BRENNEN

Industries / Industrial equipment and services / Equipment rental

Maintenance

Maintenance is the checking, servicing, repair and certification each machine gets between hires and over its years in a rental fleet, so that the next customer receives one that is safe and works.

5

Milestones achieved, from 1972 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1972

    Lessors must check first

    Japan's Industrial Safety and Health Act (Act No. 57 of 1972), Article 33, requires a "machine lessor", a firm that leases listed machines to other employers, to take the measures needed to prevent accidents with those machines at the customer's workplace. The Act's ordinance sets out the duty: before lending a machine, the lessor must inspect it in advance, repair any fault it finds, and give the customer a written statement of the machine's capacity, its characteristics and the points to watch in use (Article 666). The same ordinance requires every vehicle-type construction machine, such as an excavator or bulldozer, to have a periodic self-inspection at least once a year (Article 167). For these machines this is a "specified self-inspection", which the Act says must be done by a qualified employee or a registered inspection agency.

    japaneselawtranslation.go.jplaws.e-gov.go.jp

    Credit

    Japan's National Diet; Ministry of Labour, now the Ministry of Health, Labour and Welfare

  2. 1998

    Proof travels with the machine

    Britain's Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), in force from 5 December 1998, require a thorough examination by a competent person at least every 6 months for equipment that lifts people and for lifting accessories, and at least every 12 months for other lifting equipment, unless a written examination scheme sets other intervals. Regulation 9(4) deals with hire directly: no lifting equipment may leave an employer's business, or be used after arriving from another business, unless it is accompanied by physical evidence that its last thorough examination was carried out. A hired scissor lift or telehandler therefore goes out with proof of its last examination.

    legislation.gov.uklegislation.gov.uk

    Credit

    UK Parliament; Health and Safety Executive (HSE)

  3. 2013

    Tested before every hire

    HSE's guidance on maintaining portable electric equipment (HSG107), first published in 1994, gives in its 2013 third edition a table of how often each kind of business should inspect and test such equipment. For equipment hire it gives a formal visual inspection before each issue and after each return, and a combined inspection and electrical test before each issue. The guidance says checks can be much less frequent for low-risk equipment such as office computers, and refers readers to the Institution of Engineering and Technology (IET) code of practice for in-service inspection and testing (2012) for how to test.

    hse.gov.uk

    Credit

    HSE; IET

  4. 2014

    Major inspection at ten years

    In May 2014 the International Powered Access Federation (IPAF) issued guidance on a "major inspection", a check of the structure and critical parts, for mobile elevating work platforms (MEWPs) kept beyond the design life their maker set. IPAF said demand for second-hand machines and "the retention of machines in some rental fleets" had put MEWPs into use past that life. The guidance proposes a major inspection within 10 years of a machine first entering service and every 5 years after that, sooner for heavy use or corrosive sites, and whenever 5 years of service records are missing, including on a change of owner or import. It noted that Australia, Canada and Finland had already written down a major-inspection requirement.

    ipaf.orgaviationpros.com

    Credit

    IPAF (technical and safety executive Chris Wraith)

  5. 2025

    Returned without full inspection

    On 20 November 2023 Chris Keegan, a delivery driver for Hessle Plant Ltd, a plant hire firm in Castleford, West Yorkshire, was killed when a forklift he was reversing onto a trailer fell from its side. The forklift was going back to a customer in Sheffield after repairs to its transmission. HSE found it had not had a full inspection to make sure it was safe to operate, and found several other defects that should have been found and fixed. The firm did a full pre-delivery inspection on forklifts going to new customers, but not on machines going back to existing customers. On 26 November 2025 Leeds Magistrates' Court fined the firm £433,550.

    LessonA pre-delivery inspection protects people only if every machine that leaves the yard gets one, including a machine returning to a customer after repair.

    press.hse.gov.uk

    Credit

    HSE (inspector David Beaton)

Watch for

  1. AI that reads service manuals

    United Rentals said its Manual Assist AI, a web application built with Amazon Web Services (AWS) tools, gives its service teams AI-assisted diagnostics and search across thousands of equipment makers' manuals: it finds the right manual, summarizes service procedures and points to the relevant pages. The company says the tool has more than 4,000 users a month and "significantly reduces the time required to find critical information", but gives no measured figure for time saved or repairs.

    Achieved whena measured change in repair time or first-time fix rate is published and checked by someone outside the company.

    press.aboutamazon.com

    Claimed by

    United Rentals and AWS, December 2025

Open

  1. 01

    Technician-graded manual questions

    A public test set of about 300 questions that rental technicians ask about the machines they repair, such as what a fault code means, a torque value, an inspection step or a wiring check, across 10 models common in rental fleets. Each question carries a working technician's answer and the manual page that supports it, and a script scores any AI assistant on giving the right answer and the right page.

    The brief
    Credit · unclaimed
  2. 02

    One table of inspection duties

    An open, machine-readable table of the inspections that law or national standards require of a rental fleet, by country and machine class (lifting equipment, MEWPs, excavators and loaders, forklifts, portable electric tools, air receivers). Each cell gives the interval, who may do the inspection, what record must travel with the machine on hire, and a link to the clause.

    The brief
    Credit · unclaimed

Open 01 · the brief

Technician-graded manual questions

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test set of about 300 questions that rental technicians ask about the machines they repair, such as what a fault code means, a torque value, an inspection step or a wiring check, across 10 models common in rental fleets. Each question carries a working technician's answer and the manual page that supports it, and a script scores any AI assistant on giving the right answer and the right page.

Why it is still open

United Rentals reports 4,000 monthly users for its manual assistant but publishes no accuracy or time figures. The nearest public benchmarks are built differently: Agri-Query (2025) uses the manual of a single farm machine and is graded by an AI judge, and TechManualQA-700 (2025) holds 700 machine-written questions on 20 manuals for appliances, cars and power tools, checked by two annotators, none of them from rental fleets or written by technicians.

press.aboutamazon.comexport.arxiv.orgzenodo.org

Built with what exists

Genie, a maker of lifts, publishes its service manuals, parts manuals and maintenance inspection forms online; open retrieval tools; small open models that can be adapted to a specialist job on one graphics chip (see the Note "One GPU to fine-tune"); a spreadsheet for grading.

genielift.com

  1. First step

    Download the service manuals for three scissor lifts and write the first 30 questions with one technician.

  2. Done looks like

    300 questions across 10 models, each with a technician's answer and page reference; a second technician checking at least 100 of them; and published scores for at least three approaches (a general chatbot, a retrieval system over the manuals, and plain keyword search), giving the share answered correctly with the right page.

Open 02 · the brief

One table of inspection duties

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, machine-readable table of the inspections that law or national standards require of a rental fleet, by country and machine class (lifting equipment, MEWPs, excavators and loaders, forklifts, portable electric tools, air receivers). Each cell gives the interval, who may do the inspection, what record must travel with the machine on hire, and a link to the clause.

Why it is still open

The rules differ in kind. Britain sets 6- and 12-month thorough examinations and requires proof to travel with hired lifting equipment; Japan requires a check before every lease and an annual specified self-inspection; IPAF proposes a 10-year major inspection that Australia, Canada and Finland had already written down. Munich Re's HSB engineering inspection business publishes such a table for plant hirers in the UK and Ireland only, and a search found no version covering several countries.

munichre.comipaf.org

Built with what exists

Official law databases (legislation.gov.uk, Japan's e-Gov law database and its English translations, national safety regulators' sites), a CSV file with a fixed set of columns, and a language model to draft cells that a person then checks against the clause.

  1. First step

    Fill the UK and Japan rows from LOLER, HSE guidance and Japan's Ordinance on Industrial Safety and Health, then send the column layout to IPAF or a national hire association for comment.

  2. Done looks like

    15 countries by 6 machine classes, every filled cell linked to the clause it comes from, a second person checking at least 20% of cells, and every disagreement between the two published.