Industries / Health / Healthcare / Dental
Orthodontics
Orthodontics moves crooked teeth and badly matched jaws into place with brackets, wires and clear plastic aligners, and plans each movement from X-rays and scans.
7
Milestones achieved, from 1900 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1900
A specialty with a school
Edward H. Angle, a dentist who in 1892 gave up general practice to treat only crooked teeth, published a classification of malocclusion (teeth that do not meet properly) in the journal Dental Cosmos in 1899. It sorts bites by how the upper and lower first molars meet, and Washington University's Becker Library says it is still used in diagnosis. In 1900 he opened the Angle School of Orthodontia in St. Louis, which the library calls the first postgraduate school of orthodontics in the world, and in 1901 he founded the Society of Orthodontists, which grew into today's American Association of Orthodontists.
Credit
Edward H. Angle
1965
Brackets glued to teeth
Brackets are the small pieces that hold the wire against the teeth, and they used to be carried on metal bands fitted and cemented around each tooth. In 1965 George V. Newman reported in the American Journal of Orthodontics on epoxy adhesives that hold the attachments on the tooth surface itself. Orthodontic Practice US says that nothing did more for patients' comfort, because bonding ended the fitting and cementing of many bands.
Credit
George V. Newman
1971
Wire from a navy lab
Nitinol is an alloy of nearly equal parts nickel and titanium, developed at the US Naval Ordnance Laboratory, that bends a long way and springs back. George F. Andreasen, chairman of orthodontics at the University of Iowa, and T. B. Hilleman published an evaluation of it as orthodontic wire in the Journal of the American Dental Association in 1971. Pat Brady, then his resident, says it is 10 to 30 times more flexible than comparable stainless steel wire. The first wires made with the company Unitek were brittle and often broke between the premolars and molars, and only years of changes to alloys and processing temperatures fixed that.
LessonA material with the right physics can still need years of factory work before it survives in the mouth.
Credit
George F. Andreasen, University of Iowa; Unitek
1998
Clear aligners cleared
On 8 September 1998 the US Food and Drug Administration (FDA) cleared Align Technology's Align System, a series of removable clear plastic trays that each move the teeth a small step; the FDA files the device type as a sequential aligner. Align, which sells the system as Invisalign, says its clear aligner volume reached 2.6 million cases in 2025, on total revenues of about $4.0 billion.
Credit
Align Technology
2015
A public test for cephalograms
A cephalogram is a side-view X-ray of the head on which orthodontists mark landmarks, set points on bone and teeth, to measure the jaws and plan treatment. For the 2015 IEEE International Symposium on Biomedical Imaging, Ching-Wei Wang of the National Taiwan University of Science and Technology and orthodontists at Tri-Service General Hospital in Taiwan ran a challenge that scored seven automatic methods for analyzing cephalograms against the same images and the same measure. They judged automatic analysis "still a challenging and unsolved problem" and said the images and the scoring software would be made available to other researchers.
Credit
Ching-Wei Wang and colleagues
2022
Aligners printed, not molded
Aligners had been made by thermoforming: heating a plastic sheet and pressing it over a printed model of the teeth. On 31 May 2022 the FDA cleared the LuxCreo Clear Aligner System, whose summary says a 3D printer prints the shape of each aligner directly from liquid resin, which is then hardened under ultraviolet light. The cleared aligners it was compared against were thermoformed.
Credit
LuxCreo
2023
Mail-order aligners collapse
SmileDirectClub, founded in 2014, sold aligners by mail as a telehealth service: customers took their own tooth impressions at home or had a scan at one of its shops, and had check-ins every 60 days. The company says it served more than 2 million people. It filed for bankruptcy protection in September 2023 with almost US$900 million of debt, the New York Times reported, and on 8 December 2023 stopped all operations worldwide. Patients midway through treatment got no further aligners, check-ins ended and the lifetime guarantee became void. The British Dental Association said dentists would be left to "pick up the pieces", and in 2022 the District of Columbia's attorney general had settled with the company for US$500,000 over non-disclosure agreements that kept customers from posting bad reviews.
LessonCare sold through one company's platform ends when the company does, and patients midway through had to find a local dentist to finish.
Credit
SmileDirectClub
Watch for
Plans drafted in minutes
Align says its ClinCheck treatment-planning software now combines AI-driven automation with real-time control by the doctor, and that its Live Plan and Live Update features let doctors review, change and finalize plans, "reducing planning cycles from days to minutes."
Achieved whena study by people outside Align measures planning time and shows that plans finished live in the chair move teeth as accurately as plans made the older way.
Claimed by
Align Technology, in chief executive Joe Hogan's letter to stockholders, March 2026
Align moves to printing
Align says making aligners directly by 3D printing is "the next evolution in orthodontic manufacturing", still early, "with initial limited market releases beginning in 2026."
Achieved whendirectly printed Invisalign aligners are on general sale and an outside lab or clinic has published measurements of their fit or accuracy.
Claimed by
Align Technology, March 2026
Open
01
A force table for aligners
An open-hardware test jaw and a public table of the forces that aligners from many makers put on teeth. A 3D-printed upper arch holds six front teeth, each mounted on its own force and moment sensor. For the same three planned movements (for example 0.25 mm of tipping, 2° of rotation and 0.5 mm of extrusion), test at least ten aligner products, both thermoformed sheets and directly printed resins, five aligners of each, and publish the raw readings, the rig drawings and the code.
The briefCredit · unclaimed02
Aligner accuracy by brand
A public, regularly updated table of every clinical study that measured how much of a planned tooth movement aligners actually achieved, coded by brand and product generation, tooth, type of movement, how accuracy was calculated and who paid for the study. Alongside it, a list of aligner brands sold in several countries that no independent study has yet measured.
The briefCredit · unclaimed
Open 01 · the brief
A force table for aligners
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open-hardware test jaw and a public table of the forces that aligners from many makers put on teeth. A 3D-printed upper arch holds six front teeth, each mounted on its own force and moment sensor. For the same three planned movements (for example 0.25 mm of tipping, 2° of rotation and 0.5 mm of extrusion), test at least ten aligner products, both thermoformed sheets and directly printed resins, five aligners of each, and publish the raw readings, the rig drawings and the code.
Why it is still open
Bench studies cover only a few materials at a time. McKay and colleagues at Saint Louis University (BMC Oral Health, July 2023) measured extrusion of one upper incisor with two thermoformed materials (ATMOS and Zendura FLX) and one printed resin (Graphy TC-85) on a three-axis sensor from Aidin Robotics, and found that forces differed significantly between materials. A May 2026 GitHub project fits machine-learning models to aligner forces measured on two upper molars, but says its source data is not included. Searches of Zenodo, Hugging Face and GitHub in November 2026 found no public data set of aligner forces.
Built with what exists
Six-axis force and torque sensors, such as ATI Industrial Automation's Nano17 or the Aidin Robotics sensor used by McKay; a resin 3D printer such as a Formlabs Form 4 for the arch and teeth; a dental pressure-forming machine and aligner sheets sold to dental labs; printable aligner resins such as Graphy TC-85; Python for logging and plots.
First step
Print the arch, fit one sensor under an upper central incisor, and measure five aligners of one material for one movement.
Done looks like
Readings for at least ten products, three movements and five aligners each, with every aligner seated three times to show how repeatable the reading is; rig files under an open license; and a second lab that rebuilds the rig and matches two products' readings within 15%.
Open 02 · the brief
Aligner accuracy by brand
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public, regularly updated table of every clinical study that measured how much of a planned tooth movement aligners actually achieved, coded by brand and product generation, tooth, type of movement, how accuracy was calculated and who paid for the study. Alongside it, a list of aligner brands sold in several countries that no independent study has yet measured.
Why it is still open
Reviews pool studies by type of movement, and few brands appear in them. A 2025 review of rotations in Dentistry Journal included 12 studies: seven used Invisalign and the rest F22, Ordoline, 3M Clarity and one in-house printed aligner, and the six that gave a percentage accuracy ranged from 35.8% to 76.8%, calculated in different ways. A meta-analysis posted to Zenodo in October 2026 by Dorsa Rahi and Dorrin Rahi pooled 27 studies by movement type, not by brand.
Built with what exists
The Europe PMC and Crossref interfaces for finding papers; an AI model suited to pulling fields out of long documents, such as Meta's Muse Ember (see the Note "The jobs agents repeat"), with two people checking its work; a public Git repository or spreadsheet for the table.
First step
Code the 12 studies in the 2025 rotation review and compare the result with that review's own tables.
Done looks like
Every eligible study from a published search of at least three databases coded, with the search string and exclusions listed; two people agree on at least 90% of fields in a random 20% sample; and the table is refreshed every three months for a year.