BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Fasteners

Rivets

A rivet joins plates with a pin whose end is spread after it passes through them, hammered hot in the old way or pressed cold today, and newer kinds are set from one side or punch their own hole.

6

Milestones achieved, from 1837 to 1998.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1837

    A machine closes boiler rivets

    During a boilermakers' strike, William Fairbairn of Manchester had his assistant engineer Robert Smith build a powered machine to close the rivets that join boiler plates, and paid for a patent in Smith's name (No. 7302, 16 February 1837). By October 1838 the firm was advertising the machine for its much shorter riveting time. Grace's Guide notes that John Bourne reported using machine riveting in Dublin in 1836, so Fairbairn may not have been first.

    gracesguide.co.uk

    Credit

    William Fairbairn and Robert Smith

  2. 1939

    Rivets set from one side

    A blind rivet is one that can be set when only one side of the joint can be reached, as inside a wing. Carl W. Cherry of Carmel, California, filed in June 1937 for a rivet that "can be readily fastened in place in objects without hammering, or without any necessity for backing", and was granted US patent 2,183,543 on 19 December 1939. Assembly magazine calls it the first US patent for an aluminum blind rivet, and says the aircraft industry took it up quickly and used it to mass-produce military aircraft in the Second World War.

    patents.google.comassemblymag.com

    Credit

    Carl W. Cherry

  3. 1950

    Collars squeezed onto pins

    Louis C. Huck of Detroit filed in December 1945 for a two-piece fastener: a grooved pin and a collar that a pulling tool swages (squeezes) into the grooves, which holds the parts "with the bolt in tension". US patent 2,531,048 was granted on 21 November 1950. Howmet, which now owns the Huck brand, says the idea came after a December 1944 trip to look at steel drop tanks whose two halves had to be fastened together, and that the lockbolt is now used in railcars, track, trucks, bridges and solar frames.

    patents.google.comhfsindustrial.com

    Credit

    Louis C. Huck, Huck Manufacturing Company

  4. 1951

    Bolts replace hot rivets

    A rivet driven red-hot shrinks as it cools and clamps the plates, but by how much varied too widely to count on in design. Batho and Bateman told a British steel structures committee in 1934 that bolts could be tightened hard enough to stop joints slipping, but little followed until the Research Council on Riveted and Bolted Structural Joints formed in the US in 1947. With ASTM's material specification for high-strength bolts first approved in 1949, the council issued its first specification in January 1951, which let a bolt replace a rivet one for one. Germany issued a preliminary code in 1956 and Britain BS 3294 in 1960, by the account of John Fisher and John Struik of Lehigh University.

    LessonA joint method needs a written specification that engineers can cite before it replaces the old one; the 1934 finding waited 17 years for one.

    boltcouncil.org

    Credit

    Research Council on Riveted and Bolted Structural Joints (now the Research Council on Structural Connections); ASTM

  5. 1993

    Rivets punch their own hole

    A self-piercing rivet is pressed through the top sheet and flares into the bottom sheet against a shaped die, with no hole drilled first, so it can join aluminium and mixed metals that are hard to spot weld. The process dates from the 1960s, and in 1975 it fixed handles to paint-can lids. A 2017 review by Dezhi Li and colleagues says Audi, working with the British maker Henrob, first used it on a large scale in the aluminium A8 in 1993, with about 1,100 rivets per car. The same review counts about 3,600 in Jaguar's aluminium XJ, where WardsAuto reported almost 3,200 in 2003, and 2,200 to 2,700 in Ford's aluminium F-150.

    uhra.herts.ac.ukwardsauto.com

    Credit

    Audi; Henrob

  6. 1998

    Slag in the Titanic's rivets

    Tim Foecke, a metallurgist at the US National Institute of Standards and Technology (NIST), examined rivets recovered from the wreck of the Titanic and reported in 1998 that their wrought iron held three times today's allowable slag, the glassy residue left from smelting, which made them brittle. NIST says his analysis "strongly suggested" that the iceberg broke off rivet heads and let water in between hull plates. A 2003 paper by Jennifer Hooper, Foecke and others, which noted that the ship's steel had met the standards of 1911, compared the rivet iron with wrought iron from other structures of the time.

    LessonA riveted seam is only as strong as the iron in its weakest rivets; that the rivets sank the ship remains NIST's interpretation, not a settled fact.

    nist.govnist.gov

    Credit

    Timothy Foecke, NIST

Watch for

  1. Rivets fired at high speed

    The Pacific Northwest National Laboratory (PNNL) says its High-Velocity Joining process, HiVe, drives rivets through stacked sheets at 50 to 300 m/s with no drilled hole, forming a bond in which the metals fuse in a fraction of a second. It says early joints were as strong as or stronger than spot welds, with failures in the metal around the joint, and names four forms, one of them a self-piercing rivet. Its gunpowder-driven shots vary 10 to 20% from one to the next, so it is building an electromagnetic driver.

    Achieved whena lab or carmaker outside PNNL publishes strength and fatigue tests of HiVe joints, or puts the process on a production line.

    pnnl.gov

    Claimed by

    PNNL, principal investigator Vineet Joshi, May 2026

Open

  1. 01

    Blind rivet curves, shared

    A public set of force and stroke recordings from setting blind rivets, with faults made on purpose (a hole too large, a stack too thick or too thin for the rivet's grip range, a missing sheet, the wrong rivet), each rivet afterwards cut open or pull-tested to label it, plus a baseline model that flags the bad settings.

    The brief
    Credit · unclaimed
  2. 02

    Self-piercing joints in the open

    A public benchmark of cross-section photos of self-piercing riveted joints, cut through the rivet's centre and polished, with the measures that decide a joint's quality marked by hand: head height, interlock (how far the flared rivet leg hooks into the bottom sheet) and the bottom sheet's remaining thickness. Models from different groups could then be scored on the same images.

    The brief
    Credit · unclaimed

Open 01 · the brief

Blind rivet curves, shared

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of force and stroke recordings from setting blind rivets, with faults made on purpose (a hole too large, a stack too thick or too thin for the rivet's grip range, a missing sheet, the wrong rivet), each rivet afterwards cut open or pull-tested to label it, plus a baseline model that flags the bad settings.

Why it is still open

Tool makers sell tools that read force and distance to catch wrong rivets, missing parts and wrong hole sizes; Stanley Assembly Technologies reported 6,200 defects per million in a field trial of its BRF30PB-20 in 2025. Research groups have trained classifiers on their own curves, such as Tecnalia's 2024 study, which reported precision and accuracy above 0.8, but neither says its data is public, and a search of Zenodo on 18 November 2026 found no blind-rivet setting data set.

assemblymag.comscienceportal.tecnalia.comzenodo.org

Built with what exists

A hand or air-powered blind rivet tool fitted with a load cell and a linear displacement sensor; a microcontroller board logging at 1 kHz or faster; standard aluminium and steel blind rivets and sheet coupons; a hacksaw and a USB microscope for sections; Python with scikit-learn or a small time-series model.

  1. First step

    Fit a load cell under the nose of a hand riveter, set 50 rivets in correct holes and 50 in oversized ones, and plot the two families of curves.

  2. Done looks like

    At least 2,000 settings across five fault types and three rivet sizes, each labelled from a section or pull test and published under an open license, with a baseline detector scored on a held-out tenth for detection and false-alarm rate per fault type.

Open 02 · the brief

Self-piercing joints in the open

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public benchmark of cross-section photos of self-piercing riveted joints, cut through the rivet's centre and polished, with the measures that decide a joint's quality marked by hand: head height, interlock (how far the flared rivet leg hooks into the bottom sheet) and the bottom sheet's remaining thickness. Models from different groups could then be scored on the same images.

Why it is still open

Models that take these measures already exist, from Mushi Li and colleagues (Journal of Manufacturing Processes, 2022) and from Wei Qin Chuah and colleagues (2025), who trained first on synthetic images because real micro-CT data is scarce. Neither paper says its images are public, so their results cannot be compared.

arxiv.orgdoi.org

Built with what exists

Joints made on a university's or a supplier's riveting machine; a metallographic saw, mounting press and polisher; a microscope camera; CVAT for labels; Meta's open Segment Anything 2 model to draft outlines; PyTorch.

  1. First step

    Ask the two groups whether their images can be released, and section 20 joints from a supplier's sample board.

  2. Done looks like

    1,000 sections from at least ten sheet stacks (aluminium on aluminium and steel on aluminium, in three thicknesses), each measured by two people with their disagreement reported, and at least two published models scored on a held-out set of 200.