BRENNEN

Industries / Industrial equipment and services / Equipment rental

Tracking

Tracking is knowing where each machine and tool in a rental fleet is, how many hours it has run, and whether it has been stolen.

6

Milestones achieved, from 1981 to 2016.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1981

    Six in a hundred found

    In the FBI Law Enforcement Bulletin of March 1981, Special Agent George J. Lyford reported that about 10,000 pieces of heavy construction and farm equipment were on file as stolen in the FBI's National Crime Information Center (NCIC), and that only about 6% of stolen heavy construction equipment was recovered. He gave the reasons. Machines had no standard identification number: each maker used its own, from 4 to 15 characters long. Plates were easily removed and replaced with counterfeits. One key could start every machine of a make or model. And a theft from a spread-out site often went unnoticed for days.

    LessonWithout a reliable number and a shared record, police could not tell a stolen machine from a legitimate one or trace its owner.

    ojp.gov

    Credit

    George J. Lyford, FBI; NCIC analysis by W. E. Rutledge, California Highway Patrol

  2. 2001

    A register for stolen machines

    David Shillingford founded the National Equipment Register (NER) in the US in 2001, after talks with insurers, equipment owners and police showed that better sharing of information was a cost-effective part of the answer. NER keeps a database of theft and ownership records, checks the serial and component numbers on loss reports, and searches for matches. By its own count it holds over 100,000 theft reports and has access to more than 15 million ownership records. With the National Insurance Crime Bureau (NICB), NER published yearly theft reports from NCIC data: in 2010, 13,374 thefts of heavy equipment were reported and 19% of the equipment stolen was recovered.

    ner.netgovernment-fleet.com

    Credit

    David Shillingford; NER; NICB

  3. 2008

    Britain marks and registers

    The Construction Equipment Security and Registration scheme (CESAR) was set up in Britain in 2008, run with the Construction Equipment Association (CEA) and the identification firm Datatag. Each machine gets a visible triangular registration plate and hidden markings, including radio-frequency identification (RFID) tags, linked to a register with a contact centre open 24 hours a day. CESAR says over 650,000 machines are registered and estimates plant and farm machinery theft at £1 million a week. In July 2017 a West Midlands hire company's JCB 8030 mini-excavator was taken by a customer who turned out to be bogus; the Datatag RFID label let it be traced to Hertfordshire, and it was found on 10 August in a back garden in Radlett. The thieves had removed some CESAR markings but not all, and four people were arrested.

    cesarscheme.orgtheconstructionindex.co.uk

    Credit

    CEA; Datatag

  4. 2010

    One data set, many brands

    Telematics is the data a machine sends from the field over a mobile network: its location, hours, fuel and faults. Each maker sent it to its own website, so a rental firm with several brands had to read several systems. The Association of Equipment Management Professionals (AEMP) began work on a common format in 2008 with Caterpillar, Volvo, Case, Komatsu and John Deere, and first introduced it in 2010. A second version, unveiled in March 2014 for release that October, had 19 data elements and 42 default codes covering utilization, excess idling, location, availability, inspection, electronic proof of usage and preventive maintenance.

    proemion.comenr.com

    Credit

    AEMP and the five manufacturers

  5. 2015

    Power tools report in

    Milwaukee Tool introduced its ONE-KEY cloud system and app in September 2015, after about two years of development. Its free inventory software records a tool's category, location and serial number, for tools of any make, and Bluetooth-connected Milwaukee drills and impact drivers send usage data to it. Milwaukee's Corey Dickert told ENR that most US contractors were crews of 10 or fewer, for whom a $10,000-a-year tracking system was too much, so the alternative was a spreadsheet or pen and paper.

    enr.comcorporate.homedepot.com

    Credit

    Milwaukee Tool

  6. 2016

    A world standard for fleets

    On 21 July 2016 the International Organization for Standardization (ISO) approved the mixed-fleet telematics standard developed by AEMP and the Association of Equipment Manufacturers (AEM), as Part 3 of ISO 15143, the standard for worksite data exchange. It covers location, operating hours, fuel used, caution codes, idle time and engine diagnostic codes, so an owner can pull the same fields from every maker's server.

    LessonA standard does not make the data clean: Proemion, a telematics supplier, reports that compliance varies between makers and even between models of one maker, and that operating-hour counters, which should only rise, have been seen going up and down.

    enr.comproemion.com

    Credit

    AEMP; AEM; ISO

Watch for

  1. Forensic marks required by law

    The Equipment Theft (Prevention) Act 2023, which received Royal Assent on 20 July 2023 and applies in England and Wales, lets the Secretary of State require that off-road vehicles and other equipment for farm or commercial work carry an immobilizer and a unique identifying mark before sale, and that sellers record the buyer. Nothing happens until regulations are made. In its response to the call for evidence (page updated 10 March 2026) the Home Office said it would bring regulations requiring forensic marking, registered on a property database police can reach at all hours, for all new all-terrain vehicles (ATVs) and all new GPS units used in farming and commercial work. It dropped immobilizers for now and left larger machinery out.

    Achieved whenthe regulations are made and in force, and a later count shows whether thefts or recoveries of the covered equipment changed.

    legislation.gov.ukgov.uk

    Claimed by

    UK Home Office, 2025 to 2026

Open

  1. 01

    A public scorecard for feeds

    A test that reads a fleet's ISO 15143-3 feeds from each maker's server and scores each maker and model on which fields arrive, how up to date they are, and whether they make sense: hour counters that never fall, idle hours no greater than total hours, fuel and position within physical limits. The results are published as a table by maker and model.

    The brief
    Credit · unclaimed
  2. 02

    Tags in steel boxes, tallied

    A filmed, repeatable test of how well Bluetooth tags let a phone find small tools where hire and site tools actually sit: closed steel gang boxes, shipping containers, van racks and pallets of other tools.

    The brief
    Credit · unclaimed

Open 01 · the brief

A public scorecard for feeds

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A test that reads a fleet's ISO 15143-3 feeds from each maker's server and scores each maker and model on which fields arrive, how up to date they are, and whether they make sense: hour counters that never fall, idle hours no greater than total hours, fuel and position within physical limits. The results are published as a table by maker and model.

Why it is still open

Code to read the feeds exists: John Deere publishes example clients, and the open-source OpenConstructionERP parses the feeds and flags hour counters that run backwards. Proemion reports that compliance varies between makers and models but publishes no results by maker, and a search of GitHub and the web found no public scorecard.

github.comgithub.comproemion.com

Built with what exists

Deere's example code, OpenConstructionERP's parsers, Python, and read-only access keys from a fleet owner.

  1. First step

    Ask one rental firm or contractor with a mixed fleet for read-only access to two makers' feeds and run the counter checks on a week of data.

  2. Done looks like

    30 days of feeds from at least 5 makers and 200 machines, with each field's availability and error rate by maker and model, published with the test code, after each maker has been sent its results and given time to respond.

Open 02 · the brief

Tags in steel boxes, tallied

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A filmed, repeatable test of how well Bluetooth tags let a phone find small tools where hire and site tools actually sit: closed steel gang boxes, shipping containers, van racks and pallets of other tools.

Why it is still open

The evidence points both ways. A measurement in a shielded radio test chamber found that a metal enclosure can block Bluetooth Low Energy signals so fully that a device cannot connect at all, and a maker of tool-tracking software warns that metal is the worst obstacle on sites. Yet an informal test by the technology site Screen Rant found an Apple AirTag inside three nested steel pots, and inside a closed microwave oven, still located by an iPhone. A search found no published tally of tags tested inside jobsite enclosures.

novelbits.iosharemytoolbox.comscreenrant.com

Built with what exists

Off-the-shelf tags (an Apple AirTag, a trade tool tag and a generic Bluetooth beacon), a phone app that logs signal strength such as Nordic Semiconductor's nRF Connect, a steel gang box, a shipping container and a tape measure.

  1. First step

    Put one tag in a closed steel box and record, at each metre out to 30 m, whether a phone detects it.

  2. Done looks like

    At least 4 tag types, 5 enclosures, 3 distances (5, 15 and 30 m) and 20 trials of each, with the share of trials in which the phone found the tag within 60 seconds, published with video and raw logs.