BRENNEN

Industries / Technology / Electronics and semiconductors / Electronics distribution

Shortages

Shortage work is deciding which customers get scarce parts, passing on warnings before parts run out or are discontinued, and avoiding a pile of surplus stock when supply returns.

6

Milestones achieved, from 1988 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1988

    Memory runs short

    In 1988 memory chips (DRAM) that had cost $2 two years earlier sold for $15 to $18, Hewlett-Packard held back a new computer because it could not get enough of them, and in June 1988 Digital Equipment raised the prices of its memory expansion systems by 35%. Five of the seven US makers of high-capacity DRAM had left the business by the end of 1985. The economist Douglas Irwin traces the squeeze to output cuts by Japanese makers after the 1986 US–Japan semiconductor agreement.

    Lessonbuyers with long-term supplier ties came through better than those hunting the lowest spot price, by the account of Micron's chief executive, Joe Parkinson.

    simson.netnber.org

    Credit

    reported by Simson Garfinkel in Computer Update (1988); analysis by Douglas A. Irwin (NBER)

  2. 1997

    Orders amplify upstream

    Hau Lee, V. Padmanabhan and Seungjin Whang showed in Management Science (April 1997) that orders passed up a supply chain vary more than the sales behind them, and that the distortion grows at each step up the chain, which they named the bullwhip effect. One of the four causes they analysed is the "rationing game": when a supplier rations scarce goods, buyers order more than they need.

    Lessonin a shortage, a distributor's order book overstates real demand.

    gsb.stanford.edu

    Credit

    Hau L. Lee, V. Padmanabhan, Seungjin Whang

  3. 2011

    Rules for ending a part

    JEDEC, the chip industry's standards body, requires in its product discontinuance standard (JESD48C, December 2011, revising editions dating back to at least August 2001) that a maker give customers and authorized distributors at least 6 months from a discontinuance notice to place final orders and 12 months to take final shipments. Authorized distributors must pass the notice on to affected customers, and a maker may offer to transfer tooling or set up wafer or die banks (stored unpackaged chips) so supply can continue.

    infineon.com

    Credit

    JEDEC Solid State Technology Association

  4. 2018

    Capacitors put on allocation

    Multilayer ceramic capacitors (MLCCs), tiny parts used in large numbers on every circuit board, ran short as makers struggled to meet demand from phones, electric cars and wireless gear and held back investment in older, larger sizes. By October 2018 many makers had put them on allocation, which means rationing stock among customers; Panasonic was quoting 99 weeks for out-of-stock chip capacitors and Kemet more than 52 weeks, and Murata had issued notices ending many older sizes, with last-time buys from March 2019. ERAI later counted 165 reports of suspect or nonconforming capacitors during the 2019 shortage, against six in 2024.

    Lessonwhen common parts are rationed, fakes of those parts follow.

    iconnect007.comsemimedia.cc

    Credit

    reported by I-Connect007; ERAI

  5. 2021

    Stock down to days

    A US Commerce Department request for information drew more than 150 replies and found that the median buyer of the chips hardest to get held 40 days of supply in 2019 and less than 5 days in 2021. Microcontrollers and analog chips made on older processes were among the hardest hit, although chip plants had run at more than 90% of capacity since mid-2020.

    Lessonstock cut to a few days leaves no room for a stop at a single plant.

    theregister.com

    Credit

    US Department of Commerce (Gina Raimondo, Secretary); reported by The Register

  6. 2025

    End-of-life notices start a rush

    When the three largest memory makers announced end-of-life plans for DDR4 and LPDDR4X memory in 2025, to move capacity to newer products, buyers rushed to stock up, and TrendForce, a market research firm, reported in July 2025 that some makers had postponed their DDR4 end-of-life dates as a result. Memory stayed short as AI servers took more of it: Omdia counted Southeast Asia's smartphone shipments down 36% in the third quarter of 2026 from a year earlier, with average selling prices up 53%, and Fairphone's chief executive, Raymond van Eck, told Reuters, "If you don't have allocation, you're out of the game."

    Lessona notice that a part is ending can cause the shortage it warns of.

    iconnect007.comiconnect007.comcyprus-mail.com

    Credit

    TrendForce; Omdia; Reuters

Watch for

  1. Reballed memory in budget phones

    TrendForce estimates that reballed memory, chips taken from old boards and given new solder balls, will be in about 3% to 4% of smartphones in 2026 and 7% to 9% in 2027, mostly 4 GB LPDDR4X in 4G phones priced under CNY 1,299.

    Achieved whenteardowns or makers' own disclosures confirm reballed memory in named phone models and give a measured share.

    trendforce.com

    Claimed by

    TrendForce, November 2026

  2. Old memory made again

    Micron says an investment of more than $2 billion at its plant in Manassas, Virginia, will quadruple its DDR4 wafer supply there for long-lifecycle customers in cars, defence, industry and networking, with qualified production expected by the end of 2026.

    Achieved whenMicron or its customers report qualified DDR4 shipping from Manassas in volume.

    investors.micron.com

    Claimed by

    Micron, May 2026

Open

  1. 01

    A public memory stock watch

    A daily public record, kept for at least six months, of authorized stock and unit price at three or more distributors for 300 memory chips (DDR3L, DDR4 and LPDDR4X memory and NOR and NAND flash), with every reading time-stamped, and a test of whether falling stock came before the price rises that market research firms report.

    The brief
    Credit · unclaimed
  2. 02

    Warning time for discontinued parts

    An open table of makers' public discontinuance notices, giving for each the date it was issued, the last order date and the last shipment date, and the share from each maker that meets JEDEC's minimums of 6 months to final orders and 12 months to final shipments.

    The brief
    Credit · unclaimed

Open 01 · the brief

A public memory stock watch

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A daily public record, kept for at least six months, of authorized stock and unit price at three or more distributors for 300 memory chips (DDR3L, DDR4 and LPDDR4X memory and NOR and NAND flash), with every reading time-stamped, and a test of whether falling stock came before the price rises that market research firms report.

Why it is still open

Supplyframe sells memory market signals from its Commodity IQ service to subscribers, and its Findchips blog publishes stock for a few named parts on single dates, as in its May 2026 "memory shortage watch", which found zero authorized stock for several Micron DDR4 grades. Volunteers have tracked one product this way: rpilocator lists whether dozens of shops in Europe, Asia and the Americas have Raspberry Pi boards in stock and when they last did. No open, daily, part-by-part series for memory chips was found (searches in November 2026).

blog.findchips.comrpilocator.com

Built with what exists

the stock and prices distributors show for each part, read through their interfaces within their terms, such as DigiKey's Product Information V4, whose pricing calls take a part number and quantity; a scheduled job writing to SQLite; Python and pandas; TrendForce's published price reports as the comparison.

developer.digikey.com

  1. First step

    List 50 DDR4 and LPDDR4X part numbers from Micron, Samsung, SK hynix, Nanya and Winbond, and start a daily job that records DigiKey's stock and price for each.

  2. Done looks like

    180 days of readings for 300 parts at three distributors with fewer than 2% missing, published under an open licence with a chart for each part, and a short published test of how many weeks, if any, falls in stock led the reported price rises.

Open 02 · the brief

Warning time for discontinued parts

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open table of makers' public discontinuance notices, giving for each the date it was issued, the last order date and the last shipment date, and the share from each maker that meets JEDEC's minimums of 6 months to final orders and 12 months to final shipments.

Why it is still open

Z2Data counted 621,909 part numbers discontinued in 2025 and found that 52% went without a notice from the maker, but it reports totals from its own paid database, not notice periods by maker. Some makers publish their notices: NXP's pages give last buy and last ship dates and cite JESD48, so the check can be made from public pages.

z2data.comnxp.com

Built with what exists

Makers' public notice pages and PDFs; Python with pdftotext; an AI model such as Claude or Gemini to pull out the three dates, with a person checking a sample; the JESD48C text as the rule.

  1. First step

    Collect NXP's discontinuance notices for 2025 and 2026 and extract the three dates from 50 of them.

  2. Done looks like

    1,000 notices from at least 10 makers, 2020 to 2026, each linked, with a second person checking the extracted dates on 10% of them at 95% agreement or better, and per-maker shares meeting the 6- and 12-month minimums.