7. 2026

    Beretta buys into Ruger

    American Rifleman says Ruger has historically ranked first among US makers by number of firearms made each year. In May 2026 Ruger signed a cooperation agreement with Beretta Holding of Luxembourg, parent of the Italian maker Beretta, that lets Beretta Holding name up to two directors and caps its stake at 25%. Its tender offer for 2,400,184 shares at $44.80 each drew 6,094,325 shares, and on 20 October 2026 it reported owning about 25.0% of Ruger. Other recent deals put more brands under fewer owners: in 2025 Ruger bought Anderson Manufacturing, Olin, owner of Winchester Ammunition, bought Ammo Inc.'s ammunition plant, and Czechoslovak Group (CSG), owner of The Kinetic Group of ammunition makers, took full ownership of Fiocchi.

    sec.govsec.govamericanrifleman.org

    Credit

    Beretta Holding; Sturm, Ruger & Co.; reported in SEC filings and by American Rifleman

Watch for

  1. Beretta's Croatian ammunition plant

    Beretta Holding plans a new factory for small-caliber ammunition at Obrovac, in Zadar County, Croatia, under an agreement with the Croatian government. It is a joint investment of €125 million in which Beretta Holding holds 50% plus one share, the government and the investor Ivan Kapetanović hold the rest, and Beretta is to set up the production lines. The plant is due to run by mid-2029. The announcement does not say whether its output is meant for civilian or military buyers.

    Achieved whenthe Croatian government or outside reporting confirms the plant is producing.

    berettaholding.com

    Claimed by

    Beretta Holding, reprinting Il Sole 24 Ore, July 2026

Open

  1. 01

    A new world production count

    A public table of civilian firearms and ammunition production by country and year from 2015 on, each figure linked to its source (national statistics, company annual reports, regulator filings), with estimates marked as estimates and the method written down.

    The brief
    Credit · unclaimed
  2. 02

    Who owns which brand

    A dated table of firearm and ammunition brands and their owners from 2000 to today, each change of owner linked to a filing or release, joined to AFMER output so that anyone can see what share of US production the largest owners control in each year.

    The brief
    Credit · unclaimed

Open 01 · the brief

A new world production count

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of civilian firearms and ammunition production by country and year from 2015 on, each figure linked to its source (national statistics, company annual reports, regulator filings), with estimates marked as estimates and the method written down.

Why it is still open

The last global estimates are a quarter of a century old and do not agree. The Small Arms Survey's 2001 yearbook put 2000 production at about 4.3 million firearms, at least 75% of them made in the United States, while its 2002 yearbook estimated nearly eight million small arms, including commercial firearms, made in 2000 by more than 1,000 companies in at least 98 countries. Its 2014 research note on producers says global output is hard to estimate because the market is opaque, and it deals mainly with military arms. US output by maker is already public: volunteers have turned ATF's Annual Firearms Manufacturing and Export Report (AFMER) into machine-readable tables, the AFMER Explorer for 2000 to 2024 and an earlier table for 2000 to 2019. Searches found no newer count for the world.

smallarmssurvey.orgsmallarmssurvey.orgsmallarmssurvey.orggithub.comgithub.com

Built with what exists

The AFMER Explorer's data for US makers; annual reports of listed makers such as Sturm, Ruger & Co., Smith & Wesson, Colt CZ Group and Taurus Armas, read through SEC EDGAR and stock-exchange filings; UN Comtrade export figures for firearms and ammunition as a cross-check; an AI agent that searches, reads filings and keeps the link behind each number (see the Note "Findings that cite notes"); Zenodo to publish the table with a DOI.

  1. First step

    Take the AFMER totals for 2023 and 2024 from the AFMER Explorer, then list which of the 13 countries the Small Arms Survey named as dominating the market in 2002 publish any official production figure.

  2. Done looks like

    At least 20 countries with a sourced production figure for 2023 or later, a world total compared with both Small Arms Survey figures for 2000, and a second person checking a random 10% of rows against the sources.

Open 02 · the brief

Who owns which brand

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A dated table of firearm and ammunition brands and their owners from 2000 to today, each change of owner linked to a filing or release, joined to AFMER output so that anyone can see what share of US production the largest owners control in each year.

Why it is still open

Deals are reported one at a time, in year-end news roundups such as American Rifleman's for 2025 and in filings such as Beretta Holding's 2026 tender offer for Ruger. A blog analysis of US ammunition brands from late 2025 gives a snapshot table of owners, without the date of each change or links to filings, and it leaves out firearms. The AFMER Explorer groups some license numbers under one maker for its own queries, such as a Sturm Ruger aggregate across about nine licenses, but it does not track owners over time. Searches of GitHub for brand and maker tables found nothing that does.

americanrifleman.orgblog.roninsgrips.comgithub.com

Built with what exists

SEC EDGAR full-text search, which is free and returns 8-K, 10-K and tender-offer filings by company; company press rooms; bankruptcy court records such as Remington's 2020 sale; the AFMER Explorer's per-maker data; Wikidata to give each brand and owner a stable identifier; an AI agent that keeps the source link for each change (see the Note "Findings that cite notes").

  1. First step

    List the owners in 2000 and in 2025 of the 20 largest makers in the AFMER Explorer, with one source for each.

  2. Done looks like

    At least 100 brands with owners for every year from 2000 to 2025, every change linked to a source, a chart of the share of US firearms output held by the five largest owners each year, and a 10% spot check by a second person.