BRENNEN

Industries / Technology / Electronics and semiconductors

Materials and equipment

Materials and equipment is the supply chain that feeds fabs: pure silicon crystals sliced into wafers, specialty gases and chemicals, compound semiconductors such as silicon carbide (SiC) and gallium nitride (GaN), and the machines that deposit, etch and clean.

7

Milestones achieved, from 1950 to 2023.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

In depth

The same ground is charted in more depth, as an industry of its own.

The road

AchievedWatch forOpen

Achieved

  1. 1950

    Crystals pulled from melt

    Gordon Teal and John Little at Bell Labs built equipment that grows a large single crystal (one unbroken lattice of atoms) by dipping a seed crystal into molten germanium and drawing it slowly upward, adapting a 1917 method of the Polish chemist Jan Czochralski. Researchers at Germany's Leibniz Institute for Crystal Growth wrote in 2022 that the Czochralski process is still one of the most common ways to grow the crystals behind computer chips.

    computerhistory.orgcongress.cimne.com

    Credit

    Gordon Teal and John Little, Bell Labs

  2. 1967

    Toolmakers become specialists

    Applied Materials was founded to sell machines that grow thin crystal films on wafers from gases. The Computer History Museum says it pushed chipmakers to hand the development of manufacturing methods to equipment suppliers, so chip firms could focus on product design.

    computerhistory.org

    Credit

    Applied Materials

  3. 2001

    Production moves to 300 mm

    A bigger wafer yields more chips from each pass through each machine, and a 300 mm wafer has 2.25 times the area of a 200 mm one. After chipmaker groups in the US, Europe, Asia and Japan agreed shared 300 mm standards in 1997, Infineon said its Dresden memory fab, ready for equipment in April 2001, would be the first anywhere to use 300 mm technology.

    sst.semiconductor-digest.comwww2.avs.org

    Credit

    Infineon Technologies and Motorola (Dresden pilot line); the I300I and J300 groups (shared standards)

  4. 2016

    The 450 mm wafer stalls

    Five chipmakers (GlobalFoundries, IBM, Intel, Samsung and TSMC) formed the Global 450mm Consortium to move to wafers with 2.25 times the area of 300 mm ones; it finished its first phase at the end of 2016 with no date set for the next. Toolmakers did not want to pay to redesign every machine; Lam Research's Dave Hemker said in 2014, "I am investing a whole bunch of money to cut my market size in half."

    Lessona change of wafer size needs every chipmaker and toolmaker to move together, and someone to pay.

    eetasia.comsemiengineering.com

    Credit

    the consortium members and the toolmakers

  5. 2022

    Neon supply cut by war

    The lasers used in chipmaking need ultra-pure neon, and after Russia invaded Ukraine the Ukrainian neon purifiers Ingas and Cryoin shut down; Reuters calculated they made 45 to 54% of the world's chip-grade neon. Large chipmakers held stocks for two months or more, by the research firm Techcet's estimate.

    Lessonan input that looks minor can come from a handful of plants in one region, and stockpiles buy time.

    theregister.com

    Credit

    event reported by Reuters and The Register

  6. 2022

    Silicon carbide reaches 200 mm

    Silicon carbide (SiC), a compound of silicon and carbon, is used in power chips for electric-car drives and chargers. In April 2022 Wolfspeed opened a 200 mm SiC fab in Marcy, New York, which it called the world's first and largest; in June 2025 it filed for bankruptcy protection to cut its debt, and TrendForce reported that Chinese rivals had moved on to 300 mm substrates.

    Lessona lead in wafer size can fade fast; TrendForce reported Wolfspeed's 200 mm line was "losing its cost edge".

    wolfspeed.comwolfspeed.comtrendforce.com

    Credit

    Wolfspeed

  7. 2023

    China licenses gallium, germanium exports

    From 1 August 2023 China required a licence to export gallium and germanium, which go into compound semiconductor chips; it banned gallium exports to the US in December 2024 and lifted that ban for one year in November 2025. The US Geological Survey says China produces 99% of the world's primary low-purity gallium.

    Lessona material made almost entirely in one country can be restricted by licence; the USGS lists new gallium projects in Australia, Canada, Greece, Kazakhstan and South Korea.

    pubs.usgs.govthechinaproject.com

    Credit

    China's Ministry of Commerce (policy); US Geological Survey (data)

Watch for

  1. Silicon carbide on 300 mm

    Infineon says it has made working power devices on 300 mm SiC wafers at its fab in Villach, Austria, using existing silicon equipment, and that a 300 mm wafer gives 2.3 times as many chips as a 200 mm one; Wolfspeed said in January 2026 that it had grown a 300 mm SiC wafer. Neither has set a date for volume production. Note: "More chips from a bigger disc".

    Achieved whenchips made on 300 mm SiC wafers are sold and a customer or outside lab confirms the wafer size.

    semiconductor-today.comwolfspeed.com

    Claimed by

    Wolfspeed, January 2026; Infineon, November 2026

  2. 300 mm gallium nitride volume

    Infineon says it will invest about €1.1 billion in existing cleanrooms in Villach by 2034 to make gallium nitride power chips on 300 mm wafers, with production starting by the end of 2027.

    Achieved whenGaN chips made on 300 mm wafers ship in volume and a customer or outside lab confirms the wafer size.

    semiconductor-today.com

    Claimed by

    Infineon, October 2026

Open

  1. 01

    An open SiC furnace model

    A free, fully documented heat model of the furnace that grows silicon carbide crystals. In this method, called physical vapor transport, SiC powder in a graphite crucible is heated to around 2,100 °C until it turns to vapour, which grows a crystal on a cooler seed above it.

    The brief
    Credit · unclaimed
  2. 02

    Open GEM300 interoperability tests

    An open test suite, plus a benchtop dummy load port, that checks whether free implementations of the factory-communication standards that fab tools use actually work with each other. Fab tools report to the factory's host computer using SEMI standards called SECS/GEM, and the 300 mm additions (GEM300) cover wafer carriers, load ports, process jobs and wafer tracking.

    The brief
    Credit · unclaimed

Open 01 · the brief

An open SiC furnace model

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free, fully documented heat model of the furnace that grows silicon carbide crystals. In this method, called physical vapor transport, SiC powder in a graphite crucible is heated to around 2,100 °C until it turns to vapour, which grows a crystal on a cooler seed above it.

Why it is still open

Published SiC furnace models are built in commercial software and not described fully enough to rebuild; a 2025 study of an 8-inch furnace used COMSOL and gives only some dimensions. The open package opencgs says "Currently, the focus is set on Czochralski growth", and its authors wrote in 2022 that crystal-growth models "are either implemented in closed-source software or not published at all."

pmc.ncbi.nlm.nih.govgithub.comcongress.cimne.com

Built with what exists

Elmer FEM; opencgs (Python); Gmsh; FEniCSx as a second solver for cross-checks; ParaView.

  1. First step

    Run opencgs's Czochralski example in Elmer, then draw a simple crucible, powder, seed and insulation in Gmsh and solve heat conduction with radiation.

  2. Done looks like

    a public repository with a fully specified furnace case (dimensioned drawing, material data with sources, heater power, boundary conditions); a mesh study in which source and seed temperatures change by less than 1 K on refinement; the same case solved in FEniCSx agreeing within 1%; and one outside person reruns it and gets the same temperatures.

Open 02 · the brief

Open GEM300 interoperability tests

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open test suite, plus a benchtop dummy load port, that checks whether free implementations of the factory-communication standards that fab tools use actually work with each other. Fab tools report to the factory's host computer using SEMI standards called SECS/GEM, and the 300 mm additions (GEM300) cover wafer carriers, load ports, process jobs and wafer tracking.

Why it is still open

Free GEM300 code exists, but none has been shown to work against real tools or another independent stack: go-factory-io says it "has been validated against a software simulator, not production semiconductor equipment", and Dreamine.Gem300 marks external interoperability "NOT_RUN". Compliance testing is sold commercially, for example Cimetrix EquipmentTest.

github.comgithub.compdf.com

Built with what exists

secsgem (Python), go-factory-io (Go), Dreamine.Gem300 (.NET), pytest; a Raspberry Pi, microswitches and an RFID reader for carrier presence and ID; a 3D-printed 25-slot cassette with plastic discs and infrared break-beam sensors; the SEMI E5, E30, E37, E40, E87, E90 and E94 standards, bought from SEMI.

  1. First step

    Buy E30 and E87 from SEMI, run a secsgem host against the go-factory-io equipment simulator on one laptop, and get the "establish communications" exchange working.

  2. Done looks like

    at least 20 scripted scenarios (connect, carrier arrives, carrier ID read, slot map checked, process job created, started and aborted, carrier removed) run between at least two independent open stacks and against the benchtop rig, with a published pass-fail table, a filmed rig run and bug reports filed upstream; one outside person reproduces the table.