BRENNEN

Industries / Technology / Electronics and semiconductors / Electronics distribution

Stock and warehouses

Distributors hold millions of small parts in reels, trays and sealed bags, and must keep them dry, safe from static and traceable until they ship.

5

Milestones achieved, from 1995 to 2022.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1995

    Military drops the age limit

    Before 1995 the US military specification for microcircuits, MIL-PRF-38535, required parts not used within three years of their marked date code to be retested. After a study of aging the rule was removed, and military parts now need only be solderable on delivery. Many buyers kept their own limits: Mini-Circuits, a maker of radio parts, wrote in 2017 that many customer policies accept only parts with date codes no older than two years, and some only six months.

    Lessona limit dropped from the rulebook can live on in buyers' own terms, and in June 2023 ECIA, the association of makers and authorized distributors, again asked buyers to drop blanket date-code limits, saying they slow orders and leave older stock to age further on the shelf.

    ecia.memberclicks.netminicircuits.com

    Credit

    US Department of Defense

  2. 1999

    One rule for dry packs

    Plastic chip packages take up moisture from the air and can be damaged by the heat of soldering, so they must be packed and handled with care. IPC first set procedures for such parts in December 1990 (IPC-SM-786). In April 1999 IPC and JEDEC replaced them with a joint standard, J-STD-033, for the handling, packing, shipping and use of moisture- and heat-sensitive surface mount parts, which was revised or amended six times up to 2018.

    electronics.orgshop.standards.ie

    Credit

    IPC and JEDEC

  3. 2016

    One 2D label for reels

    Distributors had each asked suppliers for their own label layout, and scanning several linear barcodes on every package was slow. Through ECIA, the largest distributors, among them Arrow, Avnet, DigiKey, Future, Mouser and TTI, adopted one 2D barcode label format (EIGP 114, a 2016 edition revised in 2018) and one central test portal for suppliers. More than 300 supplier shipping points had tested labels there, by the count of Bar Code Graphics, which runs the portal.

    barcode.graphicsemsnow.com

    Credit

    ECIA; Bar Code Graphics; the 2018 revision was led by DigiKey's Tony Lindgren

  4. 2021

    Military adopts the static rule

    Electrostatic discharge (ESD), a small spark of static electricity, can damage electronic parts while people handle them. On 12 January 2021 the US Department of Defense cancelled its own ESD control standard, MIL-STD-1686C of 1995, and named the ESD Association's industry standard for an ESD control program, ANSI/ESD S20.20, in its place.

    esda.org

    Credit

    US Department of Defense; ESD Association

  5. 2022

    A warehouse for small orders

    DigiKey opened a 2.2 million square foot, $400 million extension of its main warehouse in Thief River Falls, Minnesota, with 27 miles of automated conveyor. Its president calls it a "broken pack" distributor, one that takes orders of any size, and the Star Tribune reported that its revenue had grown from $1.86 billion in 2016 to $4.7 billion in 2021. DigiKey says the building triples the site's daily shipping and that it rewinds cut lengths of tape onto reels to the industry standard so customers' placement machines can feed them.

    startribune.comallaboutcircuits.com

    Credit

    DigiKey; KNAPP, which supplied the automation

Watch for

  1. Packing by machine

    DigiKey says it will spend $100 million over 18 months to add high-volume picking, automated packing and an upgraded order management system at Thief River Falls, using floor space left empty in 2022. It says the first automated packing system is on site and will run in 2026, and that it expects to grow more than 50% in 2026.

    Achieved whenthe packing lines are running and an outside report, such as a site visit or a state filing, gives shipping figures before and after.

    evertiq.com

    Claimed by

    DigiKey, October 2026

Open

  1. 01

    Read humidity cards by phone

    A phone app that photographs the humidity indicator card from an opened dry bag beside a printed color chart, and reports which of its spots (5%, 10% and 60% relative humidity) have changed color, with the time. A humidity indicator card is a strip of chemical spots packed with moisture-sensitive parts; the spots change color when the air in the bag gets damp, which tells the reader whether the parts must be baked dry before soldering.

    The brief
    Credit · unclaimed
  2. 02

    Check listed moisture ratings

    An open audit of 1,000 parts that compares the moisture sensitivity level (MSL, the J-STD-020 rating of how long a part may sit in open air before soldering) shown on distributor listings with the maker's own lookup for the same part, and records why each mismatch happens.

    The brief
    Credit · unclaimed

Open 01 · the brief

Read humidity cards by phone

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone app that photographs the humidity indicator card from an opened dry bag beside a printed color chart, and reports which of its spots (5%, 10% and 60% relative humidity) have changed color, with the time. A humidity indicator card is a strip of chemical spots packed with moisture-sensitive parts; the spots change color when the air in the bag gets damp, which tells the reader whether the parts must be baked dry before soldering.

Why it is still open

The cards are read by eye, and readers disagree. In June 2026 a buyer on DigiKey's forum could not tell the "yellow", "tan" and "brown" of a cobalt-free card apart, and the supplier answered that its own datasheet photo was incorrect. A search found no published camera reader for these cards.

forum.digikey.com

Built with what exists

A phone camera; a printed color reference chart for white balance; OpenCV for measuring spot color; sealed jars over saturated salt solutions, which hold the air at known humidity, with a reference hygrometer; optionally a small open-weight vision model fine-tuned on one graphics chip, such as one of Liquid AI's LFM3 models (see the Note "One GPU to fine-tune").

  1. First step

    Buy one can of each card type, set up three salt jars with a hygrometer, and photograph cards from each jar every day for a week.

  2. Done looks like

    300 published photos of a cobalt card and a cobalt-free card at known humidity, under three kinds of light; the app's call agrees with the known humidity on at least 95% of spots, and its agreement is compared with five people reading the same photos.

Open 02 · the brief

Check listed moisture ratings

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open audit of 1,000 parts that compares the moisture sensitivity level (MSL, the J-STD-020 rating of how long a part may sit in open air before soldering) shown on distributor listings with the maker's own lookup for the same part, and records why each mismatch happens.

Why it is still open

DigiKey's forum calls the gap between Texas Instruments datasheets and package labels "a common question", explained by two assembly sites that rate the same part differently, and in May 2026 it explained another case, Microchip 25AA256 memories packed as MSL 3, the same way. A search found answers to single cases but no published mismatch rate.

forum.digikey.comforum.digikey.com

Built with what exists

DigiKey's product information API, whose records carry a moisture sensitivity field, and Mouser's search API; makers' lookup tools such as Texas Instruments' MSL search; an AI model to read MSL tables from datasheets, with every value checked by a person.

  1. First step

    Pull 100 Texas Instruments and Microchip parts from DigiKey's API and compare them with the makers' lookups by hand.

  2. Done looks like

    1,000 parts from 10 makers, each listing classed as a match, a difference explained by assembly site, or an error; a second person rechecks 10%; the tally is published and sent to each distributor.