Industries / Health / Healthcare / Dental
Fillings and restorations
Removing decay from a tooth and filling the hole, with the drills that cut the cavity and the materials that replace what was lost.
7
Milestones achieved, from 1845 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1845
Dentists' society bans amalgam
Amalgam is a filling made by mixing mercury with a powdered alloy of silver, tin and other metals. A review in the Journal of Conservative Dentistry traces the dispute over it to the Crawcour brothers, who brought an amalgam called "Royal Mineral Succedaneum" to America in 1833. In 1845 the American Society of Dental Surgeons demanded that members who used amalgam be expelled. The quarrel became known as the "amalgam war", and by 1856 the society had dissolved.
LessonA ban that members would not follow ended the society, not the material.
Credit
American Society of Dental Surgeons
1895
A balanced amalgam alloy
In papers of 1895 and 1896, G. V. Black reported tests of amalgam alloys and proposed one of 68.5% silver, 25.5% tin, 5% gold and 1% zinc. The same review credits his investigations with the universal acceptance of amalgam that followed.
Credit
G. V. Black
1955
Acid makes resin stick
Michael Buonocore, of the Eastman Dental Dispensary in Rochester, New York, published a simple way to make acrylic filling materials hold to enamel: treat the enamel first with phosphoric acid, which etches its surface. A 2026 history in the British Dental Journal says the paper has been read since as opening the way for adhesive dentistry, in which fillings are bonded to the tooth.
Credit
Michael G. Buonocore
1957
Drills reach 250,000 rpm
A handpiece is the dentist's hand-held drill. In 1950 the standard one was driven by a belt and turned its bur, the cutting tip, at about 6,500 revolutions per minute (rpm). In 1957, by the account of the University of the Pacific's dental museum, John Borden, a dentist in Washington, DC, filed a patent for the Airotor, a handpiece spun by compressed air whose bur reached 250,000 rpm, or about 150,000 rpm while cutting. Dentsply made it and Ritter and S.S. White sold it. It followed the Page-Chayes handpiece of 1955, which the museum calls the first angle handpiece to run above 100,000 rpm.
Credit
John Borden; Dentsply
1963
Resin fillings that match teeth
R. L. Bowen made a resin from bisphenol A and glycidyl methacrylate, now called Bis-GMA, which was stronger and shrank less on setting than the acrylics then in use. In 1963 he reported that adding silica treated with a silane, a coating that binds the filler to the resin, reinforced it. The British Dental Journal history says most later composites, the tooth-colored fillings of resin and glass or silica filler, were built on Bis-GMA. A US review body, the Council on Dental Materials and Devices, listed composites as acceptable for front-tooth fillings in 1977, and the Council on Dental Materials, Instrumentation and Equipment accepted them for the chewing surfaces of back teeth in 1981.
Credit
R. L. Bowen
1972
Cement that bonds to teeth
A. D. Wilson and B. E. Kent introduced glass-ionomer cement to dentists in the British Dental Journal as "a new translucent cement", after naming it in a chemistry journal in 1971. A 2016 review by Sharanbir Sidhu and John Nicholson says the cement holds to the tooth partly through a durable ion-exchange layer that forms over time, and releases fluoride, a burst at first and then a slow trickle, though the clinical benefit of that fluoride is not firmly proven.
Credit
A. D. Wilson and B. E. Kent
2025
Amalgam given an end date
From 1 January 2025 the European Union banned amalgam fillings except where a dentist judges them strictly necessary for a patient's specific medical needs. Member states where amalgam was at least 90% of publicly paid fillings could keep using it until 30 June 2026. On 7 November 2025, in Geneva, the parties to the Minamata Convention on Mercury, a UN treaty in force since August 2017, adopted an amendment setting a global phase-out of dental amalgam by 2034.
Credit
European Parliament and Council of the European Union; parties to the Minamata Convention
Watch for
Enamel regrown in the lab
Researchers at the University of Nottingham report a coating of elastin-like recombinamers, engineered proteins that copy the framework on which enamel forms as teeth develop. Applied to human teeth worn by acid, it grew new apatite crystals in the pattern of natural enamel and restored the enamel's mechanical properties. The tests were done in the lab, not in patients. In a university release posted by ScienceDaily in November 2026, Mata said a spin-off, Mintech-Bio, hopes to have a first product out by the following year.
Achieved whena group outside the authors' team repeats the result, or a clinical study shows the regrown layer lasting in patients' mouths.
Claimed by
Abshar Hasan, Alvaro Mata and colleagues, University of Nottingham, in Nature Communications, November 2025
Open
01
Robot fills a plastic tooth
A low-cost robot arm that places a composite filling in a prepared cavity in a typodont tooth, a plastic training tooth set in a model jaw. It dispenses the paste in thin layers, packs and shapes each one, and cures it with a dental curing light. It learns the job from recorded human demonstrations rather than from a hand-written path.
The briefCredit · unclaimed02
Repeat the enamel coating test
An independent lab test of the University of Nottingham's enamel-regrowing coating. Wear down enamel blocks cut from cattle teeth with acid, coat half of them by the published method, keep them in artificial saliva, and measure the new mineral layer and its hardness against the uncoated half. Publish all raw data.
The briefCredit · unclaimed
Open 01 · the brief
Robot fills a plastic tooth
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A low-cost robot arm that places a composite filling in a prepared cavity in a typodont tooth, a plastic training tooth set in a model jaw. It dispenses the paste in thin layers, packs and shapes each one, and cures it with a dental curing light. It learns the job from recorded human demonstrations rather than from a hand-written path.
Why it is still open
Dental robots so far cut teeth or drill for implants. The one filling robot found, built at Riphah International University in Pakistan and reported in September 2025, pushed composite from a syringe into a single wax tooth, one layer at a time, with a camera to judge when the cavity was full. The paper reports no measure of how well the filling fitted. A search of Hugging Face's datasets found no public recordings of dental filling tasks.
Built with what exists
An SO-101 arm recorded and trained with Hugging Face's LeRobot (see the Note "No download"), or Runway's Praxis-1, a robot model whose weights anyone can download under the Apache 2.0 license (see the Note "Open robot model weights"); composite in syringe tips and a handheld LED curing light, worn with orange protective glasses; typodont molars with identical cavities; a desktop dental scanner and the free tools Open3D or CloudCompare to compare each filling's shape with the target.
First step
Cut ten identical cavities in typodont molars, record 50 remote-controlled fillings with LeRobot, and train a first model on them.
Done looks like
Twenty filmed attempts in a row on fresh teeth, each scanned after curing and published with the recordings. For each, report the share of the cavity filled, any gap at the edge seen under 10x magnification, and excess material above the margin in millimeters, beside the same numbers for five dental students filling the same teeth.
Open 02 · the brief
Repeat the enamel coating test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent lab test of the University of Nottingham's enamel-regrowing coating. Wear down enamel blocks cut from cattle teeth with acid, coat half of them by the published method, keep them in artificial saliva, and measure the new mineral layer and its hardness against the uncoated half. Publish all raw data.
Why it is still open
The coating's results come from its developers' own lab tests, and a November 2026 report from the university says long-term performance in patients is not yet shown. No repetition by an outside group turned up in this session's search.
Built with what exists
Cattle incisors from a butcher, a usual stand-in for human enamel in wear studies; the recombinamer protein made as the paper's methods describe, or requested from the authors; citric acid for the wear step; a nanoindenter or microhardness tester and a scanning electron microscope in a university materials lab.
First step
Read the paper's methods, write to the authors about the protein and its supplier, and collect and section 20 cattle teeth.
Done looks like
At least 30 coated and 30 uncoated blocks, measured by someone who does not know which is which, with the thickness of new mineral in micrometers and hardness in gigapascals published beside the paper's own figures.