BRENNEN

Industries / Technology / Electronics and semiconductors

Lithography

Lithography prints a chip's pattern onto a wafer, one layer at a time, by shining light through a photomask (a glass plate that carries the pattern, like a photographic negative) onto a light-sensitive coating called photoresist.

7

Milestones achieved, from 1955 to 2026.

3

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1955

    Light prints silicon patterns

    Bell Labs researchers borrowed the photoengraving method used for printed circuit boards to open small windows in the oxide layer on silicon wafers, so impurities went in only where the pattern allowed. In 1957 Jay Lathrop and James Nall at a US Army laboratory patented photolithographic methods.

    computerhistory.org

    Credit

    Jules Andrus and Walter L. Bond (Bell Labs); Jay Lathrop and James Nall (US Army Diamond Ordnance Fuze Laboratories)

  2. 1973

    Projection replaces contact printing

    Earlier tools printed with the mask touching the wafer or held just above it; Perkin-Elmer's Micralign used optics to project the mask's image onto the wafer instead. The Chip History Center says yields with the older tools were "notoriously low" and that Intel's new Micralign reputedly reached about 70%.

    shmj.or.jpchiphistory.org

    Credit

    Perkin-Elmer

  3. 1978

    The stepper arrives

    A stepper projects a reduced image of the mask onto one patch of the wafer, then moves ("steps") the wafer and exposes the next patch. The Semiconductor History Museum of Japan names GCA's DSW 4800 of 1978 as the first such machine and says steppers became the main exposure tool from the 1980s.

    Lessona market leader can lose its place by answering a new method too late; the Chip History Center says Perkin-Elmer "responded too late" to the stepper.

    shmj.or.jpchiphistory.org

    Credit

    GCA Corporation

  4. 1982

    Lasers become the light

    IBM researchers used excimer lasers, which run on gas mixtures such as krypton fluoride, to print patterns with 308 nm and 248 nm light about 100 times faster than lamps allowed. IBM's listing of the paper calls it the first such report; 248 nm laser scanners are still sold today.

    research.ibm.com

    Credit

    Kanti Jain and Burn-Jeng Lin, IBM Research

  5. 2004

    Water beats a new wavelength

    The industry had planned to move from 193 nm to 157 nm light, which needed lenses of calcium fluoride that nobody was paying to develop. At a Sematech forum in January 2004 chipmakers agreed instead to keep 193 nm light and put a thin layer of water between lens and wafer, a method called immersion lithography that Burn-Jeng Lin of TSMC had proposed in 2002; ASML says immersion reached volume production by 2006.

    Lessona simple change to a tool that already worked beat a new wavelength that needed new materials.

    spectrum.ieee.orgsst.semiconductor-digest.comapps.digitimes.comasml.com

    Credit

    Burn-Jeng Lin (TSMC); ASML

  6. 2019

    EUV enters volume production

    Extreme ultraviolet (EUV) lithography prints with light of 13.5 nm wavelength, from scanners that only ASML makes. Samsung said it started EUV wafer production for its 7LPP process in October 2018, and TSMC said its N7+ process began volume production with EUV in the second quarter of 2019; each calls itself first, in different terms.

    pr.tsmc.comnews.samsung.comasml.com

    Credit

    ASML (scanners); Samsung and TSMC (production)

  7. 2026

    High-NA EUV ships product

    High-NA scanners gather a wider cone of light (a numerical aperture of 0.55 instead of 0.33), which prints finer detail. On 15 July 2026 ASML reported, with a quote from Intel's foundry chief, that Intel was shipping some Panther Lake processors made with High-NA EUV on selected layers, at yields matched to the older scanners.

    finviz.comimec-int.com

    Credit

    ASML; Intel Foundry; earlier development at the ASML-imec lab

Watch for

  1. 400 wafers an hour

    Canon says its FPA-6400ES6a scanner, which uses 248 nm krypton fluoride (KrF) laser light for less critical layers, exposes 400 wafers of 300 mm an hour at 96 exposures per wafer, and lines each layer up with the one below to within 4.0 nm, which Canon calls the best among such scanners by its own research. It goes on sale in early December 2026. Note: "400 wafers an hour".

    Achieved whena chipmaker or an independent party reports the tool running at or near 400 wafers an hour in production.

    global.canon

    Claimed by

    Canon, November 2026

  2. X-ray lithography from accelerators

    US start-up Substrate says a particle accelerator can make X-ray light that prints features fine enough for 2 nm-class chips, and that this could bring the cost of a leading-edge wafer to about $10,000 by the end of the decade. Tom's Hardware notes that its lab images of 12 nm features are not independently verified.

    Achieved whena customer or research lab reports wafers patterned by Substrate's tool, with measured resolution, alignment and throughput.

    tomshardware.com

    Claimed by

    Substrate, October 2025

  3. High-NA for a full node

    Intel began acceptance testing of ASML's production High-NA scanner, the EXE:5200B, against contract figures of 175 wafers an hour and 0.7 nm alignment, and plans to use it for its 14A process, with risk production expected in 2027.

    Achieved whenIntel or a customer confirms that 14A chips made with High-NA EUV are shipping in volume.

    bits-chips.com

    Claimed by

    Intel, December 2025

Open

  1. 01

    Open EUV mask-correction benchmark

    A public dataset of at least 10,000 small layout clips from layers printed with EUV, each with its target shape, its simulated print and a reference corrected mask. Mask correction means reshaping the mask so the printed shape comes out right; the simulation should include the way light bounces off a thick EUV mask. Publish baseline models that predict the print and the corrected mask.

    The brief
    Credit · unclaimed
  2. 02

    Whole-layer open mask correction

    An open-source flow that corrects one complete layer of a complete open chip design, such as the first metal layer of the OpenROAD "ibex" processor in the 45 nm NanGate45 kit, by cutting it into tiles, correcting each tile on a graphics card with OpenILT and stitching them back together. Report runtime and print error, especially at the seams between tiles.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open EUV mask-correction benchmark

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public dataset of at least 10,000 small layout clips from layers printed with EUV, each with its target shape, its simulated print and a reference corrected mask. Mask correction means reshaping the mask so the printed shape comes out right; the simulation should include the way light bounces off a thick EUV mask. Publish baseline models that predict the print and the corrected mask.

Why it is still open

The two large public benchmarks for AI mask correction use older optical settings: LithoBench (2023) does not mention EUV, and MaskOpt (December 2025) is built from 45 nm designs. An open EUV simulator now exists, but it ships no dataset.

arxiv.orggithub.comgithub.com

Built with what exists

EUVlitho, an open EUV simulator from the Institute of Science Tokyo; the ASAP7 7 nm teaching design kit, which assumes EUV for key layers; OpenROAD to lay out example designs; KLayout to cut clips; PyTorch; LithoBench's code as a template.

  1. First step

    Install EUVlitho and run its example, then cut 100 clips from one metal layer of an ASAP7 example design and simulate them.

  2. Done looks like

    at least 10,000 clips released under an open licence with fixed training and test splits; a baseline print predictor that matches EUVlitho on held-out clips within a stated edge placement error, such as 1 nm (the distance between where an edge printed and where it should be); reference corrected masks that lower the mean error against uncorrected ones; scripts that let another person rebuild every number.

Open 02 · the brief

Whole-layer open mask correction

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open-source flow that corrects one complete layer of a complete open chip design, such as the first metal layer of the OpenROAD "ibex" processor in the 45 nm NanGate45 kit, by cutting it into tiles, correcting each tile on a graphics card with OpenILT and stitching them back together. Report runtime and print error, especially at the seams between tiles.

Why it is still open

OpenILT, the main open tool for this, works on single tiles, and its README says "Only the center 1024 × 1024 pixels are valid". EE Journal reports that stitched tile boundaries "can result in imperfections" and that full-chip correction can take weeks; the full-chip system it describes is proprietary.

github.comeejournal.com

Built with what exists

OpenILT (PyTorch); OpenROAD-flow-scripts with the NanGate45 platform; the KLayout Python interface for tiling and merging; one consumer or cloud graphics card.

  1. First step

    Run OpenILT on one LithoBench tile, then export the first metal layer of the small "gcd" example design and cut it into tiles.

  2. Done looks like

    a corrected mask file for the full first metal layer of at least one named design; the share of check points within a stated error, given separately for tile centres and for points within 100 nm of a seam, with the seam figure no worse than the centre by more than an amount stated in advance; the runtime on a named graphics card; and anyone can rerun the flow from the repository.